Investigation on the formation of tobermorite in calcium silicate board and its influence factors under autoclaved curing
Source abstract
Abstract
Abstract Compared with the traditional partition board, the superior properties of calcium silicate board are attributed to the generation of tobermorite, which can be influenced by many preparation conditions. The purpose of this study is to investigate the effect of Ca/Si ratio, and some others factors on the preparation and formation of tobermorite in calcium silicate board. The results reveal that the optimal cement content is 72%, at this time, Ca/Si ratio in calcium silicate board reaches 1.22. The tobermorite will gradually fade away when Ca/Si ratio continues to increase. XRD and mercury intrusion porosimetry after compression molding demonstrate that the molding pressure has mainly no effect on the hydration production and only has improvement on the structure of specimens. Due to the transformation of hydration production, autoclaved curing time and curing temperature should be controlled in specific range of 4–8 h and 190–195 °C, respectively. Additionally, the strength tests in different preparation factors present that the synthesis conditions confirmed in this paper are very promising to be applied in calcium silicate board.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Experimental study of screw connections in CFS-calcium silicate board wall panels[J]10.1016/j.tws.2011.01.004 ↗
2. Microstructure and thermal conductivity of hydrated calcium silicate board materials[J]10.1177/1744259107079020 ↗
3. Monotonic and cyclic loading tests for cold-formed steel wall frames sheathed with calcium silicate board[J]10.1016/j.tws.2013.09.011 ↗
4. Fungus resistance of vermiculite board and comparison to calcium silicate board and gypsum wall board[J]10.1023/B:JMSC.0000040105.36529.f1 ↗
5. A novel process for synthesis of tobermorite fiber from high-alumina fly ash[J]10.1016/j.cemconcomp.2015.10.017 ↗
6. Microstructure and characterization of hydrothermal synthesis of Al-substituted tobermorite[J]10.1016/j.conbuildmat.2016.12.059 ↗
7. Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder[J]10.1023/A:1025904905176 ↗
8. The structure of the calcium silicate hydrate phases present in hardened pastes of white Portland cement/blast-furnace slag blends[J]10.1023/A:1018639232570 ↗
9. Influence of quartz particle size and ca/si ratio on strength of autoclaved calcium silicate board[J]
10. Physicochemical characterization of a hydrated calcium silicate board material[J]10.1177/1744259105053280 ↗
11. Tobermorite synthesis under hydrothermal conditions [J]10.1016/j.proeng.2016.07.394 ↗
12. Influence of inorganic admixtures on the 11 Å-tobermorite formation prepared from steel slags: XRD and FTIR analysis[J]10.1016/j.conbuildmat.2014.03.002 ↗
13. Hydrothermal preparation of tobermorite from blast furnace slag for Cs+, and Sr2+, sorption[J]10.1016/j.jhazmat.2013.12.024 ↗
14. Experimental determination of bulk modulus of 14 Å tobermorite using high pressure synchrotron X-ray diffraction[J]10.1016/j.cemconres.2011.11.004 ↗
15. Effects of mineral powders on hydration process and hydration products in normal strength concrete[J]10.1016/j.conbuildmat.2014.08.066 ↗
16. Tricalcium silicate (C3S) hydration under high pressure at ambient and high temperature (200 °C)[J]10.1016/j.cemconres.2007.09.024 ↗
17. Phase studies of pozzolanic stabilized calcium silicate hydrates at 180 & #xB0;C[J]10.1016/j.cemconres.2004.05.021 ↗
18. Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C[J]10.1111/j.1151-2916.1992.tb05609.x ↗
19. Effects and mechanism research of the crystalline state for the semi-crystalline calcium silicate[J]10.1016/j.cemconres.2015.02.020 ↗
20. Novel hydrothermal synthesis of tobermorite fibers using Ca(II)-EDTA complex precursor[J]10.1016/S0955-2219(02)00066-3 ↗
21. Synthesis of 11Å Al-substituted tobermorite from trachyte rock by hydrothermal treatment[J]10.1016/j.ceramint.2009.07.004 ↗
22. Hydrothermal synthesis of hydrogarnet and tobermorite at 175 °C from kaolinite and metakaolinite in the CaO–Al2O3 –SiO2–H2O system: a comparative study[J]10.1016/j.clay.2008.09.014 ↗
23. JC/T 564.1-2008. Fiber reinforce calcium silicate boards, part I: Non-asbestos calcium silicate boards. Building Materials Standardization Administration of China, Beijing, China.