Influence of type and dosage of micro-fibres on the physical properties of fibre reinforced mortar matrixes
Source abstract
Abstract
Abstract An experimental study is herein presented focusing the physical properties of fibre-reinforced mortar. A reference mortar mixture was adopted and three different types of reinforcement with micro fibres (steel, polypropylene and glass) were adopted, adding different volumetric dosages, ranging from 0.5% to 2%, in 0.5% increments. The influence of each type of fibre and dosage on the properties of the mixture, including workability, density, porosity, and Young’s modulus was analysed. In summary, it was observed that the workability was extremely reduced for polypropylene and glass fibres. It was found that this parameter has an important role in terms of porosity and bulk density. The latter property decreased until 8% when polypropylene or glass fibres were added to the reference mixture. However, the porosity was significantly higher for mixtures with those fibres, with values reaching nearly twice the porosity of the reference mixture. The dynamic Young’s modulus was not highly sensitive to the presence of steel fibres, with a reduction lower than 5% in all tested dosages. In the case of mixtures reinforced with polypropylene fibres and glass fibres, this reduction has reached at most 16% and 13%, respectively. This effect was even higher for the static Young’s modulus, experiencing a maximum reduction of 32%, for a 0.5% dosage of polypropylene fibres.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. M. Vitruvius Pollio, D. Barbaro, I dieci libri dell’architettura, Vinegia, 1556. https://doi.org/10.3931/e-rara-7582.
2. A.C.I. 544.1R-96, State-of-the-Art Report on Fiber Reinforced Concrete, 2002.
3. Virta · 2003
4. Bentur · 2007
5. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete10.1016/j.matdes.2014.01.056 ↗
6. Chawla · 2013
7. Mechanical properties of high-strength steel fiber-reinforced concrete10.1016/j.conbuildmat.2004.04.027 ↗
8. Mechanical properties of steel fiber-reinforced concrete10.1061/(ASCE)0899-1561(2007)19:5(385) ↗
9. An experimental study on the tensile strength of steel fiber reinforced concrete10.1016/j.compositesb.2009.12.003 ↗
10. The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete10.1016/j.conbuildmat.2010.11.084 ↗
11. Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes10.1016/j.conbuildmat.2010.12.022 ↗
12. Toughness enhancement in steel fiber reinforced concrete through fiber hybridization10.1016/j.cemconres.2007.05.005 ↗
13. Flexural strength and behavior of polypropylene fiber reinforced concrete beams10.1007/BF02832623 ↗
14. The mechanical properties of polypropylene fiber reinforced concrete10.1007/BF02835065 ↗
15. Mechanical properties of polypropylene hybrid fiber-reinforced concrete10.1016/j.msea.2008.05.037 ↗
16. Influence of the properties of polypropylene fibres on the fracture behaviour of low-, normal- and high-strength FRC10.1016/j.conbuildmat.2013.03.098 ↗
17. Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials10.1016/0958-9465(95)00003-8 ↗
18. The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete10.1016/j.conbuildmat.2010.06.018 ↗
19. The effects of polypropylene fibers on the properties of reinforced concrete structures10.1016/j.conbuildmat.2011.08.015 ↗
20. Mechanical and microstructural features of autoclaved aerated concrete reinforced with autoclaved polypropylene, carbon, basalt and glass fiber10.1016/j.conbuildmat.2015.08.104 ↗
21. Strength properties of glass fibre concrete
22. An investigation on strength properties of glass fiber reinforced concrete
23. Glass fibre concrete: investigation on strength and fire resistant properties
24. Mechanical properties of glass fiber reinforced concrete10.33899/rengj.2012.61048 ↗
25. Mechanical properties of glass fiber reinforced ceramic concrete10.1016/j.conbuildmat.2013.10.046 ↗
26. Young’s modulus of fiber-reinforced and polymer-modified lightweight concrete composites10.1016/j.conbuildmat.2007.03.017 ↗
27. Workability of hybrid fiber reinforced self-compacting concrete10.1016/j.buildenv.2004.12.014 ↗
28. The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete10.1016/j.conbuildmat.2007.03.034 ↗
29. Effective elastic properties of porous materials: Homogenization schemes vs experimental data10.1016/j.mechrescom.2011.01.009 ↗
30. EN 196-1:1996, Methods of Testing Cement. Determination of Strength, 1996.
31. Test and design methods for steel fibre reinforced concrete. Bending test. Final recommendation10.1617/13884 ↗
32. E 397-1993. Betões: Determinação do módulo de elasticidade em compressão, 1993.
33. Lourenço · 2004
34. About pycnometric density measurements10.1016/S0039-9140(02)00058-9 ↗
35. Using compression wave ultrasonic transducers to measure the velocity of surface waves and hence determine dynamic modulus of elasticity for concrete10.1016/0950-0618(96)00003-7 ↗
36. ASTM C 1259-94, Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration, 1994.
37. EN 1015-3:1999, Methods of Test for Mortar for Masonry. Determination of Consistence of Fresh Mortar (by Flow Table), 1999.
38. A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete10.1016/j.conbuildmat.2015.08.110 ↗
39. The influence of concrete composition on Young’s modulus10.1016/j.proeng.2015.06.181 ↗
40. Structural use of concrete-Part 2: Code of practice for special circumstances