Flexural fatigue behavior of polymer-modified pervious concrete with single sized aggregates
Source abstract
Abstract
Abstract The objective of this research is to evaluate the flexural fatigue behavior of polymer-modified pervious concrete (PPC) with single sized aggregates which could be used in base course of infrastructures. Three aggregate sizes (27.5 mm, 32.5 mm, and 37.5 mm) were selected for single sized aggregate mixtures. A laboratory testing program was conducted obtaining the fatigue lives of PPC at various stress levels and stress ratios. 65 beam specimens of 150 mm × 150 mm × 550 mm totally were produced for each mix type, ten of which were adopted to determine the static flexural strength of PPC prior to fatigue testing. To incorporate the effects of stress level S , stress ratio R and survival probability, equivalent fatigue-life was employed to study the fatigue equation of PPC. The studies indicate that statistical distribution of equivalent fatigue life of PPC approximately followed the two-parameter Weibull distribution. The S - N relation curves and regression equations corresponding to different survival probabilities (0.5–0.95) were obtained by regression analysis. Based on these results, the fatigue life ranking as PPC-27.5 > PPC-32.5 > PPC-37.5 was declared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. ACI (American Concrete Institute). Report on pervious concrete. ACI Committee 522, 2010, Farmington Hills, MI.
2. Potential use of pervious concrete for maintaining existing mature trees during and after urban development10.1016/j.ufug.2009.08.006 ↗
3. Slip-related characterization of gait kinetics: investigation of pervious concrete as a slip-resistant walking surface10.1016/j.ssci.2013.01.023 ↗
4. Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio10.1016/j.cemconres.2004.12.009 ↗
5. Investigation into laboratory abrasion test methods for pervious concrete10.1061/(ASCE)MT.1943-5533.0000683 ↗
6. Reduction of tire-pavement noise by porous concrete pavement10.1061/(ASCE)MT.1943-5533.0000809 ↗
7. The relationship between porosity and strength for porous concrete10.1016/j.conbuildmat.2011.05.005 ↗
8. High-strength high-porosity pervious concrete pavement10.4028/www.scientific.net/AMR.723.361 ↗
9. Laboratory evaluation of permeability and strength of polymer-modified pervious concrete10.1016/j.conbuildmat.2009.10.025 ↗
10. Effects of macrosynthetic fibers on pervious concrete properties10.1061/(ASCE)MT.1943-5533.0001213 ↗
11. A method for comparing cores and cast cylinders in virgin and recycled aggregate pervious concrete
12. Influence of aggregate type and size on properties of pervious concrete10.1016/j.conbuildmat.2014.12.073 ↗
13. Effect of aggregate grading on pervious concrete properties
14. Effect of aggregate coating thickness on pore structure features and properties of porous ecological concrete10.1680/macr.12.00234 ↗
15. Cement paste characteristics and porous concrete properties10.1016/j.conbuildmat.2006.12.007 ↗
16. New approach to proportion pervious concrete10.1016/j.conbuildmat.2014.03.025 ↗
17. The influence of aggregate size and gradation on acoustic absorption of enhanced porosity concrete
18. A modified method for the design of pervious concrete mix10.1016/j.conbuildmat.2014.09.088 ↗
19. Strength, fracture and fatigue of pervious concrete10.1016/j.conbuildmat.2013.01.006 ↗
20. M.L. Zheng, Study on Porous Concrete Permeable Base, Thesis for Chang’an University, 2004.
21. Y.P. Sheng, Road Performance and Mix Design of Porous Concrete with Non-vibration Molding, Dissertation for Chang’an University, 2006.
22. Internal structure and failure mechanism of porous cement concrete with same sized aggregate
23. Ministry of Construction, Standard for test method of mechanical properties on ordinary concrete (GB/T 50081-2002), Beijing, China, 2003.
24. Flexural fatigue strength of plain concrete
25. Flexural fatigue behavior of cement concrete
26. Fatigue strength of steel fibre reinforced concrete in flexure10.1016/S0958-9465(02)00102-6 ↗
27. Physical and statistical aspects of fatigue
28. Parameters in distribution of fatigue life10.1061/JMCEA3.0000418 ↗
29. ASCE fatigue reliability: introductin
30. ASCE fatigue reliability: variable amplitude loading
31. Fatigue analysis of plain concrete in flexure10.1061/(ASCE)0733-9445(1986)112:2(273) ↗
32. Fatigue-life distributions of concrete for various stress levels
33. Statistical method in structural fatigue10.1061/JSDEAG.0002603 ↗
34. Strength character of porous concrete
35. Aggregate effects on pervious Portland cement concrete static modulus of elasticity10.1061/(ASCE)0899-1561(2007)19:7(561) ↗
36. Fatigue strength of steel fibre reinforced concrete in flexure10.1016/S0958-9465(02)00102-6 ↗
37. Mechanical and fatigue performance of rubber concrete10.1016/j.conbuildmat.2013.05.055 ↗
38. Study of fatigue property of porous concrete