Frost durability and stress–strain relationship of lining shotcrete in cold environment
Source abstract
Abstract
Abstract Given the different hydration processes of normal concrete without accelerator, shotcrete with accelerator has not only a short setting time and high early mechanical properties, but also different hydration products and microstructures. In high latitude and altitude areas, shotcrete lining structures are subject to freeze–thaw cycles. Thus, the durability, bearing capacity, and service life of lining shotcrete is critically threatened. In this work, a freezing–thawing durability experiment was conducted using the accelerated frost method. Dynamic elastic modulus, weight, compressive and splitting tensile strength, and the stress–strain relationship of frost–damaged shotcrete were measured for a study of the durability and mechanical property degradation rules. Microstructures, through pore structure analysis and microscopic characterization, were identified for elucidating the deterioration mechanism of the mechanical properties of shotcrete. After frost damage, the volume percentage of harmless pores rapidly decreased, whereas porosity increased. Micro-cracks appeared in interfacial transition zone grew into mortars and connected to form main cracks, which accelerated the microstructure damage. Physical and mechanical properties of shotcrete decreased with prolonged freeze–thaw cycles. However, the peak stress and toughness of shotcrete decreased, whereas peak strain, initial elastic modulus, and ultimate compression strain increased. Therefore, steel fiber reinforced shotcrete had improved frost durability and reduced growth ratio of porosity under the bridging effect.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Thomas · 2012 · 9
2. Hemphill · 2013 · 309
3. Microstructure, permeability and mechanical properties of accelerated shotcrete at different curing age10.1016/j.conbuildmat.2014.12.111 ↗
4. A case history: effect of moisture on the setting behavior of a Portland cement reacting with an alkali-free accelerator10.1016/j.cemconres.2007.02.020 ↗
5. Mechanical performance of shotcrete made with a high-strength cement-based mineral accelerator10.1016/j.conbuildmat.2013.08.014 ↗
6. Mechanism of wet shotcrete interacting with rock in support systems10.1007/s11771-013-1553-4 ↗
7. Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition10.1016/j.cemconres.2004.05.033 ↗
8. Sprayed concrete for final linings: ITA working group report10.1016/S0886-7798(01)00052-9 ↗
9. Long-term deterioration of lining in tunnels10.1016/j.ijrmms.2013.08.028 ↗
10. Durability of concrete-degradation phenomena involving detrimental chemical reactions10.1016/j.cemconres.2007.09.015 ↗
11. Strength and durability of coconut-fiber-reinforced concrete in aggressive environments10.1016/j.conbuildmat.2012.09.002 ↗
12. Variability of stress-strain relationship for recycled aggregate concrete under uniaxial compression loading
13. Effects of steel fiber and strain rate on the dynamic compressive stress-strain relationship in reactive powder concrete10.1016/j.conbuildmat.2018.03.101 ↗
14. Alkali-activated concrete: engineering properties and stress–strain behavior10.1016/j.conbuildmat.2015.04.039 ↗
15. Experimental investigation of whole stress-strain curves of coral concrete10.1016/j.conbuildmat.2016.06.064 ↗
16. Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: the influences of silica fume and air-entraining agent10.1016/j.cemconcomp.2016.03.012 ↗
17. Investigating freeze-proof durability of C25 shotcrete10.1016/j.conbuildmat.2014.02.077 ↗
18. Investigation of microstructural damage in shotcrete under a freeze–thaw environment10.1016/j.conbuildmat.2015.02.042 ↗
19. An experimental study on the effect of accelerator and chemical admixture type for the durability of shotcrete
20. Durability characteristics of high performance shotcrete for permanent support of large size underground space10.4334/JKCI.2007.19.6.701 ↗
21. Influence of a C12A7 mineral-cased accelerator on the strength and durability of shotcrete10.1016/j.cemconres.2007.09.016 ↗
22. Experimental study on debonding of shotcrete with acoustic emission during freezing and thawing cycle10.1016/j.coldregions.2014.11.014 ↗
23. GB 175-2007 · 2007
24. GB/T 1596-2005 · 2005
25. GB 8076-2008 · 2008
26. JC477-2005 · 2005
27. GB 50082-2009 · 2010
28. Experimental investigation of the complete stress-strain curve of concrete
29. An approach to the recent trends of concrete science and technology