journal article·2018-06

Concrete resistant to spalling made with recycled aggregate from sanitary ceramic wastes – The effect of moisture and porosity on destructive processes occurring in fire conditions

Bartosz Zegardło, Maciej Szeląg, Paweł Ogrodnik

Publisher page

Abstract

Abstract The paper describes a new model of the production of the concrete that is resistant to the conditions of a sudden temperature rise, which simulate a fire. Aluminum cement and aggregate obtained from the sanitary ceramic ware wastes were used for the production of the concrete. The composite was modified by the addition of the polypropylene fibers or by introducing additional porosity into the material. The purpose of the work was to produce a concrete, which would have optimal strength parameters despite the impact of a high temperature equal to 1000 °C. The paper presents the results of the research on the physical properties of the cementitious composites, as well as compressive strength before and after thermal loading. In addition, the microstructure of the heated concretes in various moisture states was investigated using a scanning electron microscope (SEM). On this basis, conclusions were drawn regarding the influence of destructive physical changes within the cement paste on the strength properties of the concretes; the beneficial characteristics of the ceramic aggregate in the aspect of the water vapor diffusion were pointed. In addition, the process of the cracks’ propagation in the structure of the cement matrix due to thermal load, and the diffusion of water vapor by the structure of the ceramic aggregate has been schematically modeled in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Composite behavior of concrete materials under high temperatures10.1016/j.ijsolstr.2015.03.016 ↗
2. Mechanical behaviour of ultra-high strength concrete at elevated temperatures and fire resistance of ultra-high strength concrete filled steel tubes10.1016/j.matdes.2016.05.050 ↗
3. Development of bond strength model for CFRP-to-concrete joints at high temperatures10.1016/j.compositesb.2016.03.088 ↗
4. Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders
5. Determination of the softening curve and fracture toughness of high-strength concrete exposed to high temperature10.1016/j.engfracmech.2015.10.023 ↗
6. Analysis of the development of cluster cracks caused by elevated temperatures in cement paste10.1016/j.conbuildmat.2015.03.044 ↗
7. Mechano-physical properties and microstructure of carbon nanotube reinforced cement paste after thermal load10.3390/nano7090267 ↗
8. Szeląg · 2017
9. V. Abyzov, A. Radionov, Lightweight Refractory Concrete Based on Aluminum-Magnesium-Phosphate Binder, in: 2nd International Conference on Industrial Engineering (Icie-2016) 150 (2016) 1440-1445.10.1016/j.proeng.2016.07.077 ↗
10. Factors governing the shear response of prestressed concrete hollowcore slabs under fire conditions10.1016/j.firesaf.2017.01.003 ↗
11. Bieda · 1981
12. Odpady ceramiki sanitarnej jako kruszywo do betonu
13. Wstępna analiza możliwości zastosowania odpadów ceramiki sanitarnej jako kruszywa do betonów pracujących w wysokich temperaturach
14. Comparison between high strength concrete and normal strength concrete subjected to high temperature10.1007/BF02485969 ↗
15. Qiang · 2010
16. Baiant · 1997 · 155
17. Harmathy · 1965 · 74
18. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
19. I. Shinsuke, Explosion preventive structure of high-strength concrete method.
20. Fiber mortar composites under fire conditions – Effects of aging and moisture-content of specimens10.1007/BF02473214 ↗
21. Explosive spalling of concrete columns with steel and polypropylene fibres subjected to severe fire10.1260/2040-2317.3.1.95 ↗
22. Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire10.1016/S0958-9465(03)00085-4 ↗
23. Experimental study on fire resistance of ultra-high strength concrete with design strength of 150 N/mm2 mixed with polypropylene fiber
24. M. Szeląg, Wpływ włókien polipropylenowych na wybrane cechy modyfikowanych zaczynów cementowych w warunkach szoku termicznego, Współczesne problemy budownictwa - teoria i praktyka, Wydawnictwo Wydziału Zarządzania Politechniki Częstochowskiej, Częstochowa, 2015, pp. 133–142.
25. The use of coarse and fine crushed bricks as aggregate in concrete10.1016/j.conbuildmat.2006.12.013 ↗
26. Use of crushed brick as coarse aggregate in concrete
27. Recycling of demolished masonry rubble as coarse aggregate in concrete: review10.1061/(ASCE)0899-1561(2004)16:4(331) ↗
28. Properties of concrete using crushed clinker brick as coarse aggregate
29. Properties of concrete incorporating fine recycled aggregate10.1016/j.cemconres.2004.06.017 ↗
30. Durability of recycled aggregates concrete: a safe way to sustainable development10.1016/j.cemconres.2004.02.009 ↗
31. Crushed bricks as coarse aggregate for concrete
32. Performance of overburnt distorted bricks as aggregates in pavement works10.1061/(ASCE)0899-1561(2006)18:6(777) ↗
33. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
34. Paving blocks made with recycled concrete aggregate and crushed clay brick10.1016/j.conbuildmat.2005.01.044 ↗
35. Properties of higher strength concrete made with crushed brick as coarse aggregate
36. Eco-efficient concretes: The effects of using recycled ceramic material from sanitary installations on the mechanical properties of concrete10.1016/j.wasman.2008.06.018 ↗
37. Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate10.1016/j.conbuildmat.2011.12.075 ↗
38. Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes10.1016/j.cemconcomp.2011.08.015 ↗
39. Eco-efficient concretes: Impact of the use of white ceramic powder on the mechanical properties of concrete10.1016/j.biosystemseng.2007.01.004 ↗
40. Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste10.1016/j.conbuildmat.2012.11.112 ↗
41. Using ceramic sanitary ware waste as concrete aggregate10.1016/j.conbuildmat.2013.06.063 ↗
42. Ultra-high strength concrete made with recycled aggregate from sanitary ceramic wastes – The method of production and the interfacial transition zone10.1016/j.conbuildmat.2016.06.112 ↗
43. The use of heat-resistant concrete made with ceramic sanitary ware waste for a thermal energy storage
44. W. Kurdowski, Chemia cementu i betonu, Wydawnictwo Polski Cement, Wydawnictwo Naukowe PWN, Kraków, 2010.
45. Z. Jamroży, Beton i jego technologie, Wydawnictwo Naukowe PWN, Warszawa, 2008.
46. EN 933-1:2012 Test of geometrical properties of aggregates. Part 1: Determination of particle size distribution – sieving method.
47. EN 1097-6:2011 Tests for mechanical and physical properties of aggregate. Part 6: Determination of particle density and water absorption.
48. EN 1097-7:2001 Tests for mechanical and physical properties of aggregate. Part 7: Determination of particle density of filler - Pyknometer method.
49. EN 12620:2002 Aggregate for concrete.
50. PN-B-06714-40:1978 Mineral aggregates. Testing. Determination of crushing strength.
51. Neville · 2000
52. EN 12350-2:2011 Testing of fresh concrete. Slump test.
53. EN 12390-7. Testing hardened concrete - Part 7: Density of hardened concrete.
54. EN 12390-8. Testing hardened concrete. Part 8: Depth of penetration of water under pressure, 2011.
55. EN 1991-1-2, Eurocode 1: Actions on structures - Part 1-2: General actions – Actions on structures exposed to fire, 2002.
56. EN 12390-3. Testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens.
57. The effects of air entrainment and pozzolans on frost resistance of 50–60 MPa grade concrete10.1016/j.conbuildmat.2006.02.002 ↗
58. Predicting frost resistance of concrete with different coarse aggregate concentration by porosity parameters
59. Freezing and thawing resistance of air-entrained concrete incorporating recycled coarse aggregate: The role of air content in demolished concrete10.1016/j.cemconres.2003.09.014 ↗
60. Influence of interfacial transition zone on engineering properties of the concrete manufactured with recycled ceramic aggregate10.3846/13923730.2013.802727 ↗