Preparation process to affect stability in waste polyethylene-modified bitumen
Source abstract
Abstract
Abstract An analysis of waste polyethylene (WPE) modified bitumens prepared using a variety of approaches is described in this study. The WPE was obtained from commercially-available packaging bags. It has recently been shown that addition of WPE to bitumen enhances the high temperature stability of the modified bitumen. In this paper, WPE-modified bitumens were prepared using a high-speed shear mixer employing different processing parameters. High temperature storage stability tests and morphological analysis showed that a shear rate of 3750 rpm, at 150 °C and shear time of 1.5 h to be the optimal processing parameters of storage stability. In addition, differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) were used to analyze the thermal stability of the WPE-modified bitumen. We found that the thermal stability of the modified bitumen surpassed that of the base bitumen, but was generally independent of the preparation parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Ageing by UV radiation of an elastomer modified bitumen10.1016/j.fuel.2008.02.008 ↗
2. Effect of processing on the rheological properties of poly-urethane/urea asphalts products10.1016/j.fuproc.2010.03.028 ↗
3. Experimental study of fibers in stabilizing and reinforcing bitumen binder10.1016/j.fuel.2009.08.020 ↗
4. Nanoclay-modified asphalt materials: preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
5. Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture10.1016/j.conbuildmat.2010.06.038 ↗
6. Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen10.1016/j.matchemphys.2011.04.078 ↗
7. Study on combustion mechanism of asphalt binder by using TG–FTIR technique10.1016/j.fuel.2010.01.012 ↗
8. Dynamic mechanical characterization of asphalt concrete mixes with modified asphalt binders10.1016/j.msea.2011.05.008 ↗
9. Combined modification of asphalt with wasted packaging polyethylene and organophilic montmorillonite10.1016/j.polymertesting.2011.11.008 ↗
10. Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder10.1002/pat.3048 ↗
11. Effects of polymer modification on the fuel resistance of asphalt binders10.1016/j.fuel.2008.12.023 ↗
12. Effect of waste plastic as modifier on thermal stability and degradation kinetics of bitumen/waste plastics blend10.1016/j.tca.2010.06.013 ↗
13. Rheological properties of asphalt/SBS/clay blends10.1016/j.eurpolymj.2008.08.032 ↗
14. Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts10.1016/j.cocis.2006.09.001 ↗
15. Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites10.1016/j.eurpolymj.2009.12.024 ↗
16. Effect of montmorillonite on properties of Styrene–Butadiene–Styrene copolymer-modified bitumen10.1002/pen.20802 ↗
17. Preparation and properties of montmorillonite modified asphalts10.1016/j.msea.2006.10.037 ↗
18. Compatibilizer in waste tire powder and low-density polyethylene blends and the blends modified asphalt10.1002/app.34634 ↗
19. Characterization of petroleum bitumens and their fractions by thermogravimetric analysis and differential scanning calorimetry
20. Ignitability and thermal stability of asphalt binders and mastics for flexible pavements in highway tunnels10.1016/j.conbuildmat.2012.07.096 ↗
21. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts10.1016/j.conbuildmat.2010.06.048 ↗