Recyclability potential of asphalt mixes containing reclaimed asphalt pavement and industrial by-products
Source abstract
Abstract
The aim of this study was the evaluation and validation of the recyclability potential of asphalt mixturesthat incorporate high proportions of by-products (electric arc furnace slag and foundry sand) andreclaimed asphalt pavement in their composition. In a first stage, the performance of these asphalt mixeswas assessed using mechanical tests such as Marshall, water sensitivity, wheel tracking, stiffness andresistance to fatigue. Then, the samples underwent thermal aging treatment in order to be used asRAP in the manufacturing of new samples. Two rejuvenators were studied to check their effectivenessfor the purpose of achieving this aim. Finally, the mechanical performance of these new mixes was eval-uated. The results demonstrated a suitable technical performance and a good recyclability of the asphaltmixes used to replace practically all conventional aggregates. However, appropriate design and evalua-tion of the mixes is required, assessing the binder properties and the mechanical performance of theasphalt mix as well as evaluating its fatigue performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A review of the use of recycled solid waste materials in asphalt pavements10.1016/j.resconrec.2007.02.002 ↗
2. An overview on alternative binders for flexible pavement10.1016/j.conbuildmat.2015.03.068 ↗
3. Evaluation of moderate and high RAP mixtures at laboratory and pavement scales10.1080/10298436.2015.1066007 ↗
4. Hot mix asphalt with high RAP content10.1016/j.proeng.2015.08.009 ↗
5. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art10.1080/10298436.2014.893331 ↗
6. Rutting characterization of warm mix asphalt and high RAP mixtures10.1080/14680629.2012.657042 ↗
7. Evaluation of high modulus mixture behaviour with high reclaimed asphalt pavement (RAP) percentages for sustainable road construction10.1016/j.conbuildmat.2011.04.006 ↗
8. Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2010.09.016 ↗
9. 100% recycled hot mix asphalt: A review and analysis10.1016/j.resconrec.2014.07.007 ↗
10. Are totally recycled hot mix asphalts a sustainable alternative for road paving?10.1016/j.resconrec.2011.11.013 ↗
11. Towards 100% recycling of reclaimed asphalt in road surface courses: binder design methodology and case studies10.1016/j.jclepro.2016.05.093 ↗
12. Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance10.1016/j.resconrec.2015.08.014 ↗
13. Hybrid life cycle assessment for asphalt mixtures with high RAP content10.1016/j.resconrec.2013.12.004 ↗
14. Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures10.1016/j.conbuildmat.2014.08.073 ↗
15. Improving asphalt mixture performance by partially replacing bitumen with waste motor oil and elastomer modifiers10.3390/app7080794 ↗
16. Recycled asphalt mixtures produced with high percentage of different waste materials10.1016/j.conbuildmat.2015.03.063 ↗
17. Analysis of the influence of using recycled polystyrene as a substitute for bitumen in the behaviour of asphalt concrete mixtures10.1016/j.jclepro.2017.09.232 ↗
18. POLYMIX: polymeric waste in asphalt mixes
19. Performance comparison between different sourced bioasphalts and asphalt mixtures10.1061/(ASCE)MT.1943-5533.0002247 ↗
20. Laboratory investigation on chemical and rheological properties of bio-asphalt binders incorporating waste cooking oil10.1016/j.conbuildmat.2018.02.038 ↗
21. Rheological characteristics of synthetic road binders10.1016/j.fuel.2008.01.012 ↗
22. Mechanical, surface and environmental evaluation of stone mastic asphalt mixtures with advanced asphalt binders using waste materials
23. Effect of incorporating different waste materials in bitumen10.1016/j.ctmat.2016.07.003 ↗
24. Environmental characterization of Foundry Waste Sand (WFS) in hot mix asphalt (HMA) mixtures10.1016/j.conbuildmat.2018.03.151 ↗
25. Performance evaluation of asphalt mixtures containing recycled concrete aggregates10.1080/10298436.2017.1402594 ↗
26. Evaluation of rutting potential for asphalt concrete mixes containing copper slag10.1080/10298436.2016.1199875 ↗
27. Investigating the indirect tensile stiffness, toughness and fatigue life of hot mix asphalt containing copper slag powder
28. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates10.1080/10298436.2014.953502 ↗
29. Laboratory evaluation of recycled waste concrete into asphalt mixtures10.1080/10298436.2012.747685 ↗
30. Harvesting the unexplored potential of European waste materials for road construction10.1016/j.resconrec.2016.09.008 ↗
31. Performance and thermal evaluation of incorporating waste ceramic aggregates in wearing layer of asphalt pavement10.1061/(ASCE)MT.1943-5533.0000788 ↗
32. Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt10.1016/j.conbuildmat.2012.06.015 ↗
33. EUROSLAG, Position paper on the status of ferrous slag, 2012. http://www.euroslag.com/fileadmin/_media/images/Status_of_slag/Position_Paper_April_2012.pdf (accessed 13 July 2018).
34. EAF slag in asphalt mixes: a brief review of its possible re-use10.1016/j.resconrec.2016.12.009 ↗
35. Experimental investigation of stone matrix asphalt mixtures containing steel slag10.1016/j.scient.2012.07.007 ↗
36. Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag10.1016/j.conbuildmat.2013.08.034 ↗
37. Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags10.1016/j.jhazmat.2010.05.104 ↗
38. Mix design and performance analysis of asphalt concretes with electric arc furnace slag10.1016/j.conbuildmat.2011.03.037 ↗
39. Fatigue performance of asphalt concretes with RAP aggregates and steel slags
40. Effect of copper slag addition on mechanical behavior of asphalt mixes containing reclaimed asphalt pavement10.1016/j.conbuildmat.2016.05.081 ↗
41. Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture10.1016/j.conbuildmat.2007.11.001 ↗
42. Evaluation of Marshall stiffness, indirect tensile stress and resilient modulus in asphalt mixes with reclaimed asphalt pavement and copper slag10.4067/S0718-50732017000100002 ↗
43. The rheological transformation of bitumen during the recycling of repetitively aged asphalt pavement10.1080/14680629.2017.1304266 ↗
44. Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: susceptibility to aging level and freeze and thaw cycles10.1016/j.conbuildmat.2017.09.116 ↗
45. Fatigue characterization of asphalt mixes containing electric arc furnace (EAF) steel slag subjected to long term aging10.1016/j.conbuildmat.2014.08.052 ↗
46. Characterising the long-term rejuvenating effectiveness of recycling agents on asphalt blends and mixtures with high RAP and RAS contents10.1080/14680629.2017.1389074 ↗
47. Effects of laboratory aging on properties of biorejuvenated asphalt binders10.1061/(ASCE)MT.1943-5533.0001995 ↗
48. Aging of rejuvenated asphalt binders10.1155/2017/8426475 ↗
49. Dirección General de Carreteras, Pliego de Prescripciones Técnicas Generales para Obras de Carreteras y Puentes, PG-3 (Spanish General Technical Specifications for Roads and Bridge Works, PG-3), 2017. https://fomento.gob.es/NR/rdonlyres/7E090150-7354-4F83-8D4E-E4BA2BE70717/141045/PG3_PARTE_5.pdf (accessed 11 July 2018).
50. State of the art report on ageing test methods for bituminous pavement materials10.1080/1029843042000198568 ↗
51. Laboratory evaluation of resistance to moisture damage in asphalt mixtures10.1016/j.asej.2012.10.009 ↗