Physico-mechanical and thermal properties of composite mortars containing lightweight aggregates of expanded polyvinyl chloride
Source abstract
Abstract
Abstract Expanded polyvinyl chloride (PVC) or “FOREX” is widely used in advertising and signage boards, shop fittings and shop window decorations. This article attempts to study the physico-mechanical and thermal properties of lightweight composite mortars based on expanded polyvinyl chloride (LMEPVC), in which the natural sand are replaced by lightweight aggregates from expanded PVC sheets, with different volume proportions (0, 15, 25, 50 and 75%v). The consistency, density, porosity accessible to water, mechanical strengths (compressive and flexural tests), ultrasonic pulse velocity (UPV), dynamic modulus of elasticity (Ed), and thermal conductivity are measured on various LMEPVC samples. Scanning electron microscopy (SEM) for microstructural analysis is performed to elucidate the mechanism of strength development. The results obtained showed that reduce the specific weight of the LMEPVC composites and improve their thermal insulation, particularly the composite LMEPVC75 (λ = 0.760 W/m.K). On the other hand, the dynamic modulus of elasticity (Ed) of that same composite was found to decrease by about 66% as compared to that of the reference mortar.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Physico-mechanical properties of aerated cement composites containing shredded rubber waste10.1016/j.cemconcomp.2006.05.006 ↗
2. Effect of incorporating PVC waste as aggregate on the physical, mechanical, and chloride ion penetration behavior of concrete10.1080/01694243.2014.1000773 ↗
3. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes10.1016/j.wasman.2008.06.014 ↗
4. Effect of addition of PET on the mechanical performance of PET-mortar composite materials
5. On the mechanical properties of concrete containing waste PET particles10.1016/j.conbuildmat.2013.06.041 ↗
6. Recycling of waste PET granules as aggregate in alkali-activated blast furnace slag/metakaolin blends10.1016/j.conbuildmat.2014.02.011 ↗
7. Preliminary analysis of concrete reinforced with waste bottles PET fibers10.1016/j.conbuildmat.2010.11.066 ↗
8. Experimental study on thermo-mechanical properties of polymer modified mortar10.1016/j.matdes.2013.05.055 ↗
9. Investigations for properties improvement of recycled PE polymer particles-reinforced mortars for repair practice10.1016/j.conbuildmat.2017.04.110 ↗
10. Proportioning and characterization of lightweight concrete mixtures made with rigid polyurethane foam wastes10.1016/j.cemconcomp.2008.06.007 ↗
11. Ceramic waste influence on dune sand mortar performance10.1016/j.conbuildmat.2016.08.083 ↗
12. Valorisation of waste expanded polystyrene in concrete using a novel recycling technique10.1080/19648189.2016.1170729 ↗
13. Properties of concrete containing waste expanded polystyrene and natural resin10.1016/j.conbuildmat.2015.12.177 ↗
14. Characterization of lightweight mortars containing wood processing by-products waste10.1016/j.conbuildmat.2016.07.011 ↗
15. Performance of dry cast concrete blocks containing waste glass powder or polyethylene aggregates10.1016/j.cemconcomp.2011.05.004 ↗
16. Reuse of ground waste glass as aggregate for mortars10.1016/j.wasman.2004.12.009 ↗
17. Cork waste in cement based materials10.1016/j.matdes.2015.06.082 ↗
18. Cork-based mortars for thermal bridges correction in a dwelling: thermal performance and cost evaluation10.1016/j.enbuild.2013.12.022 ↗
19. Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2016.11.101 ↗
20. Feasibility study of lightweight cement composite containing flax by-product particles: Physico-mechanical properties10.1016/j.cemconcomp.2008.06.002 ↗
21. Eco-friendly insulation material production with waste olive seeds, ground PVC and wood chips10.1016/j.jobe.2016.01.008 ↗
22. Use of raw rice husk as natural aggregate in a lightweight insulating concrete: An innovative application10.1016/j.conbuildmat.2014.07.025 ↗
23. Polymer modified jute fiber as reinforcing agent controlling the physical and mechanical characteristics of cement mortar10.1016/j.conbuildmat.2013.08.025 ↗
24. Thermomechanical characterization of a bio-composite building material: Mortar reinforced with date palm fibers mesh10.1016/j.conbuildmat.2016.12.217 ↗
25. Thermal and mechanical performance of oil palm fiber reinforced mortar utilizing palm oil fly ash as a complementary binder10.1016/j.conbuildmat.2016.09.034 ↗
26. Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles10.1016/j.conbuildmat.2009.02.036 ↗
27. Physical and mechanical properties of mortar containing PET and PC waste aggregate10.1016/j.wasman.2010.03.028 ↗
28. Mechanical properties and abrasion behavior of concrete containing shredded PET bottle waste as a partial substitution of natural aggregate10.1016/j.conbuildmat.2013.11.049 ↗
29. Characterization of an environment friendly lightweight concrete containing ethyl vinyl acetate waste10.1016/j.matdes.2016.02.037 ↗
30. The physico-thermal properties of mortars made of composite aggregates “PET- siliceous sand”
31. Properties of lightweight aggregate concrete prepared with PVC granules derived from scraped PVC pipes10.1016/j.wasman.2008.06.014 ↗
32. A novel material for lightweight concrete production10.1016/j.cemconcomp.2009.05.002 ↗
33. Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concrete10.1016/j.conbuildmat.2009.11.010 ↗
34. Influence of content and particle size of PET waste bottles on concrete behaviour at different w/c ratios10.1016/j.wasman.2009.05.007 ↗
35. Valorization of post-consumer waste plastic in cementitious concrete composites10.1016/j.wasman.2006.03.012 ↗
36. An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete10.1016/j.wasman.2009.09.033 ↗
37. Destructive and non-destructive tests of PET-mortar composites: characterization by TG/dTG analysis
38. The effect of using polyethylene terephthalate particles on physical and strength-related properties of concrete; a laboratory evaluation10.1016/j.conbuildmat.2016.01.056 ↗
39. Enhancing concrete strength and thermal insulation using thermoset plastic waste10.1080/00914030701551089 ↗
40. Mechanical and durability properties of waste rubber fiber concrete with and without silica fume10.1016/j.jclepro.2015.07.081 ↗
41. Fiche technique pour FOREX®classic. ALCAN COMPOSITES, Alcan Airex AG, Speciality Foams, CH-5643 Sins, Suisse. www.displayeu@alcan.com.
42. NF EN 934-2, Adjuvants pour béton, mortier et coulis – Partie 2: adjuvants pour béton – Définitions, exigences, conformité, marquage et étiquetage, 2002.
43. EN 196-1 · 2005
44. ASTM C 1437-01, Standard Test Method for Flow of Hydraulic Cement Mortar, Annual Book of ASTM Standards, 2001.
45. NF EN 18-459, Béton – Essai Pour Béton Durci – Essai de Porosité et de Masse volumique, Mars 2010.
46. ASTM C597-02, Standard test method for pulse velocity through concrete. Annual Book of ASTM standards, 04.02, 2002.
47. Experimental investigation of some fresh and hardened properties of rubberized self-compacting concrete10.1016/j.matdes.2008.12.011 ↗
48. ISO 8302, Thermal Insulation: Determination of Steady-state Thermal Resistance and Related Properties – Guarded Hot Plate Apparatus, 1991.
49. M. Kismi, P. Mounanga, Comparison of short and long-term performances of lightweight aggregate mortars made with polyurethane foam waste and expanded polystyrene beads, MATEC Web of Conferences, 2012.10.1007/s10765-012-1244-7 ↗
50. Investigation on the use of foamed plastic waste as natural aggregates replacement in lightweight mortar10.1016/j.compositesb.2016.05.058 ↗
51. The combined effects of waste Polyethylene Terephthalate (PET) particles and pozzolanic materials on the properties of self-compacting concrete10.1016/j.jclepro.2015.09.107 ↗
52. Production of recycled plastic aggregates and its utilization in concrete10.1061/(ASCE)MT.1943-5533.0001765 ↗
53. A full factorial-based desirability function approach to investigate optimal mixture ratio of polymer concrete
54. Use of recycled plastics in concrete: a critical review10.1016/j.wasman.2016.03.005 ↗
55. IS 13311-1:1992, Method of Non-destructive Testing of Concrete – Methods of Test, Part 1: Ultrasonic Pulse Velocity [CED 2: Cement and Concrete], Indian Standard, (Reaffirmed 2004).
56. The chemical, mechanical and thermal properties of PET-mortar composites containing waste PET10.30638/eemj.2017.162 ↗
57. A. S. Benosman, H. Taïbi, Y. Senhadji, M. Mouli, M. Belbachir, M.I. Bahlouli, Plastic waste particles in mortar composites: sulfate resistance and thermal coefficients. Prog. Rubber, Plast. Recycl. Technol., Smithers Rapra, 33(3) (2017) 171-202.10.1177/147776061703300304 ↗
58. Recommandation de la RILEM LC2, 1978. Classification Fonctionnelle des Bétons légers, no 64, 11. 2.10.1007/BF02551774 ↗