journal article·2017-09

Experimental investigation of the effects of aggregate size distribution on the fracture behaviour of high strength concrete

A.P.N. Siregar, M. Imran Rafiq, M. Mulheron

Publisher page

Abstract

This paper examines the influence of different aggregate size distributions on the fracture behaviour of high strength concrete. Three-point bend test was performed on 63 notched beams casted using three aggregate size distributions and two water to binder ratios. The total fracture energy, GF, and critical stress intensity factor, KIC, were used to determine the fracture characteristic of concrete. The results show that the values of GF decrease substantially with increasing coarseness of aggregate grain structure, λ. Values of KIC also decreased but demonstrated only limited dependence on λ. In contrast, reducing the total w/b ratio substantially increases the value of KIC but had no measurable effect on GF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Interpretation of aggregate volume fraction effects on fracture behaviour of concrete10.1016/j.conbuildmat.2011.08.080 ↗
2. Experimental study on the effect of aggregate content on fracture behaviour of concrete10.1016/S0013-7944(00)00036-9 ↗
3. American Concrete Institute (2010) Report on high strength concrete. ACI-363R-10. Farmington Hills, USA.
4. Statistical prediction of fracture parameters of concrete and implications for choice of testing standard10.1016/S0008-8846(01)00723-2 ↗
5. Effect of aggregate on the fracture behaviour of high strength concrete10.1016/j.conbuildmat.2004.04.013 ↗
6. Committee Euro-International du Beton · 1993
7. CommitteeEuro-International du Beton (2010) CEB-FIP Model Code 2010 (first draft) · 2010 · vol. 1
8. Effect of aggregate size on the fracture and mechanical properties of a simple concrete10.1016/j.engfracmech.2008.02.011 ↗
9. Failure mechanism of concrete: combined effect of coarse aggregate and strength level10.1016/S1065-7355(97)00014-X ↗
10. Result of three comparative test series for determining the fracture energy GF of concrete
11. Analysis of crack formation and crack growth by means of fracture mechanics and finite element10.1016/0008-8846(76)90007-7 ↗
12. Determination of fracture parameters of concrete based on the water-cement ratio
13. Fractal dimension-a measure of fracture toughness and toughness of concrete10.1016/S0013-7944(02)00019-X ↗
14. Effects of maximum aggregate size on fracture behaviour of self-compacting light weight concrete10.1016/j.conbuildmat.2016.07.061 ↗
15. Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes
16. Micromechanics of ITZ-aggregate interaction in concrete Part II: strength upscaling10.1111/jace.12606 ↗
17. Mindess · 1983
18. Influence of aggregate size on fracture process zone of concrete detected with three dimensional acoustic emission technique10.1016/0008-8846(91)90168-H ↗
19. Neville · 1990
20. Studies on ductility and evaluation of minimum flexural reinforcement in RC beams
21. RILEM TC89-FMT, Fracture mechanic of concrete test method
22. 50-FCM Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams
23. Shah · 1994
24. Shah · 1995
25. Influence of aggregate size on fracture mechanics parameters of concrete10.1016/0262-5075(87)90025-X ↗
26. Effect of coarse aggregate type on mechanical properties of high-performance concrete10.1016/S0008-8846(01)00588-9 ↗
27. Wedge splitting test on fracture behaviour of ultra high strength concrete10.1016/j.conbuildmat.2004.04.016 ↗
28. A comparative study of five approaches to evaluate double-K fracture toughness parameters of concrete and size effect analysis10.1016/j.engfracmech.2011.03.014 ↗
29. Fracture behaviour of high strength concrete at wide range of loading rates10.1016/j.ijimpeng.2009.04.007 ↗
30. Fracture properties of high strength concrete with varying silica fume content and aggregates10.1016/0008-8846(95)00043-C ↗