journal article·2020-01

Mechanical properties of the concrete containing ferronickel slag and blast furnace slag powder

Ai Qi, Xuhong Liu, Ziwei Wang, Zixuan Chen

Publisher page

Abstract

Abstract This study investigated the mechanical properties of concrete of strength grade C30 and C35, containing different content (10%–50%) of a composite admixture of ferronickel slag and blast furnace slag powder (referred to as F-S powder and F-S concrete hereafter, respectively). The mechanical properties include axial compressive strength, elastic modulus, Poisson’s ratio, splitting tensile strength, and the compressive stress-strain relationship. The difference in mechanical properties between F-S concrete and conventional concrete was analyzed. Test results indicated that the positive correlation of conventional concrete between the axial compressive strength, elastic modulus, splitting tensile strength, and cubic compressive strength was applicable to F-S concrete irresponsible of the specific F-S powder content. Both Poisson’s ratio and the failure mode under compression for F-S concrete were identical to those of conventional concrete. The shape characteristics and fitting parameters of the stress-strain curve were mainly related to F-S concrete strength grade but had little connection with the specific F-S powder content. Furthermore, based on tested data, the stress-strain constitutive equations were established for F-S concrete, which provides a reference for the test analysis of large specimens and corresponding engineering application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Materials Engineering and Processing · Advanced ceramic materials synthesis · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Characteristics and reactivity of ferronickel slag powder10.1016/j.conbuildmat.2017.09.038 ↗
2. Value added utilization of by-product electric furnace ferronickel slag as construction materials: a review10.1016/j.resconrec.2018.02.034 ↗
3. Constraints and opportunities for the recycling of growing ferronickel slag in China10.1016/j.resconrec.2018.08.002 ↗
4. Sorptivity and chloride permeability of concrete using ferronickel slag as fine aggregate
5. Durability characteristics of concrete using ferronickel slag fine aggregate and fly ash10.1680/jmacr.17.00260 ↗
6. Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS)10.1016/j.conbuildmat.2011.08.087 ↗
7. Influence of activated fly ash on corrosion-resistance and strength of concrete10.1016/S0958-9465(02)00068-9 ↗
8. Influence of ferronickel slag used as admixture on cement properties
9. Utilization of ferronickel slag as additive in Portland cement: a hydration leaching study10.1007/s12649-015-9346-7 ↗
10. The application of ferronickel compound admixture in concrete
11. Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag10.1016/j.conbuildmat.2017.02.023 ↗
12. Feasibility of ferronickel slag powder for cementitious binder in concrete mix10.1016/j.conbuildmat.2019.02.166 ↗
13. Mitigation of the potential alkali-silica reaction of ferronickel slag (FNS) aggregate by using ground FNS as a supplementary cementitious material
14. Production of high-strength concrete using high volume of industrial by-products10.1016/j.conbuildmat.2010.01.016 ↗
15. Chinese Standard · 2011
16. Chinese Standard · 2010
17. Chinese Standard · 2003
18. Guo · 2014 · 590
19. Effect of temperature and aging on the mechanical properties of concrete: Part I. Experimental results10.1016/S0008-8846(02)00744-5 ↗
20. Basic mechanical properties test and stress-strain constitutive relations of recycled coarse aggregate concrete