journal article·2016-08

Influence of magnesium sulphate concentration on durability of concrete containing micro-silica, slag and limestone powder using durability index

Davood Mostofinejad, Farzaneh Nosouhian, Hamed Nazari-Monfared

Publisher page

Abstract

Abstract Presented experimental study deals with the durability of concretes containing different additives of micro-silica, blast furnace slag and limestone powder as cement replacement with various ratios, exposed to magnesium sulphate environments with different concentrations of 5%, 10% and 14.7% (saturated concentration). Furthermore, the influence of different water-cement (w/c) ratios and also the parameter of time on reducing the compressive strength and increasing the volume of the concrete are investigated in the research process. To do so, 36 mix designs including concretes containing 0, 15 and 30% limestone powder as cement replacement in four conditions of cement replacement with 10% micro-silica, 10% blast furnace slag, 20% blast furnace slag and no cement replacement with slag or micro-silica were considered. Three w/c ratios of 0.3, 0.4 and 0.5 were considered and 864 concrete prisms with the size of 70 mm × 70 mm × 70 mm were produced. Compressive strength of the specimens at 140 and 280 days of sulphate exposure and also volume variations at 70, 140, 210 and 280 days of sulphate exposure were assessed to investigate the durability of different sulphate submerged concretes. In order to compare the durability of the concretes in each environment, a durability index was developed and the most durable concretes were introduced. The 5% magnesium sulphate solution was identified as the most destructive environment and concrete with w/c ratio of 0.3 containing 15% limestone powder and 20% slag was recognized as the most durable concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Maslehuddin, plain and blended cements10.1061/(ASCE)0899-1561(1994)6:2(201) ↗
2. The confused world of sulfate attack on concrete10.1016/j.cemconres.2004.04.004 ↗
3. Ettringite formation and sulfate attack on concrete
4. Durability of concrete exposed to leaching and external sulphate attacks10.1016/j.cemconres.2009.07.021 ↗
5. Effect of pozzolanic additives on structure and chemical durability of concrete10.1016/j.proeng.2013.04.127 ↗
6. Does gypsum formation during sulfate attack on concrete lead to expansion?10.1016/S0008-8846(99)00211-2 ↗
7. Magnesium sulfate attack on hardened blended cement pastes under different circumstances10.1016/S0008-8846(02)00801-3 ↗
8. Study of thaumasite and ettringite phases formed in sulfate/blast furnace slag slurries using XRD full pattern fitting10.1016/S0958-9465(01)00085-3 ↗
9. Enhancing microstructure and durability of concrete from ground granulated blast furnace slag and metakaolin as cement replacement materials10.1016/j.jmrt.2013.03.010 ↗
10. A discussion of the paper “Durability of the hydrated limestone–silica fume Portland cement mortars under sulphate attack” by J. Zeliæ, R. Krstuloviæ, E. Tkalčec and P. Krolo110.1016/S0008-8846(00)00318-5 ↗
11. Use of mineral admixtures to improve the resistance of limestone cement concrete against thaumasite form of sulfate attack10.1016/j.cemconcomp.2013.01.007 ↗
12. Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powder10.1016/j.cemconcomp.2014.10.001 ↗
13. Improvement on sulfate resistance of blended cement with high alumina slag10.1016/j.cemconres.2011.09.008 ↗
14. Investigation of concrete exposed to dual sulfate attack10.1016/j.cemconres.2014.06.002 ↗
15. Long-term evolution of delayed ettringite and gypsum in Portland cement mortars under sulfate erosion10.1016/j.conbuildmat.2008.03.002 ↗
16. Effects of mix composition and water–cement ratio on the sulfate resistance of blended cements10.1016/j.cemconcomp.2006.11.007 ↗
17. Attack on plain and blended cements exposed to aggressive sulfate environments10.1016/S0958-9465(01)00082-8 ↗
18. Microstructural and microanalytical studies of sulfate attack. I. Ordinary portland cement paste10.1016/0008-8846(92)90033-R ↗
19. Strength deterioration of high strength concrete in sulfate environment10.1016/S0008-8846(99)00106-4 ↗
20. Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings – an experimental study10.1016/j.conbuildmat.2014.04.031 ↗
21. The role of pH in thaumasite sulfate attack10.1016/j.cemconres.2005.01.003 ↗
22. Size effect of concrete samples on the kinetics of external sulfate attack10.1016/j.cemconcomp.2011.08.014 ↗
23. Experimental study on mechanical properties of different lightweight aggregate concretes10.5267/j.esm.2014.4.003 ↗
24. Mechanism of sulfate attack: a fresh look: Part 1: summary of experimental results10.1016/S0008-8846(02)00724-X ↗
25. Study on the expansion of concrete under attack of sulfate and sulfate–chloride ions10.1016/j.conbuildmat.2012.05.003 ↗
26. Sulfate attack research — whither now?10.1016/S0008-8846(01)00510-5 ↗
27. ACI Committee 363 · 1998
28. ACI Committee 211 · 1998
29. Self-compacting high-performance concrete
30. The protective layer and decalcification of C-S-H in the mechanism of chloride corrosion of cement paste10.1016/j.cemconres.2004.03.023 ↗
31. Characteristics of the attack of cement paste by MgSO4 and MgCl2 from the pore structure measurements10.1016/0008-8846(90)90125-H ↗
32. Modeling the effects of solution temperature and concentration during sulfate attack on cement mortars10.1016/S0008-8846(01)00727-X ↗
33. Sulfate resistance of blended cement: prediction and relation with flexural strength10.1016/0008-8846(90)90073-7 ↗