journal article·2018-02

Efficiency of corrosion inhibitors in mitigating corrosion of steel under elevated temperature and chloride concentration

Khaled A. Alawi Al-Sodani, Omar S. Baghabra Al-Amoudi, Mohammed Maslehuddin, Mohammed Shameem

Publisher page

Abstract

Abstract The performance of five corrosion inhibitors, with varying composition, in decreasing the rate of corrosion of mild steel immersed in the simulated concrete pore solution with three levels of chloride contamination (1000, 1500 and 2000 mg/L) and three exposure temperatures (25, 40 and 55 °C) was studied utilizing potentiodynamic polarization (PDP) technique. The morphology of the steel surfaces exposed to the aforesaid conditions was characterized using a scanning electron microscope. Uniform corrosion was noted in the specimens exposed to a temperature of up to 40 °C. However, pitting corrosion was indicated in the specimens exposed to 55 °C. An increase in the temperature or chloride concentration increased the rate of corrosion. The effect of temperature on the corrosion rate was more pronounced, particularly when it was increased from 40 to 55 °C, than the chloride concentration. Further, the use of inhibitors changed the pitting corrosion to uniform corrosion. All the investigated inhibitors were effective in minimizing in decreasing the corrosion current density, both at high temperature and high chloride concentration. However, among the five inhibitors investigated, the performance of calcium nitrite-based and amino carboxylate type inhibitors was better than that of modified amino alcohol-based inhibitors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Maslehuddin, Rasheeduzzafar, Page, C.L. Al-Mana, A.I., Influence of some parameters relevant to arabian gulf environment on reinforcement corrosion, in: Arabian Journal for Science and Engineering: Theme Issue on Corrosion and Its Prevention, April 1995, pp. 239–257.
2. Performance of concrete in a high chloride-sulfate environment
3. H. Saricimen, Al-Tayyib, A.J., Maslehuddin, M., Shamim, Concrete deterioration in high chloride-sulfate environment and repair strategies,“Special Publication, American Concrete Institute, SP-128, pp. 19-34, 1991.
4. O.S.B. Al-Amoudi, Rasheeduzzafar, M. Maslehuddin, A. Almusallam, Improving concrete durability in the Arabian Gulf, in: Proceedings of the 4th International Conference on Deterioration and Repair of Reinforced Concrete in the Arabian Gulf, 1993, pp. 929–40.
5. D. McDonald, “Corrosion of epoxy-coated steel in concrete,” Corrosion of Steel in Concrete Structures, pp. 87-110, 2016.10.1016/B978-1-78242-381-2.00005-5 ↗
6. Corrosion behavior of epoxy-coated reinforced bars in RC test specimens subjected to pre-exposure loading and wetting-drying cycles10.1016/j.conbuildmat.2016.05.066 ↗
7. Chloride-induced corrosion mechanism and rate of enamel-and epoxy-coated deformed steel bars embedded in mortar10.1016/j.cemconres.2015.12.015 ↗
8. Z. Matta, F. Giannetti, The use of calcium nitrite admixtures in the Arabian Gulf, in: Proceedings, Concrete durability in the Arabian Gulf, Bahrain Society of Engineers, 1995, pp. 157–171.
9. Ramachandran · 1996
10. Influence of organic corrosion inhibitors on pickling corrosion behaviour of sinter-forged C45 steel and 2% Cu alloyed C45 steel10.1016/j.jallcom.2016.11.133 ↗
11. Gemini surfactants as corrosion inhibitors for carbon steel10.1016/j.molliq.2017.01.047 ↗
12. Deoxyribonucleic acid as an inhibitor for chloride-induced corrosion of reinforcing steel in simulated concrete pore solutions10.1016/j.conbuildmat.2017.05.157 ↗
13. Multi-functional organic corrosion inhibitor10.1016/S0958-9465(03)00039-8 ↗
14. I. Robertson and C. Newtson, “Performance of corrosion inhibitors in concrete exposed to marine environment,” Concrete Repair, Rehabilitation and Retrofitting II-Alexander et al. (Eds) CRC Press, London, pp. 331-332, 2009.10.1201/9781439828403.ch126 ↗
15. Organic corrosion inhibitor of triethylenetetramine into chloride contamination concrete by eletro-injection method10.1016/j.conbuildmat.2016.04.076 ↗
16. The efficiency of a corrosion inhibitor on steel in a simulated concrete environment10.1016/j.matchemphys.2016.08.047 ↗
17. C. G. Zoltanetzky J.R., and J. Parnes, “New developments in corrosion inhibiting admixture systems for reinforced concrete,” In: Page CL, Treadaway KWJ, Bamforth PB, editors. Corrosion of Reinforcement in Concrete. London: Elsevier Applied Science; pp, pp. 825 – 850, 1990.
18. Effectiveness of corrosion inhibitors and their influence on the physical properties of Portland cement mortars
19. Chemistry of corrosion inhibitors10.1016/S0958-9465(03)00037-4 ↗
20. Corrosion inhibitors for reinforced concrete
21. Effectiveness of corrosion inhibitors in contaminated concrete10.1016/S0958-9465(02)00084-7 ↗
22. Inhibitor evaluation in different simulated concrete pore solution for the protection of steel rebars10.1016/j.conbuildmat.2016.07.115 ↗
23. The effect of a surface-applied corrosion inhibitor on the durability of concrete10.1016/j.conbuildmat.2012.07.007 ↗
24. Corrosion performance of steel reinforcement in simulated concrete pore solutions in the presence of imidazoline quaternary ammonium salt corrosion inhibitor10.1016/j.conbuildmat.2014.07.082 ↗
25. Corrosion inhibitors for reinforced concrete
26. B. El-Jazairi, N. Berke, and W. Grace, “The use of calcium nitrite as a corrosion inhibiting admixture to steel reinforcement in concrete. Corrosion of reinforcement in concrete. Papers presented at the third international symposium on” corrosion of reinforcement in concrete construction“, belfry hotel, wishaw, warwickshire,” Publication of: CICC Publications, pp. 21-24, May 1990.
27. Organic-based corrosion-inhibiting admixture for reinforced concrete
28. Electrochemical and analytical characterization of three corrosion inhibitors of steel in simulated concrete pore solutions10.1007/s12613-012-0512-7 ↗
29. K. A. A. Al-Sodani, “Performance evaluation of corrosion inhibitors for local conditions,” M.S. thesis, Department of Civil and Environmental Engineering, King Fahd University of Petroleum and Minerals, Dharan, Saudia Arabia, 2014.
30. ASTM G61-86, “Standard test method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, Nickel-, or Cobalt-Based Alloys,” ASTM standards, ASTM, Philadelphia, PA, USA, 2014.
31. Electrochemical polarization I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
32. M. Maslehuddin, “Corrosion of Steel in Alkeline Media,” 6th Middle East Corrosion Conference, Bahrain Society of Engineers, vol. 5, p. 597, January 1994.