journal article·2018-03

Thermal-resistant lightweight concrete with polyethylene beads as coarse aggregates

M.R. Ali, M. Maslehuddin, M. Shameem, M.S. Barry

Publisher page

Abstract

Abstract There is an increasing trend towards developing thermal insulating lightweight concrete (TI-LWC) for structural applications. This is fueled by the desire to conserve energy and decrease greenhouse gas emission. Though few studies have been conducted to develop LWC, the thrust of the reported study was to develop TI-LWC. Polyethylene beads were utilized in the development of the reported TI-LWC. Trial mixtures were prepared utilizing polyethylene beads as a total or partial replacement of limestone coarse aggregates and the prepared specimens were tested to determine their unit weight and compressive strength. Mixtures showing low unit weight and acceptable compressive strength were selected for detailed evaluation, to determine mechanical properties, thermal resistance and durability. The unit weight of the developed mixtures was in the range of 1366–1744 kg/m3 while the compressive strength was in the range of 17–27 MPa. The water absorption, depth of water penetration, and chloride ion permeability values were more than those of the normal weight concrete. However, the thermal resistance of the developed TI-LWCs, was very high indicating their usefulness in energy conservation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Bažant · 1996
2. Thermal and mechanical properties of light-weight concrete exposed to high temperature10.1002/fam.2125 ↗
3. Experimental study on flexural behaviors of all-lightweight aggregate concrete slabs
4. Experiment study on mechanical performance of shale lightweight aggregate concrete10.4028/www.scientific.net/AMR.530.80 ↗
5. Compressive strength of organic lightweight aggregate concrete
6. Properties of low-density lightweight aggregate concrete under uniaxial loading
7. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air
8. An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene10.1016/j.conbuildmat.2011.04.018 ↗
9. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete10.1016/j.conbuildmat.2010.06.020 ↗
10. Experimental study of lightweight expanded polystyrene aggregate concrete containing silica fume and polyethylene fibers10.1007/s12204-010-9550-3 ↗
11. Penetrability of lightweight aggregate concrete10.1680/macr.2010.62.3.201 ↗
12. A novel material for lightweight concrete production10.1016/j.cemconcomp.2009.05.002 ↗
13. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes10.1016/j.wasman.2008.06.014 ↗
14. Shrinkage of high-strength lightweight aggregate concrete exposed to dry environment
15. Properties of volcanic pumice based cement and lightweight concrete10.1016/j.cemconres.2003.08.004 ↗
16. High-strength lightweight concrete made with scoria aggregate containing mineral admixtures10.1016/S0008-8846(03)00131-5 ↗
17. Water permeability and chloride penetrability of high-strength lightweight aggregate concrete10.1016/S0008-8846(01)00738-4 ↗
18. A comparative embodied energy analysis of a house with recycled expanded polystyrene (EPS) based foam concrete wall panels10.1016/j.enbuild.2016.11.044 ↗
19. Structural feasibility of Expanded Polystyrene (EPS) based lightweight concrete sandwich wall panels10.1016/j.conbuildmat.2017.02.027 ↗
20. ASTM, 2002. Standard Specification for Lightweight Aggregates for Structural Concrete, ASTM , West Conshohocken, PA, USA.
21. ASTM, 2013. Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM , West Conshohocken, PA, USA.
22. ASTM, 2012. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM C 39, West Conshohocken, PA, USA.
23. ASTM, 2002. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM C 469, West Conshohocken, PA, USA.
24. ASTM, 2010. Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM C 78, West Conshohocken, PA, USA.
25. DIN 1048. Test Methods of Concrete Impermeability to Water: Part 2. Deutscher Institut Fur Normung, Germany.
26. ASTM, 2013. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM C 642, West Conshohocken, PA, USA.
27. ASTM, 2006. Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete, ASTM C 341, West Conshohocken, PA, USA.
28. ASTM, 2012. Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM C 1202, West Conshohocken, PA, USA.
29. ASTM, 2009. Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, ASTM C 876, West Conshohocken, PA, USA.
30. A theoretical analysis of the slope of the polarization curves10.1149/1.2428496 ↗
31. ASTM, 2013. Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus, ASTM C 177, West Conshohocken, PA, USA.
32. Mathematical model for complete stress-strain curve prediction of normal, lightweight and high strength concretes10.1680/macr.2004.56.1.23 ↗
33. Characteristics of lightweight concrete containing mineral admixtures10.1016/j.conbuildmat.2010.07.025 ↗
34. M. Al-Mehthel, A.S. Al-Utaibi, M. Maslehuddin, M.R. Ali, Utilization of Heavy Oil ash to Produce High Quality Concrete, US Patent US 8945300 B2.
35. Effect of electric arc furnace dust on the properties of OPC and blended cement concretes10.1016/j.conbuildmat.2010.06.024 ↗
36. The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete10.1016/j.cemconres.2003.09.018 ↗