journal article·2014-01

Effect of phosphate based inhibitor on the threshold chloride to initiate steel corrosion in saturated hydroxide solution

H. Nahali, L. Dhouibi, H. Idrissi

Publisher page

Abstract

In this paper, a phosphate-based inhibitor was used to increase the well-known critical ratio [Cl-]/[OH-] (R), inducing the localized corrosion of steel reinforcements in saturated Ca(OH)2 solution. For this purpose, electrochemical measurements and characterization methods (SEM, EDS, XRD, etc.) were first employed to identify the phosphate layer formation, and then to evaluate the inhibition effectiveness for the localized corrosion of steel reinforcements. The process of pitting corrosion is evaluated by cyclic polarization and is followed by acoustic emission. The experimental results show that electrochemical techniques can evaluate the pitting corrosion and reveal that the introduction of phosphate-based inhibitor increases strongly the critical ratio [Cl-]/[OH-] from which the depassivation and pitting corrosion can be initiated. This clearly confirms its positive effect on the localized corrosion resistance of steel reinforcements in saturated Ca(OH)2 solution. A perfect correlation with the evolution of the acoustic activity is also demonstrated. Thus, it was significantly possible to highlight the acoustic signature of depassivation damage and to chloride concentration. © 2013 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar10.1016/S0008-8846(00)00265-9 ↗
2. Influence of chloride salt type on threshold level of reinforcement corrosion in simulated concrete pore solutions10.1016/j.conbuildmat.2011.12.044 ↗
3. Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete10.1016/j.conbuildmat.2010.07.023 ↗
4. Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site10.1016/j.conbuildmat.2012.07.061 ↗
5. A study on chloride-induced depassivation of mild steel in simulated concrete pore solution10.1016/S0008-8846(02)00895-5 ↗
6. Inhibition of chloride localized corrosion of mild steel by PO43-,CrO42-,MoO42-, and NO2- anions10.1016/S0169-4332(00)00016-7 ↗
7. Studies on corrosion inhibition of steel reinforcement by phosphate and nitrite10.1007/BF02480830 ↗
8. Effect of inhibitor treatment on corrosion of steel in a salt solution
9. Corrosion behavior in alkaline medium of zinc phosphate coated steel obtained by cathodic electrochemical treatment10.1016/j.corsci.2009.01.010 ↗
10. Corrosion inhibition of steel in chloride-containing alkaline solutions10.1023/A:1016507713022 ↗
11. Corrosion inhibition of carbon steel in alkaline chloride media by Na3PO410.1016/j.electacta.2007.03.003 ↗
12. Corrosion protection investigation of reinforcement by inorganic coating in the presence of alkanolamine-based inhibitor10.1016/S0958-9465(02)00061-6 ↗
13. Performance evaluation of potassium dichromate and potassium chromate inhibitors on concrete steel rebar corrosion10.1007/s11668-010-9375-2 ↗
14. Environmental factors affecting the corrosion behavior of reinforcing steel II. Role of some anions in the initiation and inhibition of pitting corrosion of steel in Ca(OH)2 solutions10.1016/j.corsci.2009.09.004 ↗
15. An electrochemical and analytical approach to the inhibition mechanism of an amino-alcohol-based corrosion inhibitor for reinforced concrete10.1016/S0013-4686(03)00472-9 ↗
16. Hydrogen embrittlement of prestressing cables10.1016/j.corsci.2010.02.041 ↗
17. Non-destructive characterization of hydrogen-embrittlement craking by acoustic10.1016/0013-7944(71)90021-X ↗
18. The correlation of acoustic emission with rate of corrosion10.1016/0010-938X(93)90042-F ↗
19. Lorin G. La phosphatation des métaux. Editions Eyrolles. Paris; 1973.
20. Characterisation of steel/concrete interface by electrochemical impedance spectroscopy10.1179/000705994798267917 ↗
21. Detection and identification of concrete cracking during corrosion of reinforced concrete by acoustic emission coupled to the electrochemical techniques10.1016/j.ndteint.2005.04.007 ↗
22. Detection of stress corrosion cracking of high-strength steel used in prestressed concrete structures by acoustic emission technique10.1016/j.apsusc.2007.09.011 ↗