Design and properties of cement coating with mussel shell fine aggregate
Source abstract
Abstract
[Abstract:] The production of farmed mussels amounts to millions of tonnes across over 40 countries. Shell waste resulting from this production has a very significant environmental impact. In Galicia, mussel shell waste is transformed, using low impact heat treatment, into a by-product that can be used as an aggregate. This research investigates cement-coating mortars where conventional aggregate is partially replaced with mussel shell aggregate. Reference mortars and mortars with mussel shell sand replacing conventional sand at different rates: 25%, 50% and 75% have been tested. Results show the feasibility of mussel shell in cement coatings at an optimal replacement rate of 25% of the conventional aggregate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. European Aggregates Association, GAIN – Global Aggregates Information Network, Http://Www.Uepg.Eu/Media-Room/Links/Gain-Global-Aggregates-Information-Network. (2017). http://www.uepg.eu/media-room/links/gain-global-aggregates-information-network (accessed 11 December 2018).
2. ANEFA, Official web of ANEFA, El Consum. Áridos Creció Un 10,5% En 2017, Hast. Los 112 Millones Toneladas. (n.d.). http://www.aridos.org/el-consumo-de-aridos-crecio-un-105-en-2017-hasta-los-112-millones-de-toneladas/ (accessed 4 December 2018).
3. Recycling of seashell waste in concrete: a review10.1016/j.conbuildmat.2017.12.009 ↗
4. Green concrete partially comprised of farming waste residues: a review10.1016/j.jclepro.2016.01.022 ↗
5. The use of hazardous sludge solidification and green-lipped mussel shells in cementitious material: a case study of ngcc power plant of priok10.1051/matecconf/201814701008 ↗
6. Optimization of compressive strength of concrete with pig-hair fibers as fiber reinforcement and green mussel shells as partial cement substitute10.21660/2017.31.6528 ↗
7. Use of limestone obtained from waste of the mussel cannery industry for the production of mortars10.1016/j.cemconres.2007.01.004 ↗
8. A review on seashells ash as partial cement replacement10.1088/1757-899X/271/1/012059 ↗
9. Valorization of glass and shell powders in the synthesis of Belitic clinker10.1051/matecconf/201814901021 ↗
10. Chemical – mechanical characteristics of crushed oyster-shell10.1016/S0956-053X(02)00159-9 ↗
11. Oyster shell as substitute for aggregate in mortar10.1177/0734242X04042456 ↗
12. Study of the material properties of fly ash added to oyster cement mortar10.1016/j.conbuildmat.2012.11.021 ↗
13. Estimating unconfined compressive strength of cockle shell-cement-sand mixtures using soft computing methodologies10.1016/j.engstruct.2015.03.070 ↗
14. Feasibility of pulverized oyster shell as a cementing material10.1155/2013/809247 ↗
15. Prediction early age compressive strength of OPC-based geopolymers with different alkali activators and seashell powder by gene expression programming10.1016/j.ceramint.2012.07.086 ↗
16. Utilization of ground waste seashells in cement mortars for masonry and plastering10.1016/j.jenvman.2012.06.032 ↗
17. Shell microstructures of mussels (Bivalvia: Mytilidae: Bathymodiolinae) from deep-sea chemosynthetic sites: Do they have a phylogenetic significance?
18. López, Performance of mussel shell as aggregate in plain concrete10.1016/j.conbuildmat.2016.09.091 ↗
19. Effect of saccharides on the hydration of ordinary Portland cement10.1016/j.conbuildmat.2017.05.149 ↗
20. Mechanical rheological and morphological analysis of cement-based composites with a new LAS-based air entraining agent10.1016/j.conbuildmat.2017.04.024 ↗
21. A. Sepulcre-Aguilar, Influencia de las Adiciones Puzolánicas en los morteros de restauración de fábricas de interés Historico-Artistico, Universidad Politécnica de Madrid, 2005. http://oa.upm.es/264/1/Alberto_Sepulcre.pdf.
22. A. Acosta, E. Herrero, J.R. Rosell, D. Sanz, Guía práctica para los morteros con cal, in: 2011.
23. Los morteros. Control de calidad10.3989/ic.1994.v46.i433.1117 ↗
24. European Parliament and Council, Regulation (EC) No 1069/2009, Off. J. Eur. Union. 300 (2009) 1–33.
25. AENOR, UNE-EN 1097-6, Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption., (2006).
26. AENOR, UNE-EN 1744-1,Tests for chemical properties of aggregates. Part 1: Chemical analysis., (2014) 64.
27. AENOR, UNE 103204, Organic matter content of a soil by the potassium permanganate method., (1993) 4.
28. AENOR, UNE-EN 933-8. Test for geometrical properties of aggregates. Part 8: Assessment of fines. Sand equivalent test., (2012) 22.
29. AENOR, UNE-EN 1015-11, Methods of test for mortar for masonry. Part 11: Determination of flexural and compressive strength of hardened mortar., (2007) 8.
30. AENOR, UNE-EN 1015-10, Methods of test for mortar for masonry. Part 10: Determination of dry bulk density of hardened mortar., 2000.
31. AENOR, UNE-EN 1015-18, Methods of test for mortar for masonry. Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar., (2003) 11.
32. AENOR, UNE-EN 12808-4, Grouts for tiles. Part 4: Determination of shrinkage., 2010.
33. AENOR, UNE-EN 413-2, Masonry cement. Part 2: Test methods., (2006) 20.
34. AENOR, UNE-EN 1015-9, UNE-EN 1015-9, Methods of test for mortar for masonry. Part 3: Determination of consistence of fresh mortar (by flow table)., 2007.
35. AENOR, UNE 83980, Concrete durability. Test methods. Determination of the water absorption, density and accessible porosity for water in concrete, 2014.
36. Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties10.1016/j.cemconres.2005.03.016 ↗
37. The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)10.1016/j.conbuildmat.2015.01.009 ↗
38. M. Khudhair, B. el hilal, A. Elharfi, Review on chemical (organic) admixtures in the cementitious materials, 2018. doi:10.26872/jmes.2018.9.6.192.
39. Effect of the addition of chitosan ethers on the fresh state properties of cement mortars10.1016/j.cemconcomp.2012.04.010 ↗
40. Recycled polyamide mortars modified with non-ionic surfactant: physical and mechanical strength after durability tests10.1617/s11527-015-0726-z ↗
41. Influence of the air-entraining admixture with different superplasticizers on the freeze-thaw resistance of cement mortars | Influenţa aditivului antrenor de aer combinat cu diferiti superplastifianţi asupra rezistenţei la îngheţ – dezgheţ a mortarelor de
42. Feasibility of using sea shells ash as admixtures for concrete
43. Development and characterization of blended cements containing seashell powder10.1016/j.conbuildmat.2017.11.111 ↗
44. Dynamic retarder exchange as a trigger for Portland cement hydration10.1016/j.cemconres.2014.04.007 ↗
45. I.B. Topcu, O. Atesin, T. Uygunoglu, Effect of High Dosage Air-Entraining Admixture Usage on Micro Concrete Properties, EJENS (European J. Eng. Nat. Sci. (2017).
46. Influences of organic matter and calcification rate on trace elements in aragonitic estuarine bivalve shells10.1016/j.gca.2008.09.003 ↗
47. P. Dalbeck, J. England, M. Cusack, M. Lee, A.E. Fallick, Crystallography and chemistry of the calcium carbonate polymorph switch in M. edulis shells, 2006. doi:10.1127/0935-1221/2006/0018-0601.10.1127/0935-1221/2006/0018-0601 ↗
48. In situ mapping of growth lines in the calcitic prismatic layers of mollusc shells using X-ray absorption near-edge structure (XANES) spectroscopy at the sulphur K-edge10.1007/s00227-002-0950-2 ↗
49. Amino acids in the proteins from aragonite and calcite in the shells of Mytilus californianus10.1126/science.139.3551.216 ↗
50. Effect of substitution of wood shavings by barley straws on the physico-mechanical properties of lightweight sand concrete10.1016/j.conbuildmat.2014.05.090 ↗
51. An environmentally friendly thermal insulation material from sunflower stalk, textile waste and stubble fibres10.1016/j.conbuildmat.2013.10.038 ↗
52. Biofibres and biocomposites10.1016/j.carbpol.2007.05.040 ↗
53. Cement hydration inhibition with sucrose, tartaric acid, and lignosulfonate: Analytical and spectroscopic study10.1021/ie060806t ↗
54. The effect of glucose and some glucose oxidation products on the hydration of tricalcium aluminate10.1016/0008-8846(77)90007-2 ↗
55. The retarding action of sugars on cement hydration10.1016/0008-8846(83)90084-4 ↗
56. Manufacture of wood-cement boards VII: cement-hardening inhibitory compounds of hannoki (Japanese alder, Alnus japonica Steud.)10.1007/BF00771375 ↗
57. Long-term influence of chitin concentration on the resistance of cement pastes determined by atomic force microscopy10.1002/pssa.201600105 ↗
58. The influence of sugars on the hydration of tricalcium aluminate
59. Microstructure of entrained air voids in concrete, Part I10.1557/JMR.1991.2004 ↗
60. Effect of air entrainment on shrinkage of blended cements concretes10.1016/j.conbuildmat.2015.09.018 ↗
61. Empirical Estimation of Pore Size Distribution in Cement
62. Mechanical properties of natural hydraulic lime-based mortars10.1016/j.cemconres.2004.02.005 ↗
63. Lime-pastes with different kneading water: Pore structure and capillary porosity10.1016/j.apsusc.2005.02.145 ↗
64. AENOR, UNE-EN 998-1, Specification for mortar for masonry. Part 1: Rendering and plastering mortar., (2010) 26.
65. Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastes10.1016/j.conbuildmat.2015.12.171 ↗
66. C.P. Woon, P.N. Shek, M.M. Tahir, A.B.H. Kueh, Compressive Strength of Ground Waste Seashells in Cement Mortars for Masonry and Plastering, in: Front. Mech. Eng. Mater. Eng. III, Trans Tech Publications, 2015: pp. 167–170. doi:10.4028/www.scientific.net/AMM.727-728.167.10.4028/www.scientific.net/AMM.727-728.167 ↗
67. Development of eco-friendly mortars incorporating glass and shell powders10.1016/j.conbuildmat.2017.10.125 ↗
68. Properties of cement-based bricks with oyster-shells ash10.1016/j.jclepro.2014.12.023 ↗
69. A comparative analysis of the properties of recycled and natural aggregate in masonry mortars10.1016/j.conbuildmat.2013.08.049 ↗
70. Engineering properties of controlled low-strength materials containing waste oyster shells10.1016/j.conbuildmat.2013.04.020 ↗
71. Effect of protein additive on properties of mortar10.1016/j.cemconcomp.2005.12.007 ↗