Rapid-hardening controlled low strength materials made of recycled fine aggregate from construction and demolition waste
Source abstract
Abstract
Abstract Rapid-hardening controlled low strength material (CLSM) containing recycled fine aggregate from construction and demolition (C&D) waste was prepared with the sprayed concrete accelerator. Eleven mixtures were made with different accelerator-to-binder (A/B), water-to-solid (W/S) and binder-to-recycled fine aggregate (B/R) ratios. The workability (flowability and bleeding rate) of fresh mixture and the mechanical properties (early strength, long-term strength and dynamic elastic modulus) of hardened material were tested. The results show that adding (20 ∼ 50%) accelerator reduces the bleeding rate of CLSM by 48.8 ∼ 84.6%, with no significant effect on the flowability. Improved flowability of CLSM can be achieved by increasing the W/S or B/R ratio, with increased or reduced bleeding rate, respectively. The optimal A/B ratio for best early strength development is 40%, with the early hour strength (2 ∼ 4 h) up to 0.41 ∼ 0.79 MPa. When A/B ratio is held constant, the early strength of CLSM is affected by the amount of cementitious materials and the actual content of free water. An accurate predictive model for the long-term strength of CLSM was established through regression analysis, in which three control parameters are considered. A power function relationship between the compressive strength and the dynamic elastic modulus is also established. Dynamic elastic modulus can thus serve as an indicator for evaluation of the mechanical properties of CLSM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Innovations in Concrete and Construction Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Characterizing the generation and flows of construction and demolition waste in China10.1016/j.conbuildmat.2017.01.055 ↗
2. Performance evaluation of recycled asphalt mixtures by construction and demolition waste materials10.1016/j.conbuildmat.2016.05.117 ↗
3. Joint use of construction waste (CW) and sugarcane bagasse ash sand (SBAS) in concrete10.1016/j.conbuildmat.2016.03.062 ↗
4. Prediction of compressive strength of concrete containing construction and demolition waste using artificial neural networks10.1016/j.conbuildmat.2012.09.026 ↗
5. Effects of recycled aggregates from construction and demolition wastes on mechanical and permeability properties of paving stone, kerb and concrete pipes10.1016/j.conbuildmat.2016.01.030 ↗
6. Investigation of asphalt mixture containing demolition waste obtained from earthquake-damaged buildings10.1016/j.conbuildmat.2011.09.023 ↗
7. Construction and demolition waste parameters for rational pavement design10.1016/j.conbuildmat.2018.02.086 ↗
8. Alternative cements based on alkali-activated red clay brick waste10.1016/j.conbuildmat.2016.10.023 ↗
9. Recycling of construction and demolition waste for producing new construction material (Brazil case-study)10.1016/j.conbuildmat.2016.07.044 ↗
10. Study on the production of thermal insulation block using construction waste as aggregate
11. ACI-229R, Controlled Low Strength Materials (Reproved 2005), Farmington Hills (MI), 2005.
12. Feasibility study of a soil-based rubberized CLSM10.1016/j.wasman.2008.06.017 ↗
13. Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement10.1016/j.conbuildmat.2013.07.046 ↗
14. Beneficial reuse of construction surplus clay in CLSM
15. Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust10.1016/j.matdes.2011.07.014 ↗
16. Performance of industrial by-products in controlled low-strength materials (CLSM)10.1016/j.wasman.2007.03.030 ↗
17. Characterization of controlled low-strength material obtained from dewatered sludge and refuse incineration bottom ash: mechanical and microstructural perspectives10.1016/j.jenvman.2013.07.008 ↗
18. Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag10.1016/j.conbuildmat.2013.12.049 ↗
19. Characteristics of controlled low-strength materials incorporating cement kiln dust10.1139/l06-136 ↗
20. Preparation and properties of rapid hardening flowable backfill material containing construction waste
21. Use of rapid-hardening cement for controlled low-strength materials for pavement applications10.3141/2363-09 ↗
22. New subgrade replacement materials for segregated frozen ground area and their properties
23. Use of recycled fine aggregates for Control Low Strength Materials (CLSMs) production10.1016/j.conbuildmat.2013.02.059 ↗
24. On-site sorting of construction and demolition waste in Hong Kong10.1016/S0921-3449(01)00052-0 ↗
25. Franklin Associates, Ltd., Characterization of Building-Related Construction and Demolition Debris in the United States, The U.S. Environmental Protection Agency, 1998.
26. Recycled Fine Aggregate for Concrete and Mortar, GB/T 25176-2010, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, P.R. China, 2010
27. Standard Specification for Concrete Aggregates, ASTM C33/C33M-13, American Society for Testing and Materials, Conshohocken, PA, USA, 2013.
28. Common Portland Cement, GB 175-2007, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, P.R. China, 2007.
29. Fly Ash Used for Cement and Concrete, GB/T 1596-2005, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, P.R. China, 2005
30. Standard Test Method for Bleeding of Concrete, ASTM C232/C232M-14, American Society for Testing and Materials, Conshohocken, PA, USA, 2014.
31. Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM), ASTM D6103-04, American Society for Testing and Materials, Conshohocken, PA, USA, 2004.
32. Standard for Test Method of Performance on Building Mortar, JGJ/T 70-2009, Ministry of Construction of the People’s Republic of China, Beijing, P.R. China, 2009.
33. Standard for Test Methods of Long-Term Performance and Durability of Ordinary Concrete, GB/T 50082-2009, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing, P.R. China, 2009.
34. Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction10.1016/j.conbuildmat.2014.04.087 ↗
35. Performance of mortar containing portland cement and rapid hardening sulphoaluminate cement
36. Potential of scrap tire rubber as lightweight aggregate in CLSM10.1016/S0956-053X(02)00160-5 ↗
37. Strength degradation model and durability service life prediction of concrete in freezing-thawing circumstance
38. The study on relative dynamic modulus of elasticity and microstructure of concrete
39. Study on relation between dynamic micdulus of elasticity and velocity of ultrasonic sounded compressive strength for concrete
40. Influence of different deterioration effects on mechanical properties of concrete