journal article·2019-03

Mesostructured property of aggregate disruption in asphalt mixture based on digital image processing method

Chao Xing, Huining Xu, Yiqiu Tan, Xueyan Liu, Qing Ye

Publisher page

Abstract

Abstract Aggregate skeleton is the main load carrying part, which is important for the performance of asphalt mixture. Fine aggregate break the skeleton of coarse aggregate is defined as disruption. Based on the X-ray computed tomography and digital image process method, this paper aim to evaluate and verify the disruption in asphalt mixture, and then discuss the effect of disruption on the mesostructure and aggregate contact. Firstly, the aggregate classification and contact property calculation method are proposed. Based on the methods, the relation between disruption factor and contact property is analyzed. The results indicate that there is a strong linear trend between the distance of the main skeleton aggregate and disruption factor, and the disruption factor can well represent the expanding effect of disruption aggregate on the main skeleton aggregate. Additionally, higher disruption factor will leads to the decrease of the number of contact between the main skeleton aggregate and the increase of the contact number of the disruption aggregate. Further, if asphalt mixture has lower disruption factor, the internal contact between the main skeleton aggregates is closer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Performance-based design of asphalt mixtures and review of key parameters10.1016/j.matdes.2017.12.035 ↗
2. Aggregate gradations on moisture and rutting resistances of open graded friction course mixtures10.1016/j.conbuildmat.2015.03.095 ↗
3. Coarse-versus fine-graded superpave mixtures: comparative evaluation of resistance to rutting10.3141/1789-24 ↗
4. The laws of proportioning concrete10.1061/TACEAT.0001979 ↗
5. Aggregate blending for asphalt mix design: Bailey method10.3141/1789-16 ↗
6. Laboratory evaluation for rutting performance based on the DASR porosity of asphalt mixture10.1080/14680629.2008.9690126 ↗
7. Porosity of the dominant aggregate size range to evaluate coarse aggregate structure of asphalt mixtures10.1061/(ASCE)0899-1561(2009)21:1(32) ↗
8. Disruption factor of asphalt mixtures10.1080/10298436.2012.727992 ↗
9. Packing theory-based framework to evaluate permanent deformation of unbound granular materials10.1080/10298436.2012.736620 ↗
10. Binder distribution model for asphalt mixtures based on packing of the primary structure10.1080/10298436.2014.937713 ↗
11. Gradation-based framework for asphalt mixture10.1617/s11527-012-9982-3 ↗
12. Internal structural evolution of asphalt mixtures during freeze-thaw cycles10.1016/j.matdes.2015.07.073 ↗
13. Permeability of asphalt mixtures exposed to freeze-thaw cycles10.1016/j.coldregions.2015.12.001 ↗
14. Moisture seepage in asphalt mixture using X-ray imaging technology10.1016/j.ijheatmasstransfer.2018.11.081 ↗
15. Three-dimensional image processing methods to identify and characterise aggregates in compacted asphalt mixtures10.1080/10298431003749725 ↗
16. An improved image processing technique for asphalt concrete X-ray CT images10.1080/14680629.2013.794370 ↗
17. Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis10.1080/14680629.2012.711923 ↗
18. Image analysis for detecting aggregate gradation in asphalt mixture from planar images10.1016/j.conbuildmat.2011.08.007 ↗
19. Effect of particle mobility on aggregate structure formation in asphalt mixtures10.1080/14680629.2013.812844 ↗
20. Effect of compaction conditions on aggregate packing using 2-dimensional image analysis and the relation to performance of HMA10.1617/s11527-014-0275-x ↗
21. Internal structure characterization of asphalt mixtures for rutting performance using imaging analysis10.1080/14680629.2012.657045 ↗
22. Effect of aggregate contact condition on skeleton stability in asphalt mixture
23. Study on microstructure of rubberized recycled hot mix asphalt based X-ray CT technology10.1016/j.conbuildmat.2016.05.166 ↗
24. Compaction characteristics of asphalt mixture with different gradation type through Superpave Gyratory Compaction and X-Ray CT Scanning10.1016/j.conbuildmat.2016.10.098 ↗
25. McGennis · 1995
26. Gradation measurement of asphalt mixture by X-Ray CT images and digital image processing methods10.1016/j.measurement.2018.09.066 ↗
27. Characterize packing of aggregate particles for paving materials: particle size impact10.1016/j.conbuildmat.2010.09.008 ↗
28. An automated procedure for computing the packing properties of dense and locked sands by image analysis of thin sections [J]10.1007/s10035-014-0532-2 ↗
29. Evaluating the mastic distribution of asphalt mixtures based on a new thickness threshold using 2D image planers10.1080/14680629.2017.1323001 ↗