journal article·2015-10Open access

Seismic strengthening and seismic improvement of timber structures

Maria Adelaide Parisi, Maurizio Piazza

Abstract

Abstract In European seismic areas timber structures are found as building frames, in combination with masonry infills, in bridges, but most frequently in roof structures and floor slabs of traditional buildings. Seismic strengthening of existing structures should provide a well-defined and simple path to seismic forces, maintain timber members elastic, and develop as much as possible the post-elastic behaviour of joints. Provisions must be adopted to avoid sudden loss of capacity and brittle failure, and to foster ductility. Different criteria for seismic strengthening of floor slabs and of carpentry joints are presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Civil and Structural Engineering Research · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. D.M. 14.01.2008, Nuove norme tecniche per le costruzioni, G.U. 4.02.2008, n.29, Ministero delle Infrastrutture, dell’Interno e Dipartimento Protezione Civile, Roma, 2008.
2. Tsakanika E. The constructional analysis of timber load bearing systems as a tool for interpreting Aegean Bronze Age Architecture. In: Proceedings of conference on bronze age architectural traditions in the eastern mediterranean: diffusion and diversity, Munich, Germany, 2008, p. 127–139.
3. Monteiro M, Lopes R, Bento R. Dynamic behaviour of a Pombalino quarter. In: Proceedings of conference for the 250th anniversary of the 1755 Lisbon earthquake, Lisbon, 2005.
4. Typical failures, seismic behaviour and safety of the “bourbon system” with timber framing10.4028/www.scientific.net/AMR.778.58 ↗
5. Seismic behaviour of the historical system of the island of Lefkada, Greece10.1016/j.conbuildmat.2005.04.002 ↗
6. Effect of timber ties on the behavior of historic masonry10.1061/(ASCE)0733-9445(2008)134:6(961) ↗
7. Gülkan P, Langenbach R. The earthquake resistance of traditional timber and masonry dwellings in Turkey. In: Proceedings of 13th world conference on earthquake engineering, Vancouver, Canada, 2004.
8. Seismic behaviour and retrofitting of timber frame walls10.4028/www.scientific.net/AMR.778.706 ↗
9. Traditional timber construction in Turkey
10. Wooden-columned mosques in Anatolia
11. Prinkipo palace
12. DPCM 26.02.2011, Linee Guida per la valutazione e riduzione del rischio sismico del patrimonio culturale con riferimento alle norme tecniche per le costruzioni, (Guidelines for risk evaluation and reduction of the cultural heritage, in Italian, by the Ministry of Cultural Heritage, MiBACT), G.U. 26.02. 2011 n.47, Roma, 2011.
13. EN 1998-1, Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings, CEN, European Committee for Standardization, 2004, Brussels, Belgium.
14. EN 1995-1, Eurocode 5: Design of timber structures. Part 1–1: General rules and rules for the buildings, CEN, European Committee for Standardization, 2005, Brussels, Belgium.
15. UNI 11138, Cultural heritage – Wooden artefacts – Building load bearing structures – Criteria for the preliminary evaluation, the design and the execution of works, UNI, (English version: 2004), Milano.
16. Guidelines for the on-site assessment of historic timber structures
17. Inferring seismic behaviour from morphology in timber roofs10.1080/15583058.2010.511693 ↗
18. Restoration and strengthening of timber structures: principles, criteria, and examples10.1061/(ASCE)1084-0680(2007)12:4(177) ↗
19. Wooden roof box structure for the anti-seismic strengthening of historic buildings10.1080/15583050802063733 ↗
20. Giongo I, Piazza M, Tomasi R. Out of plane refurbishment techniques of existing timber floors by means of timber to timber composites structures. In: Proceedings of 12th world conference on timber engineering, Session 45, Auckland, New Zealand, 2012, p. 544–550.
21. Cambering of timber composite beams by means of screw fasteners
22. Piazza M. Restoration of timber floors via a composite timber-timber solution. In: Proceedings of the technical workshop RILEM timber: a structural material from the past to the future, Trento, 1994, p. 167–187.
23. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
24. Piazza M, Polastri A, Tomasi R. Ductility of timber joints under static and cyclic loads. In: Proceedings of the institution of civil engineers. structures and buildings, vol. 164, No. SB2, 2011, p. 79–90.10.1680/stbu.10.00017 ↗
25. Investigation on the self-tapping screws capability to induce internal stress in timber elements10.4028/www.scientific.net/AMR.778.604 ↗
26. Piazza M, Baldessari C, Tomasi R. The role of in-plane floor stiffness in the seismic behaviour of traditional buildings. In: Proceedings of the 14th world conference on earthquake engineering, Beijing, 2008.
27. Experimental parametric study on the in-plane stiffness of wood diaphragms10.1139/l02-036 ↗
28. Seismic testing of repaired unreinforced masonry building having flexible diaphragm10.1061/(ASCE)0733-9445(2004)130:10(1487) ↗
29. Experimental behaviour of stud connected wooden floors undergoing seismic action10.1515/rbm-2005-5924 ↗
30. In-plane shear reinforcement of wood beam floors with FRP10.1016/j.compositesb.2005.11.003 ↗
31. The refurbishment of existing timber floors: characterization of the in-plane behaviour
32. Experimental evaluation of the in-plane stiffness of timber diaphragms10.1193/1.4000088 ↗
33. In-plane assessment of existing timber diaphragms in URM buildings via quasi-static and dynamic in-situ tests10.4028/www.scientific.net/AMR.778.495 ↗
34. In-plane orthotropic behavior of timber floor diaphragms in unreinforced masonry buildings10.1061/(ASCE)ST.1943-541X.0000819 ↗
35. Giongo I, Piazza M, Tomasi R. Pushover analysis of traditional masonry buildings: influence of refurbished timber-floors stiffness. Paper no. 51. In: Proceedings of SHATIS’11 intl conference on structural health assessment of timber structures, Lisbon, Portugal, 2011.
36. Giongo I, Piazza M, Rizzardi A, Rodegher C, Tomasi R. Seismic evaluation of URM buildings with flexible diaphragms. Proposal of a simplified ‘ENT’ method. Paper no. 2629. In: Proceedings of 15th world conference on earthquake engineering, Lisbon, Portugal, 2012.
37. Piazza M, Parisi MA, Rehabilitation of timber structures by new materials and connectors. In: Proceedings of 10th conf. “Structural faults & repair 2003 – extending the life of bridges, concrete & composites, buildings, masonry & civil structures”, Commonwealth Institute, London, 2003.
38. Rehabilitation of timber structures – preparation and environmental service condition effects on the bulk performance of epoxy adhesives10.1016/j.conbuildmat.2011.03.050 ↗
39. Rehabilitation of timber structures – novel test method to assess the performance and durability of bonded-in rod connections10.1617/s11527-011-9760-7 ↗
40. A method for flexural reinforcement of old wood beams with CFRP materials10.1016/j.compositesb.2004.04.013 ↗
41. Mechanics of plain and retrofitted traditional timber connections10.1061/(ASCE)0733-9445(2000)126:12(1395) ↗
42. Seismic behavior and retrofitting of joints in traditional timber roof structures10.1016/S0267-7261(02)00146-X ↗
43. Parisi MA, Piazza M. Seismic strengthening of traditional carpentry joints. In: Proceedings of the 14th world conference on earthquake engineering, Beijing, 2008.
44. Carpentry joints in earthquake conditions
45. Palma P, Cruz H. Mechanical behaviour of traditional timber carpentry joints in service conditions – results of monotonic tests. In: Proceedings of the XVI international ICOMOS IWC symposium “From material to structure – mechanical behaviour and failures of the timber structures”, Venice, Italy, 2007.
46. Experimental evaluation of different strengthening techniques of traditional timber connections10.1016/j.engstruct.2011.04.002 ↗
47. Behaviour and repair of carpentry connections – rotational behaviour of the rafter and tie beam connection in timber roof structures10.1016/j.culher.2012.03.002 ↗
48. Descamps T, Lambion J, Laplume D. Timber structures: rotational stiffness of carpentry joints. In: Proceedings of 9th world conference on timber engineering, Portland, USA, 2006.
49. Semi-rigid analysis of old timber frames: definition of equivalent springs for joints modeling. Enhancement of the method, numerical and experimental validation
50. Behavior and modeling of wood-pegged timber frames10.1061/(ASCE)0733-9445(1999)125:1(3) ↗
51. Static and cyclic behavior of wooden frames with tenon joints under lateral load10.1061/(ASCE)0733-9445(1999)125:3(344) ↗
52. Analysis of the stress state at the cogging joint in timber structures10.1016/j.biosystemseng.2006.09.009 ↗
53. Experimental and numerical analysis of a halved and tabled traditional timber scarf joint10.1016/j.conbuildmat.2008.01.015 ↗
54. Experimental and numerical analysis of a stop-splayed traditional timber scarf joint with key10.1016/j.conbuildmat.2007.11.004 ↗
55. Mechanical behavior of double-step timber joints10.1016/j.conbuildmat.2010.01.001 ↗
56. Testing and modeling of a traditional timber mortise and tenon joint10.1617/s11527-013-0056-y ↗
57. Branco J, Descamps T. Analysis and strengthening of carpentry joints, in State of the art report on reinforcement of timber structures, COST Action FP1101, 2014.
58. Joint characteristics of traditional Chinese wooden frames10.1016/0141-0296(96)00203-9 ↗
59. Experimental study and finite element modelling of Japanese Nuki joints – Part 1: initial stress state subject to different wedge configurations10.1016/j.engstruct.2008.01.003 ↗
60. Experimental study and finite element modelling of Japanese Nuki joints – Part 2: racking resistance subject to different wedge configurations10.1016/j.engstruct.2008.01.004 ↗
61. Example of Traditional Tall Timber buildings in China – the Yingxian Pagoda10.2749/101686608784218743 ↗
62. Parisi MA, Piazza M. Seismic evaluation and strengthening of timber structures in traditional buildings. In: Proceedings of intl. conference “250th Anniversary of the Lisbon earthquake”, Lisbon, 2005, p 451–457.
63. Comparison of in-situ and laboratory testing for the characterization of old timber beams before and after intervention10.4028/www.scientific.net/AMR.133-134.1101 ↗
64. Riggio M, Sandak J, Sandak A, Piazza M. Coupling local semi-destructive techniques and non-destructive imaging for the characterization of traditional timber structures: a case study. In: Proceedings of 5th international congress “Science and Technology for the Safeguard of Cultural Heritage in the Mediterranean Basin”, Vol. II, Istanbul, Turkey, 2011, p. 8–13.
65. Refurbishment of a traditional timber floor with a reversible technique: importance of the investigation campaign for design and control of the intervention10.1080/15583058.2012.670364 ↗
66. Parisi MA, Piazza M, Chesi C. Seismic response of traditional timber elements and roof structures: learning from the L’Aquila earthquake. Paper no. 64. In: Proceedings of SHATIS’11 intl conference on structural health assessment of timber structures, Lisbon, Portugal, 2011.