journal article·2013-01

In situ measurement of coefficient of thermal expansion in hardening concrete and its effect on thermal stress development

Jung Heum Yeon, Seongcheol Choi, Moon C. Won

Publisher page

Abstract

Abstract It is well known that the coefficient of thermal expansion (CTE) has substantial effects on behavior and performance of concrete structures. In this study, a time-dependent variation of CTE in hardening concrete was examined based on a series of field experiments using a device called impervious non-stress cylinder (INC). The results showed consistent trends: (1) the CTE at the time of setting is about twice as high as the CTE in the stabilized stage and (2) after the CTE’s initial sudden drop, it starts to slightly increase for a certain period of time and then stabilizes. The present study also quantitatively investigated the effect of time-dependent CTE variation on thermal stress developments. The results revealed that the effect of CTE’s time-dependent variation is non-negligible; rather, it may be of great importance for accurate assessments of early-age cracking potential and the later-age behavior and response of concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Bažant · 1988
2. Springenschmid R. Thermal cracking in concrete at early ages. In: Proc. of the Int. RILEM Symposium, E&FN Spon, London; 1994.10.1201/9781482271294 ↗
3. 1998
4. Nonlinear analysis of temperature and moisture distributions in early-age concrete structures based on degree of hydration
5. Tazawa E. Autogenous shrinkage of concrete. In: Proc. the Int. Workshop Organized by JCI, E&FN Spon, London; 1999.10.1201/9781482272123 ↗
6. Emborg · 1989
7. Neville · 1995
8. Horizontal cracking in continuously reinforced concrete pavements
9. Horizontal cracking of continuously reinforced concrete pavement under environmental loadings10.1016/j.conbuildmat.2011.04.069 ↗
10. Thermal expansion characteristics of hardened cement paste and concrete
11. Coefficient of thermal expansion of cement paste and concrete: mechanisms of moisture interaction10.1617/s11527-006-9086-z ↗
12. Thermal dilation and internal relative humidity of hardened cement paste10.1617/s11527-006-9108-x ↗
13. Effect of relative humidity on coefficient of thermal expansion of hardened cement paste and concrete10.3141/2113-10 ↗
14. Delayed thermal dilations of cement paste and concrete due to mass transport10.1016/0029-5493(70)90108-1 ↗
15. Experimental study of thermal expansion of hardened cement paste
16. Interaction between thermal dilation and autogenous deformation in high performance concrete10.1007/BF02482205 ↗
17. Determination of the coefficient of thermal expansion of high-performance concrete from initial setting10.1007/BF02482088 ↗
18. Cusson D, Hoogeveen TJ. Measuring early-age coefficient of thermal expansion in high-performance concrete. In: Int. RILEM conf. on volume changes of hardening concrete: testing and mitigation, Lyngby, Denmark; 2006.10.1617/2351580052.034 ↗
19. A model for prediction the coefficient of thermal expansion of cementitious paste10.2306/scienceasia1513-1874.2009.35.057 ↗
20. A volumetric technique for measuring the coefficient of thermal expansion of hardening cement paste and mortar10.1016/j.cemconres.2010.03.021 ↗
21. Measured strains in post-tensioned concrete parking deck made with shrinkage-compensating concrete
22. Impact of time-dependent thermal expansion coefficient on the early-age volume changes in cement pastes10.1016/j.cemconres.2011.01.003 ↗
23. Dimensional changes of hardened portland cement pastes caused by temperature changes
24. Immediate and delayed thermal expansion of hardened cement paste10.1016/0008-8846(82)90007-2 ↗
25. Thermal expansion kinetics: method to measure permeability of cementitious materials: I, theory10.1111/j.1151-2916.2000.tb01627.x ↗
26. Experimental measurement of concrete thermal expansion
27. Thermal strain and drying shrinkage of concrete structures in the field
28. Texas Department of Transportation. Standard specifications for construction and maintenance of highways, streets, and bridges. Texas Department of Transportation; 2004.
29. Crack-free high-performance concrete structures
30. Baroghel-Bouny V. Texture and moisture properties of ordinary and high-performance cementitious materials. In: Proceedings of seminaire RILEM, Arles; 1996.
31. Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model10.1016/j.conbuildmat.2012.03.005 ↗
32. ASTM. Standard test method for time of setting of concrete mixtures by penetration resistance. Am Soc Test Mater, Philadelphia; 2008.
33. Monitoring of concrete at very early age using stiff SOFO sensor10.1016/S0958-9465(99)00037-2 ↗
34. Variation of crack width over time in continuously reinforced concrete pavement10.3141/2037-01 ↗
35. Improvement of testing procedures for concrete coefficient of thermal expansion
36. Measurement and analysis of early-age concrete strains and stresses: continuously reinforced concrete pavement under environmental loading
37. Simulation of the thermal stress in mass concrete using a thermal stress measuring device10.1016/j.cemconres.2008.12.008 ↗
38. Finite element simulation of thermal cracking in massive hardening concrete elements using degree of hydration based material laws10.1016/S0045-7949(02)00270-5 ↗
39. Effects of environmental action on thermal stress analysis of Karaj concrete arch dam
40. Prediction of cracking within early-age concrete due to thermal, drying and creep behavior10.1016/S0008-8846(02)00743-3 ↗
41. Numerical determination of long-range stress history from strain history in concrete
42. Ghali · 2002
43. CEB-FIP Model Code · 1993