Effect of clay in alternative fine aggregates on performance of concrete
Source abstract
Abstract
Abstract The worldwide utilization of alternative fine aggregates (AFA) in the construction sector is increasing exponentially these days due to extensive exploitation of natural sand. However, presence of excessive clay in AFA is considered harmful for fabrication of concrete and mortar. The existence of fine sediments like clay at the interstices of AFA highly influence the performances of concrete. Three types of AFA such as crushed rock sand (CRS), coal bottom ash (CBA) and recycle fine aggregates (RFA) are used in present study. Keeping in view, assessment of clay content in AFA is carried out by methylene blue test and their effects on performance of concrete. In this study, the volume fraction of AFA is varied by 30%, 50%, 75% and 100% respectively. Efforts were also made to develop standard correlation curve of methylene blue value of fine aggregates to corresponding clay content. The methylene blue value for all fine aggregates were well within 6 mg/g and correspondingly less than 5% clay content. Results indicated that MBV greater than or equal to 1.50 is not suitable for preparing concrete. It is also observed that properties and durability of these AFA concrete depend on the amounts of clay.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Agenda for use of alternative sands in India
2. A framework for use of construction and demolition waste as recycled aggregate in India
3. Fresh and hardened properties of self-compacting concrete produced with manufactured sand10.1016/j.cemconcomp.2010.11.005 ↗
4. Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete – a review10.1016/j.ijsbe.2016.04.006 ↗
5. Concrete with fine recycled aggregates: a review10.1080/19648189.2013.851038 ↗
6. Characterisation of crushed fine aggregate for use in concrete based on methylene blue test
7. Suitability of the methylene blue test for surface area, cation exchange capacity and swell potential determination of clayey soils10.1016/j.enggeo.2008.07.002 ↗
8. Identification of clay minerals in mixtures subjected to differential thermal and thermogravimetry analyses and methylene blue adsorption tests10.1016/j.clay.2015.05.020 ↗
9. Application of the modified methylene blue test to detect clay minerals in coarse aggregate fines
10. Specific surface: determination and relevance10.1139/t01-077 ↗
11. Improvement to the methylene blue dye test for harmful clay in aggregates for concrete and mortar10.1016/S0008-8846(98)00114-8 ↗
12. Effect of the methylene blue value of manufactured sand on performances of concrete10.3151/jact.9.127 ↗
13. IS: 383 · 2016
14. IS: 269 · 2015
15. IS 4031, Part 2–8 · 1988
16. IS: 9103 · 1999
17. ASTM C33 · 2018
18. T.M. Cleland, 1921. A practical description of the Munsell color system, with suggestions for its use. Boston: Munsell Color Company. An edited version can be found at http://www.applepainter.com/.
19. The Munsell color system: a scientific compromise from the world of art10.1016/j.shpsa.2014.03.004 ↗
20. M. Color, Munsell Soil Color Charts, Munsell Soil Color Charts. 2009. https://www.southsuburbanairport.com/Environmental/pdf2/Part4-References/Reference16 MunsellColorCharts/MunsellColorChart.pdf.
21. Soil colour: its measurement and its designation in models of uniform colour space10.1111/j.1365-2389.1985.tb00353.x ↗
22. IS: 2386, Part I-VII · 1963
23. ISSA TB No. 145. 1989. Test method for determination of methylene blue adsorption value (MBV) of mineral aggregates fillers and fines. February 1989. 1st Revision 2005, USA.
24. AASHTO T 330 · 2015
25. AS 1141.66. 2012. Australian standard methods for sampling and testing aggregates Method 66: methylene blue adsorption value of fine aggregate and mineral fillers.
26. EN 933-09. 2009. Test for geometrical properties of aggregates Part 9: Assessment of fines-methylene blue test.
27. Determination of cation exchange capacity of clayey soils by methylene blue test10.1520/GTJ10291J ↗
28. Rapid estimation of cation exchange capacities of soils and clays with methylene blue exchange10.2136/sssaj1996.03615995006000010022x ↗
29. IS 650 · 1991
30. IS: 1199 · 1999
31. IS: 516 · 1959
32. ASTM C596 · 2018
33. ASTM C1202 · 2019
34. Practical evaluation of resistivity of concrete in test cylinders using a Wenner array probe10.1016/S0008-8846(96)00175-5 ↗
35. Effect of limestone fines content in manufactured sand on durability of low- and high-strength concretes10.1016/j.conbuildmat.2009.02.033 ↗
36. An investigation into the use of manufactured sand as a 100% replacement for fine aggregate in concrete10.3390/ma9060440 ↗
37. Comparison of methods for determining specific surface area of soils10.1061/(ASCE)1090-0241(2006)132:7(931) ↗
38. Methylene blue absorption by clay minerals. Determination of surface areas and cation exchange capacities (clay-organic studies XVIII)10.1346/CCMN.1970.0180404 ↗
39. ASTM D5890 · 2018
40. Properties of concrete prepared with crushed fine stone, furnace bottom ash and fine recycled aggregate as fine aggregates10.1016/j.conbuildmat.2009.02.009 ↗
41. Influence of MB-value of manufactured sand on the shrinkage and cracking of high strength concrete10.1007/s11595-009-2321-z ↗
42. Specific surface area of aggregate and its relation to concrete drying shrinkage10.1617/s11527-007-9245-x ↗
43. Stanish · 1997
44. Raman spectroscopic investigation of Friedel’s salt10.1016/j.cemconcomp.2017.11.023 ↗
45. Synergic effect of Friedel’s salt from pozzolan and from OPC co-precipitating in a chloride solution10.1016/j.conbuildmat.2011.12.040 ↗
46. Formation of Friedel’s salt using steel slag and potash mine brine water10.1016/j.conbuildmat.2019.05.195 ↗
47. An experimental study on properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete10.1016/S0008-8846(00)00250-7 ↗