journal article·2019-10

Investigating the spatial development of corrosion of corner-located steel bar in concrete by X-ray computed tomography

Xun Xi, Shangtong Yang

Publisher page

Abstract

In this paper, the chloride-induced corrosion progression of a corner located steel bar in concrete is investigated by X-ray computed tomography (i.e., X-CT). Corrosion of steel bar is accelerated by placing the reinforced specimen in a wetting and drying cyclic corrosive environment, rather than by the impressed current method. 3D X-CT images are obtained and processed to characterize the different material phases, consisting of, steel bar, mortar, corrosion products and voids/cracks. The corrosion products expansion and concrete cracking are analysed and discussed. It has been found that pitting corrosion is prone to appear around the voids close to the steel bar, mainly due to the pre-existing supply of oxygen and moisture. In addition, a distinct transverse crack has been identified which is caused by non-uniform corrosion along the reinforcing steel bar. Within the cross-section, corrosion has also been found non-uniformly distributed, with the maximum rust layer pointing to the corner edge of the sample. Moreover, the corrosion rust distributions are used to parameterize a recently developed non-uniform corrosion model. This experimentally validated non-uniform corrosion model can be applied to corrosion-induced concrete cracking problems with confirmed accuracy. The combination of the use of wetting and drying cyclic corrosive environment and the X-CT scanning can provide a new method to the non-destructive investigation of corrosion process, rust distribution and corrosion-induced concrete cracking in the reinforced concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. I. NACE, International Measures of Prevention, Application and Economics of Corrosion Technology (IMPACT), Houston, Texas. USA, 2016.
2. Characterization of steel corrosion in mortar by various electrochemical and physical techniques10.1016/j.corsci.2013.05.015 ↗
3. Environmental effects on cover cracking due to corrosion10.1016/j.cemconres.2010.05.003 ↗
4. The size effect in corrosion greatly influences the predicted life span of concrete infrastructures10.1126/sciadv.1700751 ↗
5. Physical model for steel corrosion in concrete sea structures – theory10.1061/JSDEAG.0005168 ↗
6. Model for cover cracking due to rebar corrosion in RC structures10.1016/j.engstruct.2005.11.014 ↗
7. Numerical determination of concrete crack width for corrosion-affected concrete structures10.1016/j.compstruc.2017.07.016 ↗
8. Meso-scale mixed-mode fracture modelling of reinforced concrete structures subjected to non-uniform corrosion10.1016/j.engfracmech.2018.05.036 ↗
9. Numerical simulation of behavior of reinforced concrete structures considering corrosion effects on bonding10.1061/(ASCE)ST.1943-541X.0001021 ↗
10. Prediction of concrete crack width under combined reinforcement corrosion and applied load
11. Reinforcement corrosion initiation and activation times in concrete structures exposed to severe marine environments10.1016/j.cemconres.2009.07.003 ↗
12. On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion10.1016/j.corsci.2010.03.025 ↗
13. Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars10.1016/j.conbuildmat.2017.08.051 ↗
14. Numerical modeling of nonuniform corrosion-induced concrete crack width10.1061/(ASCE)ST.1943-541X.0002108 ↗
15. Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement10.1016/0008-8846(95)00006-2 ↗
16. Cover cracking as a function of rebar corrosion: Part 1-experiment test10.1007/BF02472805 ↗
17. Spatial variability of pitting corrosion and its influence on structural fragility and reliability of RC beams in flexure10.1016/j.strusafe.2004.03.002 ↗
18. Probability distribution model for cross-sectional area of corroded reinforcing steel bars10.1061/(ASCE)MT.1943-5533.0000888 ↗
19. Corrosion-induced cover cracking: new test data and predictive models
20. Times to cracking in reinforced mortar beams subjected to accelerated corrosion tests
21. Use of a 3D optical measurement technique for stochastic corrosion pattern analysis of reinforcing bars subjected to accelerated corrosion10.1016/j.corsci.2013.03.037 ↗
22. Corrosion-induced cracking: experimental data and predictive models
23. Corrosion products of reinforcing bars embedded in concrete10.1016/0010-938X(93)90382-Q ↗
24. Initiation of chloride-induced reinforcement corrosion in concrete structural members – experimentation
25. Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks10.1016/j.corsci.2017.01.002 ↗
26. Analyzing crack width to predict corrosion in reinforced concrete10.1016/S0008-8846(03)00246-1 ↗
27. Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process10.1016/j.cemconres.2009.09.026 ↗
28. Modeling corroded section configuration of steel bar in concrete structure10.1016/j.conbuildmat.2008.09.026 ↗
29. Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer10.1016/j.corsci.2011.05.017 ↗
30. Crack shape and rust distribution in corrosion-induced cracking concrete10.1016/j.corsci.2011.11.002 ↗
31. Non-uniform distribution of a corrosion layer at a steel/concrete interface described by a Gaussian model10.1016/j.corsci.2016.06.021 ↗
32. Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover10.1016/j.conbuildmat.2017.09.033 ↗
33. Non-uniform distribution of rust layer around steel bar in concrete10.1016/j.corsci.2011.08.045 ↗
34. Shape of corrosion-induced cracks in recycled aggregate concrete10.1016/j.corsci.2015.05.028 ↗
35. Quantification of steel-concrete interface in reinforced concrete using Backscattered Electron imaging technique10.1016/j.conbuildmat.2018.05.246 ↗
36. Influence of environment on the development of corrosion product-filled paste and a corrosion layer at the steel/concrete interface10.1016/j.corsci.2017.03.026 ↗
37. Effect of mill scale on the long-term corrosion resistance of a low-alloy reinforcing steel in concrete subjected to chloride solution10.1016/j.conbuildmat.2017.12.125 ↗
38. Pore structure characterization of coal by synchrotron radiation nano-CT10.1016/j.fuel.2017.11.014 ↗
39. ‘Microbial mortar’-restoration of degraded marble structures with microbially induced carbonate precipitation10.1016/j.conbuildmat.2018.05.200 ↗
40. Two-dimensional simulations of concrete fracture at aggregate level with cohesive elements based on X-ray μCT images10.1016/j.engfracmech.2016.09.012 ↗
41. X-ray computed tomography and nondestructive evaluation of clogging in porous concrete field samples10.1061/(ASCE)MT.1943-5533.0000484 ↗
42. Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen10.1016/j.conbuildmat.2014.06.049 ↗
43. Mesoscopic modeling method of concrete based on statistical analysis of CT images10.1016/j.conbuildmat.2018.10.136 ↗
44. Application of X-ray tomography for the verification of corrosion processes in chloride contaminated mortar10.1002/maco.200604049 ↗
45. Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive X-ray attenuation measurements10.1016/j.cemconres.2011.06.006 ↗
46. Corrosion induced cover cracking studied by X-ray computed tomography, nanoindentation, and energy dispersive X-ray spectrometry (EDS)10.1617/s11527-014-0292-9 ↗
47. Monitoring reinforcement corrosion and corrosion-induced cracking by X-ray microcomputed tomography method10.1016/j.cemconres.2017.07.009 ↗
48. In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste10.1016/j.corsci.2014.03.010 ↗
49. Prediction model for the time-varying corrosion rate of rebar based on micro-environment in concrete10.1016/j.conbuildmat.2012.04.077 ↗
50. Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures10.1016/j.cemconres.2010.03.018 ↗
51. Cracking of the concrete cover due to reinforcement corrosion: a two-dimensional lattice model study10.1016/j.conbuildmat.2013.03.063 ↗
52. A non-uniform corrosion model and meso-scale fracture modelling of concrete10.1016/j.cemconres.2018.03.009 ↗
53. Recursive erosion, dilation, opening, and closing transforms10.1109/83.366481 ↗
54. Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion10.1016/j.engfailanal.2015.03.019 ↗
55. Compensation length of two-dimensional chloride diffusion in concrete using a boundary element model10.1007/s00707-012-0721-1 ↗