Testing and numerical modelling of buckling failure of masonry walls
Source abstract
Abstract
Abstract An experimental and numerical research on the buckling failure of brick masonry walls is presented. The research includes laboratory experiments on the response of a large number of 1/4 scale masonry walls characterized by different combinations of slenderness ratios and loading eccentricities. Experimental results by different authors are also considered and compared with those obtained in the present research. In addition, a detailed numerical simulation of a selection of experiments has been carried out using a well-known micro-modelling technique. The numerical application has provided satisfactory predictions of both the ultimate capacity and lateral deformability of walls up to the buckling failure. The paper includes a discussion on the influence of some relevant parameters, such as the masonry tensile strength, wall slenderness and load eccentricity, on the load capacity of the walls. The application of the analytical method provided by EN 1996-1-1:2005 is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Civil and Structural Engineering Research · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. The design of masonry compression members
2. The elastic buckling of brittle columns
3. Stability and load capacity of members with no tensile strength10.1061/JSDEAG.0002954 ↗
4. Stability of masonry piers10.1016/0020-7683(75)90052-9 ↗
5. Buckling of masonry pier under its own weight10.1016/0020-7683(80)90042-6 ↗
6. Cracked nonlinear masonry stability under vertical and lateral loads10.1061/(ASCE)0733-9445(1993)119:1(69) ↗
7. Influence of nonlinear constitutive law on masonry pier stability10.1061/(ASCE)0733-9445(1997)123:10(1303) ↗
8. FEM and analytical solutions for buckling of nonlinear masonry members10.1061/(ASCE)0733-9445(1997)123:1(104) ↗
9. Stability of nonlinear masonry members under combined load10.1016/j.compstruc.2008.01.003 ↗
10. Schultz AE, Mueffelman JG, Ojard NJ. Critical axial loads for transversely loaded masonry walls. In: 12th int brick/block masonry conf proc, vol. III, Madrid; 2000. p. 1633–46.
11. Influence of transverse loading on the stability of slender unreinforced masonry walls10.1016/j.engstruct.2008.02.016 ↗
12. Martini K. Finite element studies in the out-of-plane failure of unreinforced masonry. In: Choi CK, editor. Proceedings of the international conference on computing in civil and building engineering, vol. 1. Korea; 1997.
13. Ancient structures and modern analysis: investigating damage and reconstruction at Pompeii10.1016/S0926-5805(98)00070-3 ↗
14. Effect of eccentricity on the compressive strength of brickwork
15. Watstein D, Allen MH. Structural performance of clay masonry assemblages built with high-bond organic-modified mortars. In: Second international brick masonry conference; 1970. p. 99–112.
16. Kirtschig K, Anstötz W. Kinckuntersuchungen an mauerwerksproben. In: Proceedings of nineth international brick/block masonry conference 2002–2009; 1991.
17. Fattal SG, Cattaneo LE. Structure performance of masonry walls under compression and flexure. Washington (DC): National Bureau of Standards (NIST); 1976.10.6028/NBS.BSS.73 ↗
18. Hasan SS, Hendry AW. Effect of slenderness and eccentricity on the compressive strength of walls. In: Proceedings of the fourth international brick masonry conference (Brugge). Paper 4.d.3; 1976.
19. Hendry · 1990
20. The design of plain masonry walls10.1139/l80-031 ↗
21. Vertical load bearing masonry – the Danish approach
22. Simplified non-linear design of unreinforced walls
23. EN 1996-1-1:2005. Eurocode 6. Design of masonry structures. Part 1-1: common rules for reinforced and unreinforced masonry structures. European Committee for Standardization, Brussels, Belgium; 2005.
24. Kukulski W, Lugez J. Résistance des murs en béton non-armé soumis a des charges verticales. Cahiers 681 CSTB; 1966.
25. Comments on the design of masonry bearing walls according to ENV 1996-1-1
26. Sinha BP, Maurenbrecher HP, Hendry AW. Model and full-scale tests on a fivestorey cross-wall structure under lateral loading. In: Proceedings of the second international brick masonry conference, UK; 1971.
27. Samarashinghe W, Hendry AW. The strength of brickwork under biaxial tensile and compressive stress. In: Proceedings of the seventh international symposium on load bearing brickwork. London; 1982.
28. Failure of shear-stressed masonry – an enlarged theory, tests and application to shear walls
29. The strength of brick masonry under biaxial tension compression
30. Lobato M. Simple method for the analysis of hollow masonry walls subjected to in plane loading. PhD dissertation, Universitat Politècnica de Catalunya, Barcelona; 2009 (in Spanish).
31. Charry J. Experimental study on the response of brick masonry walls subjected to shear forces. PhD dissertation, Universitat Politècnica de Catalunya, Barcelona; 2010 (in Spanish).
32. EN 772-1. Methods of test for masonry units. Part 1: determination of the compressive strength. European Committee for Standardization, Brussels, Belgium; 2002.
33. EN 1015-11. Methods of test for mortar masonry. Part 11: determination of flexural and compressive strength of hardened mortar. European Committee for Standardization, Brussels, Belgium; 1999.
34. EN 1052-1. Methods of test for masonry. Part 1: determination of compressive strength. European Committee for Standardization, Brussels, Belgium; 1999.
35. Multisurface interface model for analysis of masonry structures
36. TNO Diana. DIANA-finite element analysis. The Netherlands; 2005.
37. Dry joint stone masonry walls subjected to in-plane combined loading10.1061/(ASCE)0733-9445(2005)131:11(1665) ↗
38. EHE-08. Structural concrete code (in Spanish). Ministerio de Fomento, Madrid, Spain; 2008.
39. Van der Pluijm R. Out-of-plane bending of masonry. Behaviour and strength. PhD thesis. Eindhoven University of Technology; 1999.
40. Lourenço PB. A user/programmer’s guide for the micro-modeling of masonry structures. TU Delft, report no. 03.21.1.31.35. Delft University of Technology, Delft. The Netherlands; 1996.