journal article·2014-12Open access

Fire protection of light and massive timber elements using gypsum plasterboards and wood based panels: A large-scale compartment fire test

Dionysios I. Kolaitis, Eleni K. Asimakopoulou, Maria A. Founti

Abstract

A full-scale compartment fire test was performed to assess gypsum plasterboards and wood based panels as cladding materials for the fire protection of light and massive timber elements. The test compartment was constructed using both the timber frame and the cross laminated timber techniques; a wood crib was used to achieve realistic fire conditions. Temperature measurements and optical inspection evidence suggested that gypsum plasterboards offered adequate fire protection since they did not fail and no charring was observed in the timber elements. A free standing wall inside the test compartment, protected by wood-based panels, partially collapsed. Measured values of characteristic failure times, such as time to failure of fire protection cladding and time to onset of charring, were compared to relevant Eurocode correlations, achieving good levels of agreement. The obtained set of measurements, describing the time evolution of a large variety of physical parameters, such as gas and wall layer temperatures, can be used for validation of relevant advanced fire simulation tools.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire dynamics and safety research · Fire effects on concrete materials · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Wood as a building material in the light of environmental assessment of full life cycle of four buildings10.1016/j.conbuildmat.2013.11.066 ↗
2. Fire safety in timber buildings: Technical guideline for Europe
3. EN 1995-1-2. Eurocode 5, Design of timber structures – Part 1–2: General – structural fire design. Brussels: European Committee for Standardization; 2004.
4. Fire protection of wood by different gypsum plasterboards10.1002/(SICI)1099-1018(199901/02)23:1<45::AID-FAM662>3.0.CO;2-6 ↗
5. Development of a solid reaction kinetics gypsum dehydration model appropriate for CFD simulation of gypsum plasterboard wall assemblies exposed to fire10.1016/j.firesaf.2013.01.029 ↗
6. Gagnon · 2011
7. ISO 834–1 · 1999
8. Experimental analysis of cross-laminated timber panels in fire10.1016/j.firesaf.2009.07.007 ↗
9. Temperature distribution within glued laminated timber during a standard exposure test10.1016/j.matdes.2008.05.063 ↗
10. Dagenais C, Osborne L, Benichou N. Full-scale fire performance of cross-laminated timber walls and floors. In: Proceedings of the 13th international conference and exhibition on fire science and engineering. June 24–26. Windsor, UK, London: Interscience Communications Limited; 2013. p. 1157–68.
11. Schmid J, Menis A, Fragiacomo M, Bostroem, Just A. The load-bearing performance of CLT wall elements in full scale fire tests. In: Proceedings of the 13th international conference and exhibition on fire science and engineering. June 24–26, Windsor, UK, London: Interscience Communications Limited; 2013, p. 1143–55.
12. Teibinger M. Fire resistance of timber constructions – evaluation of improved design models. In: Proceedings of the 13th international conference and exhibition on fire science and engineering. June 24–26, Windsor, UK, London: Interscience Communications Limited; 2013, p. 1465–76.
13. Experimental study on the performance of a load-bearing steel stud gypsum board wall assembly exposed to a real fire10.1016/j.firesaf.2011.09.001 ↗
14. BRE large compartment fire tests – characterising post-flashover fires for model validation10.1016/j.firesaf.2007.04.002 ↗
15. Temperatures during fire tests on structure and its prediction according to Eurocodes10.1016/j.firesaf.2008.05.002 ↗
16. Studies on fire characteristics in over- and underventilated full-scale compartments10.1177/0734904110363106 ↗
17. Rise in structural steel temperatures during ISO 9705 room fires10.1016/j.firesaf.2011.08.001 ↗
18. Post-flashover fires in light and heavy timber construction compartments10.1177/0734904102020002074 ↗
19. EN1991-1-2. Eurocode 1: Actions on structures, Part 1–2: General actions on structures exposed to fire, 2002, European Committee for Standardization, Brussels.
20. Frangi A, Bochicchio G, Ceccotti A, Lauriola MP. Natural full-scale fire test on a 3 storey XLam timber building. In: Proceedings of the 10th world conference on timber engineering. June 2–5, Miyazaki, Japan; 2008.
21. McGregor C, Hadjisophocleous G, Craft S. Contribution of cross laminated timber panels to room fires. In: Proceedings of the 13th international conference and exhibition on fire science and engineering. June 24–26, Windsor, UK, London: Interscience Communications Limited; 2013, p. 1453–64.
22. Large scale natural fire tests on protected engineered timber floor systems10.1016/j.firesaf.2010.02.006 ↗
23. Wolfe · 2009
24. Experimental and computational studies of compartment fire behaviour10.1016/j.buildenv.2010.05.021 ↗
25. ISO 1716 · 2002
26. DiNenno · 2002
27. Tewarson A. Fully developed enclosure fires of wood cribs. In: Proceedings of the 20th international symposium on combustion. August 12–17, Michigan, UK: Elsevier; 1985, p. 1555–66.10.1016/S0082-0784(85)80650-0 ↗
28. An experimental investigation on temperature profile of buoyant spill plume from under-ventilated compartment fires in a reduced pressure atmosphere at high altitude10.1016/j.ijheatmasstransfer.2012.05.058 ↗
29. Kolaitis DI, Asimakopoulou EK, Founti MA, Touliatos P. Experimental investigation of the fire behaviour of contemporary timber construction techniques (in Greek). Greek Fire Academy Report; 2011.
30. Effects of radiation on temperature measurement in a fire environment
31. Structural fire design according to Eurocode 5 – design rules and their background10.1002/fam.873 ↗
32. A two-thermocouples probe for radiation corrections of measured temperatures in compartment fires10.1016/j.firesaf.2004.03.002 ↗
33. Thermocouple response in fires, Part 1: consideration in flame temperature measurements by a thermocouple10.1177/0734904110386187 ↗
34. Forced convection heat transfer correlations for flow in pipes past flat plates, single cylinders, single spheres and for flow in packed beds and tube bundles10.1002/aic.690180219 ↗
35. Thermocouple response in fires, Part 2: validation of virtual thermocouple model for fire codes10.1177/0734904110386188 ↗