Structural behavior of RC beams containing EAF slag as recycled aggregate: Numerical versus experimental results
Source abstract
Abstract
Abstract In the context of recycled concrete, the use of electric arc furnace (EAF) slag as partial or full replacement of coarse natural aggregates is particularly appealing because of the resulting economic and sustainability implications. Experimental investigation has been carried out on a set of reinforced concrete (RC) beams containing EAF slag as recycled aggregates under four-point bending tests. It has been found that the presence of steel slags leads to a higher flexural and shear capacity than the corresponding traditional RC beams, crack widths are reduced and the overall ductility is increased. Following these experimental findings, a numerical investigation is carried out. In particular, two different three-dimensional finite element procedures are adopted for comparative purposes against the experimental findings. The first procedure is a step-by-step incremental method based on a plasticity model for steel and a nonlinear stress-strain law for concrete in compression, while the post-failure behavior in tension is governed by a smeared-crack model. The second procedure is based on the limit analysis theory and permits one to simulate the limit state solution by carrying out simple elastic analyses in an iterative fashion. Comparison between numerical and experimental results is discussed and the main advantages and drawbacks of the two proposed numerical procedures are outlined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Electric arc furnace slag in concrete10.1061/(ASCE)0899-1561(2004)16:6(639) ↗
2. Mechanical and durability characteristics of concrete containing EAF slag as aggregate10.1016/j.cemconcomp.2009.05.006 ↗
3. Concrete with EAF steel slag as aggregate: A comprehensive technical and environmental characterisation10.1016/j.compositesb.2015.12.022 ↗
4. Electric arc furnace slag and its use in hydraulic concrete10.1016/j.conbuildmat.2015.05.003 ↗
5. Self-compacting concrete incorporating electric arc furnace steelmaking slag as aggregate10.1016/j.matdes.2016.11.048 ↗
6. EUROSLAG. The European Slag Association. Position Paper on the Status of Ferrous Slag. 2013.
7. Bond between steel reinforcement bars and Electric Arc Furnace slag concrete10.1617/s11527-017-1038-2 ↗
8. Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region10.1016/j.conbuildmat.2012.02.012 ↗
9. Production of high-strength concrete using high volume of industrial by-products10.1016/j.conbuildmat.2010.01.016 ↗
10. Use of low CaO unprocessed steel slag in concrete as fine aggregate10.1016/j.conbuildmat.2008.06.003 ↗
11. Properties of concretes with black/oxidizing electric arc furnace slag aggregate10.1016/j.cemconcomp.2012.09.001 ↗
12. Durability of concrete made with EAF slag as aggregate10.1016/j.cemconcomp.2006.02.008 ↗
13. High performance concrete with electric arc furnace slag as aggregate: mechanical and durability properties10.1016/j.conbuildmat.2015.10.022 ↗
14. Concretes made of EAF slag and AOD slag aggregates from stainless steel process: mechanical properties and durability10.1016/j.conbuildmat.2014.12.007 ↗
15. Structural performance of spirally confined concrete with EAF oxidising slag aggregate10.1080/19648189.2013.810178 ↗
16. Experimental behavior of reinforced concrete beams with electric arc furnace slag as recycled aggregate
17. Experimental behavior of beam-column joints made with EAF concrete under cyclic loading10.1016/j.engstruct.2017.02.038 ↗
18. Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete10.1016/j.engstruct.2017.09.022 ↗
19. 2015
20. 2014
21. 2009
22. Collapse load of composite laminates: Lower bound evaluation by stress field analytical approximation10.1016/j.compositesb.2015.01.041 ↗
23. Failure modes prediction of multi-pin joints FRP laminates by limit analysis10.1016/j.compositesb.2012.09.071 ↗
24. Peak load prediction of multi-pin joints FRP laminates by limit analysis10.1016/j.compstruct.2012.09.038 ↗
25. A. Santamaria, F. Faleschini, I. Vegas, J.T. San-José, C. Pellegrino, J.J. González, A comparison between European electric arc furnace slags. 9th European Slag Conference, 11-13 October 2017, Metz, France.
26. Reinforced concrete structure: Non destructive in situ strength assessment of concrete10.1016/j.conbuildmat.2014.11.023 ↗
27. ADINA R & D, Inc. Theory and modeling guide volume I: ADINA. Report ARD 11-8. Watertown (MA, USA); 2011.
28. A triaxial failure criterion for concrete and its generalization
29. An efficient three-dimensional solid finite element dynamic analysis of reinforced concrete structures10.1002/eqe.510 ↗
30. Modelling of crack closure for finite-element analysis of structural concrete10.1016/S0045-7949(98)00107-2 ↗
31. On structural concrete and the theorems of limit analysis
32. Plastic analysis of shear concrete
33. Chen · 1982
34. Nielsen · 2011
35. RC beams strengthened with composite material: a limit analysis approach and experimental study10.1016/S0263-8223(02)00286-6 ↗
36. RC two-way slabs strengthened with CFRP strips: experimental study and a limit analysis approach10.1016/S0263-8223(03)00011-4 ↗
37. Limit analysis of plates and slabs using a meshless equilibrium formulation10.1002/nme.2887 ↗
38. Yield design of reinforced concrete slabs using a numerical equilibrium formulation
39. A curvature smoothing Hsieh–Clough–Tocher element for yield design of reinforced concrete slabs10.1016/j.compstruc.2015.02.009 ↗
40. Numerical limit analysis of steel-reinforced concrete walls and slabs10.1016/j.compstruc.2015.08.004 ↗
41. Limit state evaluation of steel-reinforced concrete elements by von Mises and Menétrey-Willam-type yield criteria10.1142/S1758825114500586 ↗
42. Limit analysis of 3D reinforced concrete beam elements
43. Limit state analysis of reinforced concrete plates subjected to in-plane forces10.1016/S0020-7683(99)00254-1 ↗
44. Chen · 1988
45. Théorèmes limites pour un materiau de Coulomb à dilatation non standardisée
46. Lubliner · 1990
47. A kinematic approach for peak load evaluation of concrete elements10.1016/j.compstruc.2012.12.030 ↗
48. A FE-based limit analysis approach for concrete elements reinforced with FRP bars10.1016/j.compstruct.2013.08.039 ↗
49. Peak loads and failure modes of steel-reinforced concrete beams: predictions by limit analysis10.1016/j.engstruct.2013.05.030 ↗
50. Strengthening of steel-reinforced concrete structural elements by externally bonded FRP sheets and evaluation of their load carrying capacity10.1016/j.compstruct.2014.07.040 ↗
51. Limit analysis on FRP-strengthened RC members10.3221/IGF-ESIS.29.18 ↗
52. A C2 plasticity model for structural concrete10.1016/j.compstruc.2008.10.009 ↗
53. Limit state solutions, based upon linear elastic solutions with spatially varying elastic modulus10.1016/S0045-7825(96)01104-8 ↗
54. A method of estimating limit loads by iterative elastic analysis. Parts I, II, III
55. Elastic modulus reduction method for limit analysis of thin plate and shell structures10.1016/j.tws.2009.12.004 ↗
56. RC members strengthened with externally bonded FRP plates: A FE-based limit analysis approach10.1016/j.compositesb.2014.11.013 ↗
57. Faleschini · 2011
58. Kotsovos · 1995
59. A 3D hypoplastic model for cyclic analysis of concrete structures10.1016/S0141-0296(00)00048-1 ↗