journal article·2020-02

Laboratory evaluation of dynamic performance and viscosity improvement in modified bitumen by combining nanomaterials and polymer

Mehrnaz Mirsepahi, Javad Tanzadeh, Seyed Alireza Ghanoon

Publisher page

Abstract

Abstract One of the most common forms of failure in pavement performance is rutting. Bitumen can play a decisive role as one of the main materials used in asphalt mixtures, and modifying the properties of bitumen can greatly delay these failures and minimizing them in some cases. The current study aimed at modifying polymer bitumen with a combination of nano-clay and nano-lime. The PG 58-16 bitumen was modified by nano-clay and nano-lime. In this study we have 3 samples with different percentages of nano materials. The effect of this modifier on reducing rutting failure was evaluated compared to the control sample. Our control sample is modified bitumen with 3% weight percentage of Styrene-Butadiene-Styrene (SBS). The Rotational Viscometer (RV) tests were performed to determine the viscosity parameter. At a constant temperature, the addition of nanomaterials to the polymer bitumen increased the viscosity and the stiffness of bitumen was accordingly modified. The rutting parameters including non-recoverable creep compliance (Jnr) and the recovered creep (R%) were also evaluated, and then the effect of nano-silica on the improvement of these parameters at high temperatures was evaluated by simulating dynamic loading using Dynamic Shear Rheometer (DSR) and performing the MSCR test at 3 temperatures of 58, 64 and 70 °C. Also, the effect of nano-clay and nano-lime hybrid on rutting parameters was evaluated in two nonlinear and linear viscoelastic states. The results showed that the addition of modifiers to polymer bitumen, due to the increase in viscosity, resulted in stiffness of the bitumen and improvement of the rutting parameters at zero shear viscosity (ZSV). In all three experiments, the effect of nano-lime was significantly higher than that of nano-clay on increased resistance to rutting in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. W.R. Vavrik, G. Huber, W. Pine, Bailey method for gradation selection in HMA mixture design, Transportation Research Board: Transportation Research Circular Number E-C044, Washington, D.C., 2002. http://onlinepubs.trb.org/onlinepubs/circulars/ec044.pdf
2. Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples10.1016/j.conbuildmat.2010.07.010 ↗
3. Kim · 2006
4. Nicholls · 1998 · 68
5. Laboratory evaluation of nano-silica modification on rutting resistance of asphalt Binder10.1016/j.conbuildmat.2019.07.295 ↗
6. Effect of styrene-butadiene-styrene on the properties of asphalt and stone-matrix-asphalt mixture10.1061/(ASCE)MT.1943-5533.0000185 ↗
7. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test10.1016/j.conbuildmat.2009.02.015 ↗
8. Laboratory evaluation of SMA mixes prepared with SBS modified and neat bitumen10.1016/j.sbspro.2013.11.098 ↗
9. Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens10.1016/S0950-0618(96)00033-5 ↗
10. Asphalt modified by styrene-butadiene-styrene triblock copolymer: morphology and model10.1061/(ASCE)0899-1561(2002)14:3(224) ↗
11. Rheological properties of asphalt binders modified with styrene butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.06.115 ↗
12. Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures10.1177/0361198105190100105 ↗
13. A. Behnood, A. Shah, R.S. McDaniel, J. Olek, Analysis of the multiple stress creep recovery asphalt binder test and specifications for use in Indiana, Joint Transportation Research Program Publication No. FHWA/IN/JTRP-2016/07, West Lafayette, IN: Purdue University, 2016. Available from: https://doi.org/10.5703/1288284316330.10.5703/1288284316330 ↗
14. Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt10.1016/j.conbuildmat.2011.03.005 ↗
15. High temperature properties of asphalt binders: statistical and experimental comparison of MSCR and PG grading systems10.3141/2574-15 ↗
16. Effects of nanoclay on rheological properties of bitumen binder10.1016/j.conbuildmat.2009.02.027 ↗
17. Nanoclay for binder modification of asphalt mixtures10.1201/9780203092989.ch14 ↗
18. Nanoclay-modified asphalt materials: preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
19. Effect of organic montmorillonite nanoclay concentration on the physical and rheological properties of asphalt binder
20. Effect of short term aging on organic montmorillonite nanoclay modified asphalt
21. Evaluation of mechanical properties of nano-clay modified asphalt mixtures
22. A.H. Khalil Albayati, Mohammed Alani, Laboratory investigation in the hydrated lime effect on asphalt concrete mixture, The First National Conference for Engineering Sciences FNCES, 2012. 10.1109/NCES.2012.6740465.10.1109/NCES.2012.6740465 ↗
23. Using hydrated lime in hot mix asphalt mixtures in road construction
24. A rheological evaluation of foamed WMA modified with nano hydrated lime10.1016/j.sbspro.2013.08.318 ↗
25. ASTM D113-07, Standard Test Method for Ductility of Bituminous Materials (Withdrawn 2016), ASTM International, West Conshohocken, PA, 2007.
26. ASTM D36/D36M-14e1, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), ASTM International, West Conshohocken, PA, 2014.
27. ASTM D5/D5M-13, Standard Test Method for Penetration of Bituminous Materials, ASTM International, West Conshohocken, PA, 2013.
28. ASTM D92-16a, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester, ASTM International, West Conshohocken, PA, 2016.
29. ASTM D70-03, Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials, PA, 2016.
30. ASTM C1738/C1738M-18, Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes, ASTM International, West Conshohocken, PA, 2018.
31. AASHTO T 316. Viscosity determination of asphalt binder using rotational viscometer. Washington, standard by American Association of State and Highway Transportation Officials, 2019.
32. Short-term aging characterization of asphalt binders using gel permeation chromatography and selected Superpave binder tests10.1016/j.conbuildmat.2007.08.005 ↗
33. AASHTO T350-14 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)-2018.
34. ASTM D7405-15, Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer, ASTM International, West Conshohocken, PA, 2015.
35. Multiple stress creep recovery (MSCR) characterization of polymer modified asphalt binder containing wax additives10.1016/j.ijprt.2018.05.001 ↗
36. Influence of microstructural behavior on multiple stress creep recovery (MSCR) in modified bitumen10.1016/j.proeng.2015.07.119 ↗
37. Relationship between multiple stress creep recovery (MSCR) binder test results and asphalt concrete rutting resistance in Brazilian roadways10.1016/j.conbuildmat.2017.03.216 ↗
38. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test
39. Zero shear viscosity of asphalt binders
40. Non linearity of reapeted creep and recovery test and the relationship with mixture permanent
41. Development of binder specification parameters based on characterization of damage behavior
42. K. Stuart, Understanding the performance of modified asphalt binders in mixture: high temperature characterization, 2002. Report FHWA-RD- 02-075.
43. R. Dongré, J.A. D’Angelo, Evaluation of different parameters for superpave high temperature binder specification based on rutting performance in ALF at FHWA. Transport research board annual meet, 2003.10.3141/1829-06 ↗
44. R.Y. Hu, H.U. Bahia, H. Zhai, M. Zeng, Measuring resistance of asphalt binders to permanent deformation using the DSR device. Transport research board 80th annual meet, 2001.