journal article·2015-02Open access

Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste

B. Gómez-Meijide, I. Pérez, G. Airey, N. Thom

Abstract

[Abstract:] The stiffness of cold asphalt mixtures (CAM) with 100% recycled construction and demolition waste aggregates (CDWA) was studied from three different points of view: the indirect tensile stiffness modulus (ITSM), the dynamic modulus at different temperatures and frequencies and the correlation between them. It was found that CAM with CDWA frequently achieved higher stiffness than control mixes using natural aggregate (NA), but that they required significantly higher bitumen and water contents. They were less temperature susceptible, therefore potentially more fatigue resistant, but more complicated to design. Finally, a clear dependency on the compaction process (static and gyratory) was also found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A laboratory study on cold-mix, cold lay emulsion mixtures
2. A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials10.1016/j.conbuildmat.2012.06.032 ↗
3. Read · 2003
4. Highway Authority and Utility Committee (HAUC). Specification for the reinstatement of opening in highways, new roads and street works. In: Act 1991. London, UK: HMSO; 1992.
5. James · 2006
6. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
7. Evaluating and improving the performance of cold asphalt emulsion mixes
8. Laboratory investigation into mechanical properties of cement emulsified asphalt mortar10.1016/j.conbuildmat.2014.04.113 ↗
9. Improving the compressive strengths of cold-mix asphalt using asphalt emulsion modified by polyvinyl acetate10.1016/j.conbuildmat.2005.07.017 ↗
10. European Asphalt Pavement Association (EAPA). Asphalt in figures. EAPA; 2012.
11. Thanaya I. Improving the performance of cold bituminous emulsion mixtures incorporating waste materials [Ph.D. thesis]. UK: The University of Leeds; 2003.
12. Used cylinder oil modified cold-mix asphalt concrete10.3923/jas.2007.3485.3491 ↗
13. Green bituminous asphalt relevant for highway and airfield pavement10.1016/j.conbuildmat.2011.12.065 ↗
14. The mechanical properties of asphalt mixtures with Recycled Concrete Aggregates10.1016/j.conbuildmat.2009.08.046 ↗
15. Asphalt mixtures with construction and demolition debris
16. Application of gray relational analysis to evaluate HMA with reclaimed building materials10.1061/(ASCE)0899-1561(2005)17:4(400) ↗
17. Effects of recycled concrete aggregates on properties of asphalt concrete10.1016/j.resconrec.2005.12.009 ↗
18. Value-added utilization of recycled concrete in hot-mix asphalt10.1016/j.wasman.2006.02.001 ↗
19. Potential of recycled fine aggregates powder as filler in asphalt mixture10.1016/j.conbuildmat.2011.04.022 ↗
20. Mix design and performance analysis of asphalt concretes with electric arc furnace slag10.1016/j.conbuildmat.2011.03.037 ↗
21. Experimental investigation on related properties of asphalt mastic containing recycled red brick powder10.1016/j.conbuildmat.2010.12.040 ↗
22. Use of aggregates produced from marble quarry waste in asphalt pavements10.1016/j.buildenv.2006.03.012 ↗
23. Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures10.1016/j.conbuildmat.2013.10.096 ↗
24. A proposed methodology for the global study of the mechanical properties of cold asphalt mixtures10.1016/j.matdes.2013.12.079 ↗
25. Technical Association of Bituminous Emulsions (ATEB). Gravel-emulsion specifications. ATEB (consulted on-line in last time on 04/08/2014).
26. AENOR. Asociación Española de Normalización y Certificación. UNE EN 933-3. Ensayos para determinar las propiedades geométricas de los áridos. Parte 3: Determinación de la forma de las partículas. Índice de lajas. Madrid, Spain; 2012.
27. AENOR. Asociación Española de Normalización y Certificación. UNE EN 933-5. Ensayos para determinar las propiedades geométricas de los áridos. Parte 5: Determinación del porcentaje de caras de fractura de las partículas de árido grueso. Madrid, Spain; 1999.
28. AENOR. Asociación Española de Normalización y Certificación. UNE EN 933-8. Ensayos para determinar las propiedades geométricas de los áridos. Parte 8: Evaluación de los finos. Ensayo del equivalente de arena. Madrid, Spain; 2000.
29. AENOR. Asociación Española de Normalización y Certificación. UNE EN 1097-2. Ensayos para determinar las propiedades mecánicas y físicas de los áridos. Parte 2: Métodos para la determinación de la resistencia a la fragmentación. Madrid, Spain; 2010.
30. AENOR. Asociación Española de Normalización y Certificación. UNE EN 1097-6. Ensayos para determinar las propiedades mecánicas y físicas de los áridos. Parte 6: Determinación de la densidad de partículas y la absorción de agua. Madrid, Spain; 2006.
31. 1997
32. Ministerio de Obras Públicas y Transportes. Normas NLT. Ensayos de carreteras. Dirección General de Carreteras. 2nd ed. Madrid, Spain: 2002.
33. Witczak · 2004
34. Lee H, Kim Y, Han B. Laboratory performance evaluation of CIR-emulsion and its comparison against CIR-foam test results from phase II. Final Report TR-578 Phase III. USA: The University of Iowa; 2009.
35. National Center for Asphalt Technology at Auburn University (NCAT). Hot Mix Asphalt Materials, Mixture Design and Construction. 3rd ed. Lanham, Maryland; 2009.
36. Empirical correlation of indirect tension resilient modulus and complex modulus test results for asphalt concrete mixtures10.1080/14680629.2008.9690165 ↗