Prediction of internal relative humidity in concrete modified with super absorbent polymers at early age
Source abstract
Abstract
Abstract Shrinkage of high-performance concrete (HPC) mixtures may ultimately lead to early-age cracking and a reduction of service life of concrete structures. Autogenous and drying shrinkage are direct consequences of the decrease of internal relative humidity (IRH) due to self-desiccation and external drying. Therefore prediction of shrinkage of HPC requires the knowledge of IRH variations. Internal curing (IC) with super absorbent polymers (SAPs) is utilized to mitigate the shrinkage of HPC. Although investigations on IRH in concrete have been conducted, the prediction model for IRH in early-age concrete internally cured with SAPs in consideration of both water-to-cement ( w / c ) ratio and critical time is still lacking. Therefore investigations on predicting the IRH in early-age concrete internally cured with SAPs were conducted in present study and results showed that: (1) a prediction model for the working w / c ratio in early-age concrete internally cured with SAPs was proposed in consideration of age, effective and IC w / c ratios of concrete; (2) a prediction model for the critical time of IRH was proposed in consideration of both effective and IC w / c ratios; (3) a prediction model for the IRH in early-age concrete internally cured with SAPs was proposed in consideration of working w / c ratio, critical time, and age. These models showed the good accuracy of the test results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste10.1016/S0008-8846(99)00021-6 ↗
2. Effect of hybrid curing on cracking potential of high-performance concrete10.1016/j.cemconres.2013.08.001 ↗
3. Experimental study of early-age bond behavior between high strength concrete and steel bars using a pull-out test10.1016/j.conbuildmat.2016.03.094 ↗
4. Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
5. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks10.1016/j.conbuildmat.2010.06.063 ↗
6. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
7. Integrative study on the effect of internal curing on autogenous and drying shrinkage of high-strength concrete10.1080/07373937.2012.745869 ↗
8. Tensile creep and cracking resistance of concrete with different water-to-cement ratios at early age10.1016/j.conbuildmat.2017.04.056 ↗
9. State-of-the-art report on control of cracking in early age concrete10.3151/jact.2.141 ↗
10. Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs10.1016/j.conbuildmat.2014.02.060 ↗
11. Relationship between tensile Young's modulus and strength of fly ash high strength concrete at early age10.1016/j.conbuildmat.2016.06.145 ↗
12. Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation10.1016/j.cemconres.2004.09.004 ↗
13. Prevention of autogenous shrinkage in high strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
14. Strength, permeability, and carbonation of high-performance concrete10.1016/S0008-8846(01)00641-X ↗
15. Internal curing with lightweight aggregate produced from biomass-derived waste10.1016/j.cemconres.2014.01.025 ↗
16. Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete10.1016/j.conbuildmat.2015.08.042 ↗
17. Modeling of water migration during internal curing with superabsorbent polymers10.1061/(ASCE)MT.1943-5533.0000448 ↗
18. Effects of fine LWA and SAP as internal water curing agents10.1007/s40069-014-0076-1 ↗
19. Effect of internal curing with super absorbent polymers on autogenous shrinkage of concrete at early age10.1016/j.conbuildmat.2015.12.115 ↗
20. Modeling the internal curing of high-strenght concrete using lightweight aggregates
21. Revisting the protected paste volume concept for internal curing of high-strength concretes10.1016/j.cemconres.2011.05.007 ↗
22. Reducing restrained shrinkage cracking in concrete: examining the behavior of self-curing concrete made using different volumes of saturated lightweight aggregate
23. Shrinkage mitigation strategies in cementitious systems: a closer look at differences in sealed and unsealed behavior10.3141/2070-08 ↗
24. Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate10.1016/j.conbuildmat.2016.12.187 ↗
25. Internal curing-constructing more robust concrete
26. Effect of internal curing with super absorbent polymers on residual stress development and stress relaxation in restrained concrete ring specimens10.1016/j.conbuildmat.2016.05.048 ↗
27. Water-entrained cement-based materials-I: principle and theoretical background10.1016/S0008-8846(01)00463-X ↗
28. Can superabsorbent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
29. Prediction of differential drying shrinkage in concrete10.1016/S0008-8846(98)00077-5 ↗
30. A practical procedure for the analysis of moisture transfer within concrete due to drying10.1680/macr.1997.49.179.129 ↗
31. Moisture diffusion of concrete considering self-desiccation at early ages10.1016/S0008-8846(99)00192-1 ↗
32. Moisture diffusion in cementitious materials adsorption isotherms10.1016/1065-7355(94)90033-7 ↗
33. Detection of Early-age Cracking Due to Restrained Autogenous Shrinkage
34. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
35. Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes10.1016/j.cemconres.2004.06.028 ↗
36. Experimental studies on shrinkage of high-performance concrete10.1016/S0008-8846(98)00068-4 ↗
37. Self-desiccation and its importance in concrete technology10.1007/BF02486354 ↗
38. Moisture in concrete subjected to different kinds of curing10.1007/BF02486397 ↗
39. Moisture profiles in drying concrete10.1680/1988.1.3.164 ↗
40. Discussion: factors influencing relative humidity in concrete10.1680/macr.1991.43.157.305 ↗
41. Chen · 2015
42. Calculation of moisture distribution in early-age concrete
43. Hygro-thermo-chemo-mechanical modelling of concrete at early ages and beyond. Part I: hydration and hygro-thermal phenomena10.1002/nme.1615 ↗
44. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete10.1617/s11527-014-0351-2 ↗
45. Prediction model for relative humidity of early-age internally cured concrete with pre-wetted lightweight aggregates10.1016/j.conbuildmat.2017.03.088 ↗
46. Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking10.1016/j.cemconres.2008.02.001 ↗
47. Modeling of internal curing in manuring mortar10.1016/j.cemconres.2011.04.013 ↗
48. Mixture proportioning for internal curing
49. ASTM. Standard specification for lightweight aggregate for internal curing of concrete. C1761/C1761M-13b, West Conshohocken, PA, 2013.
50. Protected paste volume in concrete: extension tointernal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
51. Mönnig · 2009
52. L Dudziak, V. Mechtcherine , W. Brameshuber, Enhancing early-age resistance to cracking in high-strength cement-based materials by means of internal curing using super absorbent polymers. Additions improving properties of concrete, RILEM Proceedings PRO 2010;129–39.
53. The use of superabsorbent polymers to mitigate shrinkage of concrete
54. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigation autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
55. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
56. Self-curing concrete: water retention, hydration and moisture transport10.1016/j.conbuildmat.2006.02.007 ↗
57. Effect of pre-wetted light-weight aggregate on internal relative humidity and autogenous shrinkage of concrete10.1007/BF02861491 ↗
58. Internal curing efficiency of prewetted LWFAs on concrete humidity and autogenous shrinkage development10.1061/(ASCE)MT.1943-5533.0000883 ↗
59. ASTM. Standard practice for maintaining constant relative humidity by means of aqueous solutions. E104-02, West Conshohocken, PA, 2002.
60. Effects of simulated environmental conditions on the internal relative humidity and relative moisture content distribution of exposed concrete10.1016/j.cemconcomp.2010.09.009 ↗
61. Moisture movement in early-age concrete under cement hydration and environmental drying10.1680/jmacr.15.00293 ↗
62. Effect of internal curing on durability-related properties of high performance concrete10.1016/j.cemconres.2011.07.012 ↗
63. Tensile creep and shrinkage of SAP modified concrete10.1016/j.cemconres.2014.01.014 ↗
64. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗
65. Blended cement and lightweight concrete using scoria: Mix design, strength, durability and heat insulation characteristics
66. Water permeability and chloride penetrability of high-strength lightweight aggregate concrete10.1016/S0008-8846(01)00738-4 ↗
67. On the mitigation of early age cracking
68. Internal relative humidity distribution in high-performance cement paste due to moisture diffusion and self-desiccation10.1016/j.cemconres.2005.07.006 ↗
69. Mechtcherine · 2012
70. Study on mechanism of desorption behavior of saturated superabsorbent polymers in concrete
71. Experimental observation of internal water curing of concrete10.1617/s11527-006-9132-x ↗
72. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio10.1007/s10973-013-3359-x ↗
73. Properties of high-performance concrete containing shrinkage-reducing admixtures10.1016/S0008-8846(97)00135-X ↗
74. Water consumption of the early-age paste and the determination of “time-zero” of self-desiccation shrinkage10.1016/j.cemconres.2007.08.005 ↗
75. Prediction of self-desiccation in low water-to-cement ratio pastes based on pore structure evolution10.1016/j.cemconres.2013.03.013 ↗