Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study
Source abstract
Abstract
Abstract This paper presents an experimental research work in order to obtain the main hygrothermal properties of different mixes of lightweight concrete (LWC) produced from expanded clay. Nowadays, the current state of art assumes an exponential relationship between the moisture content and the thermal properties for this kind of building material. The prime novelty of this study is the experimental determination of the actual hygrothermal properties for different LWC mixes with material densities ranging from 900 to 1400 kg/m3, as well as the least squares best-fitting curves in order to obtain accurate mathematical expressions that permit us to optimize the hygrothermal behavior of new construction products made up of LWC. In this way, the experimental data set is compared with those for the Standard and a new analytical solution is obtained, giving place to a new analytical solution taking into account the relationship among the heat, moisture and density. Finally, the results and conclusions reached in this work are exposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hygrothermal properties of building materials · Masonry and Concrete Structural Analysis · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Determination of the moisture capacity of porous building materials
2. Steady state theoretical model of fired clay hollow bricks for enhanced external wall thermal insulation10.1016/j.buildenv.2007.10.005 ↗
3. Sandberg I. Effects of moisture on the thermal performance of insulating materials. In: Trechsel HR, Bomberg MT, editors. Moisture control in buildings: the key factor in mold prevention. 2nd ed. New York; 2009.
4. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
5. Optimization of the configuration of 290×140×90 hollow clay bricks with 3-D numerical simulation by finite volume method10.1016/j.enbuild.2008.03.010 ↗
6. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete10.1016/j.conbuildmat.2012.02.053 ↗
7. Thermal design optimization of lightweight concrete blocks for internal one-way spanning slabs floors by FEM10.1016/j.enbuild.2009.08.005 ↗
8. Strength and thermal conductivity in lightweight building materials10.1007/s10064-008-0166-x ↗
9. Elevated-temperature thermal properties of lightweight foamed concrete10.1016/j.conbuildmat.2010.07.016 ↗
10. Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: experimental, modelling and parametric studies10.1016/j.conbuildmat.2011.12.096 ↗
11. Gawin D, Kosny J, Desjarlais A. Effect of moisture on thermal performance and energy efficiency of buildings with lightweight concrete walls. In: Proceedings ACEEE summer study on energy efficiency in buildings, vol. 3; 2000. pp. 3149–160. .
12. Two-dimensional hygrothermal transfer in porous building materials10.1016/j.applthermaleng.2010.07.006 ↗
13. Modelling of heat and moisture transfer in buildings I. Model program10.1016/S0378-7788(02)00021-X ↗
14. An experimental data set for benchmarking 1-D, transient heat and moisture transfer models of hygroscopic building materials. Part I: experimental facility and material property data10.1016/j.ijheatmasstransfer.2007.03.026 ↗
15. Kreith · 2000
16. Contribution to analytical and numerical study of combined heat and moisture transfers in porous building materials10.1016/j.buildenv.2010.12.020 ↗
17. Non-linear hygrothermal failure analysis of an external clay brick wall by FEM – a case study10.1016/j.conbuildmat.2010.12.039 ↗
18. Heat, air and moisture transfer through hollow porous blocks10.1016/j.ijheatmasstransfer.2008.11.003 ↗
19. UNE-EN ISO 10456:1999. Building materials and products. Procedures for determining declared and design thermal values. (ISO 10456:1999).
20. ASTM C 1363-97. Standard test method for the thermal performance of building assemblies by means of a Hot Box apparatus.
21. UNE-EN ISO 8990:1997. Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot-box (ISO 8990:1994).
22. ISO 12571:2000 Standard. Hygrothermal performance of building materials and products. Determination of hygroscopic sorption properties.
23. UNE-EN ISO 7345:1996. Thermal insulation. Physical quantities. (ISO 7345:1987)
24. Fox · 2008
25. Dunesche · 2010
26. Chapman · 2008
27. Künzel HM. Simultaneous heat and moisture transport in building components, one- and two-dimensional calculation using simple parameters. Stuttgart (Germany): PhD dissertation, IRB-Verlag Fraunhofer-Institut für, Bauphysik; 1995.
28. Krus M. Moisture transport and storage coefficients of porous mineral building materials. Theoretical principles and new test methods. Stuttgart (Germany). Internal report, Fraunhofer IRB Verlag; 1996.
29. Kumaran KM. Heat, air and moisture transport in envelope parts. Final report. Task 3 material properties. Leuven. Internal report, IEA. ECBCS; 1996.
30. Kumaran KM. Moisture control in buildings. In: Heinz R. ASTM Manual Series, Trechsel editorial series; 1994.
31. Water vapor permeability measurements of common building materials
32. Burch · 1997