journal article·2012-01

Cement-bonded composite boards made from poplar strands

Alireza Ashori, Taghi Tabarsa, Sima Sepahvand

Publisher page

Abstract

Abstract This study was carried out to explore the possibility of making cement-bonded wood composite building products using poplar ( Populus deltoides ) chopped strands. The experimental design consisted of two treatments namely wood strand and calcium chloride contents. Boards measuring 450 × 450 × 15 mm 3 were manufactured using wood/cement ratios of 40:60, 60:40 and 70:30 by weight and 3% and 7% of an accelerator (CaCl 2 ⋅H 2 O). At least four replications were fabricated for each treatment, and the mechanical properties and water absorption of the boards were evaluated according to DIN 68763. The mechanical properties in terms of modulus of rupture, modulus of elasticity, internal bond and impact strength were investigated and compared to the neat cement controls. Test results showed that addition of CaCl 2 tends to enhance both the mechanical and water-resistance of wood–cement composites. The bending and impact strengths of the wood–cement specimens increased with an increase in the wood content, and the maximum values were obtained at wood loading of 60% by weight. The negative influence of wood content on the internal bond can be explained by the reduced bonding ability because of weaker wood strands compared to cement. Water absorption and internal bonding were inversely proportional to the increase of cement mixture ratio, and their values increased proportional to the increase of wood ratio in the mixture. In addition, all properties of the boards were improved when the CaCl 2 content was increased from 3% to 7%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Effects of husk particle size and calcium chloride on strength and sorption properties of coconut husk–cement composites10.1016/j.indcrop.2008.09.009 ↗
2. Comparing flexural behaviour of fibre–cement composites reinforced bagasse: wheat and eucalyptus10.1016/j.conbuildmat.2011.03.052 ↗
3. Cement-bonded wood particleboard with a mixture of eucalypt and rubberwood10.1016/S0958-9465(03)00061-1 ↗
4. Wood–wool cement board using mixture of eucalypt and poplar10.1016/j.indcrop.2011.03.033 ↗
5. An investigation of the suitability of some Greek wood species in wood–cement composites manufacture10.1007/s00107-006-0126-8 ↗
6. Wood–cement composites: a review10.1007/s00107-004-0501-2 ↗
7. Correlation between wood–cement compatibility and wood extractives
8. Lemon balm (Melissa officinalis): chemical composition and fiber morphology10.1007/s10924-010-0279-8 ↗
9. Dimensional stability of cement-bonded composite boards produced from rattan cane particles10.1163/1569159054699308 ↗
10. Trial production and testing of cement-bonded particleboard from rattan furniture waste
11. Development of coconut coir-based lightweight cement board10.1016/j.conbuildmat.2005.08.028 ↗
12. Thickness swelling components and water absorption of cement-bonded particleboards made from gmelina wood, bagasse and coconut husk
13. Strength and water absorption characteristics of cement-bonded particleboard produced from coconut husk
14. Investigation of the dimensional stability of cement-bonded composite boards fabricated from coffee husks