Strength properties and microstructural analysis of self-compacting concrete incorporating waste foundry sand
Source abstract
Abstract
Abstract Waste Foundry Sand (WFS) is a solid waste generated from the metal casting industry. Globally, casting production is about 105 million metric tons per year, about 0.60 ton of WFS is produced per 1 ton of cast steel production. Hence, the yearly production of WFS is approximately 62.64 million metric tons. Therefore, disposal of WFS generated from the casting industry poses serious environmental problems. On the other hand, continuous extraction of natural resources is depleting the environment at a rapid pace increasing the cost of production due to an insufficiency of natural resources. This paper presents the results of an experimental investigation on the influence of waste foundry sand (WFS) as a fine aggregate replacement on the fresh, strength and micro-structural properties of self-compacting concrete (SCC). Initially, control SCC was designed and then, fine aggregates were replaced with 5, 10, 15, 20, 25 and 30% of WFS by volume. The fresh state properties of SCC were evaluated using slump flow, T500, V-funnel-box, and U-box test. Strength and microstructural investigations were carried up to the age of 365 days. Tests results indicate all concrete mixes exhibited the properties of fresh state SCC. The 28-day compressive strength of control SCC was 58 MPa. There was 6.38–18.76% reduction in the strength of SCC with the use of 5–30% WFS at 28 days. Micro-structural results of XRD and SEM validate the experimental results. Hence, WFS could be suitably used in the manufacturing of SCC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Home : GCCA, https://gccassociation.org/ (accessed June 18, 2019).
2. Global Casting Production expands, Census of world casting production. American foundry society. Metal casting design & purchasing jan/feb 2019 pp 27-29.
3. The Institute of Indian Foundrymen, https://www.indianfoundry.org/cms-index.php (accessed June 18, 2019).
4. Waste foundry sand in concrete: a review10.1016/j.conbuildmat.2017.09.010 ↗
5. Using foundry sand in green infrastructure construction
6. Utilization of waste foundry sand (WFS) in concrete manufacturing10.1016/j.resconrec.2011.05.001 ↗
7. Waste foundry sand and its leachate characteristics10.1016/j.resconrec.2010.04.006 ↗
8. Environmental characterization of Foundry Waste Sand (WFS) in hot mix asphalt (HMA) mixtures10.1016/j.conbuildmat.2018.03.151 ↗
9. Foundry Sand Facts for Civil Engineers, (2004) May, U.S Department of Transportation, Federal Highway Administration, First Printing. FHWA-IF-04-004.
10. Recycled waste foundry sand as a sustainable subgrade fill and pipe-bedding construction material: engineering and environmental evaluation10.1016/j.scs.2016.10.009 ↗
11. Waste foundry sand as a replacement for fine aggregate in high strength solid masonry blocks
12. Self-Consolidating Concrete, ACI (2007) Emerging Technology Series Committee ACI 237R-07.
13. Durability of self-compacting concrete made with Recycled Concrete Aggregates and mineral admixtures10.1016/j.conbuildmat.2016.10.026 ↗
14. Use of foundry silica-dust in manufacturing economical self-consolidating concrete Foundry Dust10.1016/j.conbuildmat.2009.06.006 ↗
15. Use of spent foundry sand and fly ash for the development of green self-consolidating concrete10.1617/s11527-010-9692-7 ↗
16. Effects of elevated temperatures on properties of self-compacting-concrete containing fly ash and spent foundry sand10.1016/j.conbuildmat.2012.02.026 ↗
17. A study on compressive strength of self- compacting concrete using portland slag cement with partial replacement of fine aggregate by foundry sand
18. BIS:8112:1989 Indian Standard 43 Grade Ordinary Portland Cement - Specification, (First Revision).
19. ASTM C807 − 18 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle , ASTM International, West Conshohocken, USA doi:10.1520/C0807-18.10.1520/C0807-18 ↗
20. BIS: 383:1970 (Reaafirmed 1997) Indian standard specification for coarse and fine aggregates from natural sources for concrete (Second Revision).
21. ASTM C33/C33M − 18 Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, USA. doi: 10.1520/C0033_C0033M-18.10.1520/C0033_C0033M-18 ↗
22. The European Guidelines for Self-Compacting Concrete, Specification, Production and Use. EFNARC (2005). doi: 0 9539733 4 4.
23. ASTM C1610/C160M-17 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique , ASTM International, West Conshohocken, USA. doi: 10.1520/C1610_C1610M-17.10.1520/C1610_C1610M-17 ↗
24. ASTM C1611/C1611M-18 Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM International, West Conshohocken, USA. doi:10.1520/C1611_C1611M-18.10.1520/C1611_C1611M-18 ↗
25. ASTM C1621/C1621M-17 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring , ASTM International, West Conshohocken, USA .doi:10.1520/C1621_C1621M-17.10.1520/C1621_C1621M-17 ↗
26. ASTM C1617-17 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test, ASTM International, West Conshohocken, USA .doi:10.1520/C1712-17.10.1520/C1712-17 ↗
27. BIS: 516:1959 (Reaffirmed 1999) Indian Standard Methods of Tests for Strength for Strength of Concrete (Incorporating Amendment Nos 1&2). Edition 1.2 (1991-07)
28. ASTM C39/C39M-18 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, USA. doi: 10.1520/C0039_C0039M-18.10.1520/C0039_C0039M-18 ↗
29. BIS: 5816:1999 (Reaffirmed 2004) Indian Standard Method of Test for Splitting Tensile Strength of Concrete, First Revision.
30. ASTM C496/C496M-17 · 2017
31. Effects of foundry sand as a fine aggregate in concrete production10.1016/j.conbuildmat.2014.07.070 ↗
32. Mechanical and durability properties of concrete made with used foundry sand as fine aggregate
33. Micro and mechanical behaviour of Treated Used Foundry Sand concrete10.1016/j.conbuildmat.2016.06.143 ↗
34. Effect of foundry waste on the mechanical properties of Portland Cement Concrete10.1016/j.conbuildmat.2017.01.028 ↗
35. Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS)10.1016/j.conbuildmat.2010.11.065 ↗
36. Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete10.1016/j.conbuildmat.2011.06.041 ↗
37. The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete10.1016/j.conbuildmat.2012.04.078 ↗
38. Effect of used-foundry sand on the mechanical properties of concrete10.1016/j.conbuildmat.2008.05.005 ↗
39. Effect of metakaolin and foundry sand on the near surface characteristics of concrete10.1016/j.conbuildmat.2011.03.012 ↗
40. Foundry sand utilisation in concrete production
41. Mechanical and durability related properties of high performance concrete made with coal cinder and waste foundry sand10.1016/j.conbuildmat.2016.05.148 ↗
42. Evaluation of ratio between splitting tensile strength and compressive strength for concretes up to 120 MPa and its application in strength criterion