journal article·2014-11

The theoretical analysis of the RAP aged asphalt influence on the performance of asphalt emulsion cold recycled mixes

Jinhai Yan, Haoran Zhu, Zhixiang Zhang, Lei Gao, Stephane Charmot

Publisher page

Abstract

Abstract Traditionally, reclaimed asphalt pavement (RAP) was commonly recognized as “black rock” in cold recycling mixes, so that aging of the asphalt in the RAP normally was not taken into account during the cold recycling mix design. The objective of this research was to evaluate the influence of aged asphalt in the RAP on the performance of asphalt emulsion cold mixes. Firstly, the RAP material was simulated in the laboratory using the asphalt long-term aging procedure. Secondly, the properties of the four different mixes were evaluated based on Marshall stability, indirect tensile strength, dynamic modulus and fatigue life which associate with aged asphalt and cement. Finally, a finite element model for cold recycled mix was established with the aim to theoretically evaluate the effect of the aged asphalt in the RAP. The results indicated that the existence of the aged asphalt and cement in the RAP could improve the indirect tensile strength, high temperature stability, moisture resistance and fatigue performance of asphalt emulsion cold recycled mixes. Furthermore, the analysis by finite element method (FEM) showed that the simulation in terms of the effect of the aged asphalt was basically consistent with the laboratory results. Essentially, the existence of the aged asphalt in the RAP could reduce the stress and strain concentration in the interphase between the aggregate and virgin asphalt. Therefore, RAP should be not considered as “black rock” in cold recycled mixes based on this research.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Kandhal PS, Mallick RB. Pavement recycling guidelines for state and local governments, participant’s reference book. Publication FHWA-SA-98-042, Federal Highway Administration; 1997.
2. Long-term performance of reflective cracking mitigation techniques in Nevada10.3141/2044-10 ↗
3. Performance evaluation of modified cold in-place asphalt recycling
4. Case histories of cold in-place recycled asphalt pavements in central Oregon
5. Experience with cold in-place recycling as a reflective crack control technique – twenty years later10.3141/1869-06 ↗
6. Thomas T, Kadrmas A. Performance-related tests and specifications for cold in-place recycling: lab and field experience. CD-ROM. Transportation Research Board of the National Academies. Washington DC: TRB; 2003.
7. Cold in-place recycling pavement rutting prediction model using grey modeling method10.1016/j.conbuildmat.2006.06.001 ↗
8. Neural network model for resilient modulus of emulsified asphalt mixtures10.1016/j.conbuildmat.2007.01.031 ↗
9. Sustainable pavements-environmental, economic and social benefits of in-situ pavement recycling10.3141/2084-11 ↗
10. Energy consumption comparison for different asphalt pavements rehabilitation techniques used in Chile10.1016/j.resconrec.2006.02.005 ↗
11. Ten-year performance review of in situ hot-mix recycling in Ontario10.3141/1684-23 ↗
12. Assessment of fracture parameters to predict field cracking performance of cold in-place recycling mixtures10.3141/2155-04 ↗
13. Mixed-mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration10.1016/j.conbuildmat.2013.12.079 ↗
14. Performance evaluation of cold in-place recycling mixtures using emulsified asphalt based on dynamic modulus, flow number, flow time, and raveling loss10.1007/s12205-012-1376-0 ↗
15. Engineered cold in-place recycling project: blue Earth county state aid highway 20, Minnesota10.3141/1813-14 ↗
16. Cross · 2007
17. The correlativity analysis between the aggregates characteristics of reclaimed asphalt pavement and the performance of emulsion cold recycling mixture
18. Pursuit of the simple performance test for asphalt mixture rutting
19. Fatigue characterization of bituminous mixes using a simplified test
20. An experimental study on the fatigue properties of emulsion and foam cold recycled mixes10.1016/j.conbuildmat.2010.04.044 ↗
21. Laboratory investigation of mixing HMA with RAP10.1177/0361198105192900105 ↗
22. Investigation into three-layered HMA mixtures10.1016/j.compositesb.2005.08.005 ↗
23. Micromechanical modeling of polymer modified asphalt at low temperatures10.1106/AD3B-P1L9-301G-497X ↗
24. Analytical modeling of three-layered HMA mixtures10.1061/(ASCE)1532-3641(2007)7:2(140) ↗
25. Laboratory study of full depth reclamation (FDR) mixes10.3141/1813-13 ↗
26. Characteristics of cold processed asphalt millings and cement–emulsion mix10.3141/1767-01 ↗
27. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗