The influence of heat on shrinkage and water absorption of Dendrocalamus giganteus bamboo as a functionally graded material
Source abstract
Abstract
Abstract The main objective is to present the results of an investigation on the effect of heat and time exposure on hygroscopic property of Dendrocalamus giganteus bamboo. The shrinkage and water absorption of bamboo segments in longitudinal, radial and tangential directions, due to heat effect of seven different temperatures from ambient to 225 °C during 3 h and 24 h has been investigated. An equation based on the principal of curve fitting has been established for rapid, transition and slow phases of water absorption. The non-uniform shrinkage and water absorption tests in tangential direction at different temperatures during 3 h carried out to obtain the fiber and matrix shrinkage and water absorption separately. The water absorption test result shows that by increasing the temperature and time exposure the hygroscopic property of bamboo is reduced. Subjecting to heat at higher temperatures can slow down the rate of water absorption in short term.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Introduction to nonconventional materials and an historic retrospective of the field
2. Bamboo as reinforcement in structural concrete elements10.1016/j.cemconcomp.2004.06.002 ↗
3. New approaches to bond between bamboo and concrete10.4028/www.scientific.net/KEM.600.69 ↗
4. Wood modification by heat treatment: a review10.15376/biores.4.1.Esteves ↗
5. The effect of heat treatment on some properties and colour in eucalyptus (Eucalyptus camaldulensis Dehn.) wood
6. Experimental test of heat treatment effect on physical properties of red oak (Quercus falcate Michx.) and southern pine (Pinus taeda L.)10.3390/ma7117314 ↗
7. The water absorption of sapwood and heartwood of Scots pine and Norway spruce heat-treated at 170 °C, 190 °C, 210 °C and 230 °C10.1007/s00107-005-0063-y ↗
8. Water absorption of untreated and thermally modified sapwood and heartwood of Pinus sylvestris10.1007/s00107-016-1044-z ↗
9. An experimental investigation of the effects of moisture content on the mechanical properties of bamboo and cane
10. Effect of thermal treatment on the physical and mechanical properties of Phyllostachys pubescen bamboo10.1007/s00107-012-0643-6 ↗
11. Effects of heat treatment on the properties of bamboo scrimber10.1007/s10086-016-1574-3 ↗
12. Bamboo fibre reinforced biocomposites: a review10.1016/j.matdes.2012.06.015 ↗
13. Pyrolysis kinetics of physical components of wood and wood-polymers using isoconversion method10.3390/agriculture3010012 ↗
14. Kinetic study of wood chips decomposition by TGA10.2478/s11696-009-0109-4 ↗
15. The pyrolysis characteristics of moso bamboo10.1016/j.jaap.2011.10.010 ↗
16. A state-of-the-art review of biomass torrefaction, densification and applications10.1016/j.rser.2014.12.039 ↗
17. Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties10.1016/j.compositesa.2004.04.004 ↗
18. Long-term water absorption behaviour of polypropylene/wood flour/organoclay hybrid nanocomposite
19. Water absorption characteristics of three wood varieties
20. An empirical model for the description of moisture sorption curves10.1111/j.1365-2621.1988.tb13565.x ↗
21. The application of Peleg’s equation to model water absorption during the soaking of red kidney beans (Phaseolus vulgaris L.)10.1016/S0260-8774(97)00034-4 ↗
22. Physical properties of plant and animial materials. Vol. 1. Structure, physical characterisitics and mechanical properties