journal article·2017-01

Guided waves for debonding identification in CFRP-reinforced concrete beams

Jiashen Li, Ye Lu, Ruiqi Guan, Wenzhong Qu

Publisher page

Abstract

Abstract Ultrasonic guided waves excited and sensed by surface-bonded piezoelectric wafers were simulated and used to quantitatively evaluate the debonding between concrete beams and carbon fibre reinforced polymer (CFRP) overlay. Eight concrete specimens reinforced by composite overlay were prepared with different bonding conditions, which were simulated by inserting different sizes of Teflon films when the overlay was cured. A continuous wavelet transform based signal processing method was implemented to filter out broad-band environmental noise in the experiments. In consideration of the inevitable discrepancies in different specimens due to concrete preparation and sensor installation, a time-reversal process was applied to individual specimens to achieve self-comparison between the originally emitted and reconstructed wave signals which were sent back to the actuator. That procedure highlighted discrepancies in specimens, caused by different debonding conditions. Debonding indices were successfully calculated to quantify the severity of debonding, showing the potential of guided waves for integrity evaluation of CFRP-reinforced concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Geophysical Methods and Applications · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Fiber-reinforced polymer composites for construction-state-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Zhao · 2013
3. State-of-the-art review on FRP strengthened steel structures10.1016/j.engstruct.2006.10.006 ↗
4. Hollaway · 2008
5. Su · 2009 · vol. 48
6. Guided Lamb waves for identification of damage in composite structures: a review10.1016/j.jsv.2006.01.020 ↗
7. Lamb waves for detecting delamination between steel bars and concrete10.1111/1467-8667.t01-1-00299 ↗
8. Application of low-profile piezoceramic transducers for health monitoring of concrete structures10.1016/j.ndteint.2008.06.007 ↗
9. Depth detection of surface-breaking cracks in concrete plates using fundamental Lamb modes10.1016/j.ndteint.2009.02.009 ↗
10. Debond detection using embedded piezoelectric elements for reinforced concrete structures-Part II: analysis and algorithm10.1177/1475921706057979 ↗
11. Longitudinal guided waves for monitoring corrosion in reinforced mortar10.1088/0957-0233/19/5/055702 ↗
12. B.N. Pavlakovic, Leaky Guided Ultrasonic Waves in NDT. PhD Thesis, Imperial College of Science, Technology, and Medicine, University of London, 1998.
13. Ultrasonic guided waves for inspection of grouted tendons and bolts10.1061/(ASCE)0899-1561(2003)15:3(212) ↗
14. A new guided wave–based technique for corrosion monitoring in reinforced concrete10.1177/1475921712462938 ↗
15. Guided waves for damage detection in rebar-reinforced concrete beams10.1016/j.conbuildmat.2013.05.016 ↗
16. Detection of delamination between steel bars and concrete using embedded piezoelectric actuators/sensors10.1007/s13349-013-0039-2 ↗
17. The sensitivity of surface guided modes to the bond quality between a concrete block and a composite plate10.1016/j.ultras.2004.01.074 ↗
18. Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays10.1007/s11803-003-0005-9 ↗
19. Reference-free NDT technique for debonding detection in CFRP-strengthened RC structures10.1061/(ASCE)0733-9445(2007)133:8(1080) ↗
20. Non-destructive ultrasonic evaluation of CFRP–concrete specimens subjected to accelerated aging conditions10.1016/j.ndteint.2010.06.008 ↗
21. Boundary element modeling for defect characterization potential in a wave guide10.1016/S0020-7683(03)00097-0 ↗
22. Guided wave propagation and spectral element method for debonding damage assessment in RC structures10.1016/j.jsv.2009.02.028 ↗
23. Simulation methods for guided wave-based structural health monitoring: a review10.1115/1.4029539 ↗
24. Quantitative evaluation of crack orientation in aluminium plates based on Lamb waves10.1088/0964-1726/16/5/047 ↗
25. Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000276 ↗
26. Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites10.1016/j.compstruct.2004.05.010 ↗
27. Debonding detection in composite sandwich structures based on guided waves10.2514/1.J051274 ↗
28. On the selection of advanced signal processing techniques for guided wave damage identification using a statistical approach10.1016/j.engstruct.2014.02.019 ↗
29. A novel damage index for damage identification using guided waves with application in laminated composites10.1088/0964-1726/23/9/095015 ↗
30. Staszewski · 2004
31. Picinbono · 1988
32. Time-frequency representations of Lamb waves10.1121/1.1357813 ↗
33. A contribution to the applicability of complex wavelet analysis of ultrasonic signals10.1016/j.ndteint.2003.12.003 ↗
34. The use of continuous wavelet transform based on the fast Fourier transform in the analysis of multi-channel electrogastrography recordings10.1007/s10916-015-0358-4 ↗
35. Time reversal of continuous-wave, steady-state signals in elastic media10.1063/1.3097811 ↗
36. Time-reversal methods in geophysics10.1063/1.3480073 ↗
37. Damage detection in composite plates by using an enhanced time reversal method10.1061/(ASCE)0893-1321(2007)20:3(141) ↗
38. Single-channel time reversal in elastic solids10.1121/1.1802676 ↗
39. Imaging nonlinear scatterers applying the time reversal mirror10.1121/1.2168413 ↗
40. Time reversal and non-linear elastic wave spectroscopy (TR NEWS) techniques10.1016/j.ijnonlinmec.2007.12.017 ↗
41. S.B. Kim, H. Sohn, Application of time-reversal guided waves to field bridge testing for baseline-free damage diagnosis, in Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems V, Proc. SPIE: San Diego, CA, USA, 2006, pp. 617706.1–617706.10.10.1117/12.659728 ↗
42. Application of time reverse modeling on ultrasonic non-destructive testing of concrete10.1016/j.apm.2010.07.035 ↗
43. Damage detection in rebar-reinforced concrete beams based on time reversal of guided waves10.1177/1475921714521268 ↗