Preparation and performance of the modified high-strength/high-modulus polyvinyl alcohol fiber/polyurethane grouting materials
Source abstract
Abstract
Abstract In this study, modified polyvinyl alcohol fiber (MPVA) filled polyurethane (MPVA/PU) grouting materials with high interfacial bonding strength were prepared. Firstly, the high-strength/high-modulus PVA fibers were modified by γ-aminopropyl triethoxysilane (APTES) and diphenyl-methane-diisocyanate (MDI) respectively. The chemical structure, surface morphology and hydrophilicity were characterized by FT-IR, XPS, SEM and contact angle analysis. Second, the performance of PU mixed with different dosages of modified PVA fibers as the grouting material was studied. The results showed that mechanical properties and hot air aging resistance of the MPVA/PU composite were significantly increased compared with pure PU. In particular, it also can be found that modified PVA fiber bring better interface adhesion, especially, when the dosage is 0.1%, the best overall performance of MPVA/PU can be achieved. SEM analysis demonstrated that the interface adhesion between modified PVA fiber and PU was obviously improved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. On the viscous behavior of cement mixtures with clay, sand, lime and bottom ash for jet grouting10.1016/j.conbuildmat.2015.05.072 ↗
2. Flexible and stretchable polyurethane/waterglass grouting material10.1016/j.conbuildmat.2017.01.113 ↗
3. Effect of glass powder added grout for deep mixing of marginal sand with clay
4. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/j.colsurfa.2005.01.016 ↗
5. Silica sol for rock grouting: Laboratory testing of strength, fracture behaviour and hydraulic conductivity10.1016/j.tust.2009.04.003 ↗
6. Supramolecular cross-links in poly(alkyl methacrylate) copolymers and their impact on the mechanical and reversible adhesive properties10.1021/acsami.5b01939 ↗
7. Effect of different superplasticisers on the physical and mechanical properties of cement grouts10.1016/j.conbuildmat.2013.09.050 ↗
8. Effect of silane treatment on the mechanical properties of polyurethane/water glass grouting materials10.1016/j.conbuildmat.2016.04.112 ↗
9. Characterisation of mechanical and thermal properties of epoxy grouts for composite repair of steel pipelines10.1016/j.matdes.2013.05.068 ↗
10. Influence of the epoxy structure on the physical properties of epoxy resin nanocomposites10.1021/ie048835w ↗
11. Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes10.1016/j.conbuildmat.2011.10.055 ↗
12. Development of water-soluble polyurethane grout
13. Study on structure and performance of reactive silicate reinforced polyurethane composite10.1002/pen.24119 ↗
14. A novel surface modification of carbon fiber for high-performance thermoplastic polyurethane composites10.1016/j.apsusc.2016.04.118 ↗
15. Refractive index engineering of transparent ZrO2-polydimethylsiloxane nanocomposites10.1039/b715338d ↗
16. Surface functionalized zinc oxide (ZnO) nanoparticle filled organic-inorganic hybrid materials with enhanced thermo-mechanical properties10.1016/j.porgcoat.2015.05.022 ↗
17. A novel polymeric flame retardant and exfoliated clay nanocomposites: Preparation and properties10.1016/j.cej.2011.12.095 ↗
18. Damping, thermal, and mechanical properties of montmorillonite modified castor oil-based polyurethane/epoxy graft IPN composites10.1016/j.matchemphys.2011.07.044 ↗
19. Hard and transparent hybrid polyurethane coatings using in situ incorporation of calcium carbonate nanoparticles10.1016/j.matchemphys.2011.04.066 ↗
20. Reinforcement of polyurethane composites with an organically modified montmorillonite10.1016/j.compositesa.2006.01.014 ↗
21. Preparation, characterization, and properties of silicate/polyurethaneurea composites based on dipropylene glycol dibenzoate
22. One-step synthesis of functional silica nanoparticles for reinforcement of polyurethane coatings10.1016/j.powtec.2011.11.023 ↗
23. Preparation of scratch and abrasion resistant polymeric nanocomposites by monomer grafting onto nanoparticles10.1002/macp.200400156 ↗
24. The surface modification of TiN nano-particles using macromolecular coupling agents, and their resulting dispersibility10.1016/j.apsusc.2013.12.098 ↗
25. Comparative study between natural and PVA fibers to reduce plastic shrinkage cracking in cement-based composite10.1016/j.conbuildmat.2015.05.028 ↗
26. Strengthening of brick masonry with PVA fiber reinforced cement stucco10.1016/j.conbuildmat.2014.12.093 ↗
27. Strain hardening behavior of lightweight hybrid polyvinyl alcohol (PVA) fiber reinforced cement composites10.1617/s11527-010-9691-8 ↗
28. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
29. Effect of silica fume and PVA fiber on the abrasion resistance and volume stability of concrete10.1016/j.compositesb.2017.07.058 ↗
30. The effect of solvent on isocyanate group content determination in polyurethane prepolymer
31. Crosslinked PVA nanofibers reinforced with cellulose nanocrystals: water interactions and thermo mechanical properties10.1002/app.40334 ↗
32. Synthesis and properties of nanosilica-reinforced polyurethane for grouting10.1002/app.23306 ↗
33. Fourier Transform infrared thermal analysis of a segmented polyurethane10.1021/ma60073a021 ↗
34. Surface zwitterionically functionalized PVA-co-PE nanofiber materials by click chemistry10.1039/c3ra41505h ↗
35. Nanoasperity: structure origin of nacre-inspired nanocomposites10.1021/acsnano.5b00119 ↗
36. Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine codeposition for the improved interfacial adhesion10.1016/j.compscitech.2017.08.008 ↗
37. Preparation and characterization of Si3N4/SBR nanocomposites with high performance10.1016/j.matdes.2011.05.002 ↗