journal article·2014-10

Complete triaxial stress–strain curves for geopolymer

Giasuddin M. Haider, J.G. Sanjayan, P.G. Ranjith

Publisher page

Abstract

Abstract Geopolymer is an emerging alternative to Portland cement and is made from fly ash – a waste stream from coal power stations. As a relatively new material, many mechanical properties of geopolymer are still unexplored. In this paper, the stress–strain characteristics of geopolymer under various levels of confining stresses have been studied. Based on triaxial laboratory tests, the relationships between axial-stress and axial-strain, as well as lateral-strain under active lateral confinement, have been developed for high- and low-strength geopolymers (85 MPa and 28 MPa). Tests were performed under a range of confining pressures from 0 to 35 MPa. Based on this work, a constitutive model describing the complete stress–strain behaviour of geopolymer is proposed. The model developed for the constitutive behaviour of geopolymer has many similarities to Portland cement binder; however, differences do exist namely in the form of increased stiffness or reduced ductility in geopolymer compared to Portland cement binder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. High-strength concrete subjected to triaxial compression
2. Resistance of geopolymer materials to acid attack10.1016/j.cemconres.2004.06.005 ↗
3. Resistance of alkali-activated slag concrete to acid attack10.1016/S0008-8846(03)00125-X ↗
4. An analytical model for stress–strain behavior of confined concrete10.1016/j.engstruct.2005.03.002 ↗
5. Complete triaxial stress–strain curves of high-strength concrete10.1061/(ASCE)0899-1561(2001)13:3(209) ↗
6. Stress–strain model for confined high-strength concrete10.1061/(ASCE)0733-9445(1995)121:3(468) ↗
7. Strength of geopolymer cured in saline water in ambient conditions10.1016/j.fuel.2013.01.035 ↗
8. Complete stress–strain behaviour of high-strength concrete under compression10.1680/macr.1994.46.169.301 ↗
9. Damage behavior of geopolymer composites exposed to elevated temperatures10.1016/j.cemconcomp.2008.08.001 ↗
10. Stress–strain model for laterally confined concrete10.1061/(ASCE)0899-1561(2005)17:6(607) ↗
11. Triaxial failure criterion for concrete and its generalization
12. Compression field modeling of confined concrete: constitutive models10.1061/(ASCE)0899-1561(2006)18:4(510) ↗
13. Constitutive model for short-time loading of concrete10.1061/JMCEA3.0002446 ↗
14. Confinement-sensitive plasticity constitutive model for concrete in triaxial compression10.1016/j.ijsolstr.2007.03.022 ↗
15. A numerical approach to the complete stress–strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
16. A stress–strain model for uniaxial and confined concrete under compression10.1016/j.engstruct.2012.03.027 ↗
17. Effects of lateral reinforcement upon the strength and deformation properties of concrete10.1680/macr.1971.23.76.99 ↗
18. Behavior and modeling of confined high-strength concrete10.1061/(ASCE)CC.1943-5614.0000070 ↗
19. Zhang · 1994