Design of inorganic polymer cements: Effects of matrix strengthening on microstructure
Source abstract
Abstract
Abstract The effects of bulk composition and microstructure on strengthening mechanisms and fracture resistance were investigated for metakaolin based geopolymers. Crack initiation and propagation under mechanical and environmental stresses were correlated to pore size distribution and bulk composition. Based on IR spectra and porosity analysis, it was observed that capillary pores and the nature of alkali-aluminosilicate hydrated named polysialates (H–M–A–S) determine cracks initiation site in the Al-rich geopolymer samples with low Si/Al molar ratio (range 1.23–1.5). These samples exhibited low flexural strength, Young modulus and Impact toughness as well as delayed failure under environmental stresses. Increasing the Si/Al molar ratio (range 1.79–2.42) improved the flexural strength and Impact toughness. Formation of more polymerized H–M–A–S phases contributed to strengthening the matrices and hinder axial cracks; consequence of toughening mechanisms developed by the coarsening on molecular scale of H–M–A–S.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites10.1002/9781118406892.ch15 ↗
2. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
3. Geopolymer technology: the current state of art10.1007/s10853-006-0637-z ↗
4. Davidovits J. Geopolymer chemistry and applications. USA: Publ. Morrisville; 570P; 2008.
5. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
6. Chemical optimization of the compressive strength of aluminosilicate geopolymers synthesized by sodium silicate activation of metakaolinite10.1039/b212629j ↗
7. Microstructure and microanalysis of inorganic polymer cements. 2: The gel binder10.1007/s10853-008-3078-z ↗
8. Spatial distribution of pores in fly ash-based inorganic polymer gels visualized by wood’s metal intrusion10.1016/j.micromeso.2009.05.016 ↗
9. Glass breaks like metals, but at the nanometer scale10.1103/PhysRevLett.90.075504 ↗
10. Nano-ductile crack propagation in glasses under stress corrosion: spatiotemporal evolution of damage in the vicinity of crack tip10.1016/j.ijsolstr.2004.06.024 ↗
11. The relation between porosity, microstructure and strength, and the approach to advanced cement-based materials
12. Characteristics of aluminosilicate hydrogels related to commercial geopolymers10.1016/S0167-577X(03)00325-2 ↗
13. Chemical and structural microanalysis of aluminosilicate geopolymers synthesized by sodium silicate activation of metakaolinite10.1111/j.1551-2916.2009.03191.x ↗
14. A molecular mechanism for stress corrosion in vitreous silica10.1111/j.1151-2916.1983.tb15715.x ↗
15. A molecular interpretation of stresses-corrosion in silica10.1038/295511a0 ↗
16. The phenomena of rupture and flow in solids
17. Fracture mechanics principles10.1016/0109-5641(95)80044-1 ↗
18. Kamseu Elie, Leonelli Cristina, Transformation of polysialate matrixes from Al-Rich and Si-Rich metakaolins: polycondensation and physico-chemical properties. In: Kriven Waltraud M, Zhou Yanchun, Radovic Miladin, Mathur Sanjay, Ohji Tatsuki, editors. Strategic materials and computational design: ceramic engineering and science proceedings. The American Ceramic Society Hoboken, NJ, USA: John Wiley & Sons; 2010., Inc. ISBN:9780470944103.10.1002/9780470944103.ch4 ↗
19. A critical-evaluation of direct crack measurements materials10.1111/j.1151-2916.1981.tb10320.x ↗
20. characterization of mineral building materials by mercury-intrusion porosimetry10.1002/ppsc.200601008 ↗
21. Pore size distribution and compressive strength of waste clay brick mortar10.1016/S0958-9465(00)00070-6 ↗
22. The mechanism of geopolymer gel formation investigated through seeded nucleation10.1016/j.colsurfa.2007.12.019 ↗
23. ATR-FTIR analysis of fly ash geopolymer gel aging10.1021/la700713g ↗
24. In situ ATR-FTR study of the early stages of fly ash geopolymer gel formation”10.1021/la701185g ↗
25. Composition design and microstructural characterization of calcined kaolin-based geopolymer cement10.1016/j.clay.2009.11.002 ↗
26. Mehta PK, Folliard KJ. Rice husk ash-a unique supplementary cementing material: durability aspects, vol. SP-154. ACI Special Publications; 1995. p. 531–42.
27. The effect of silica availability on the mechanism of geopolymerization10.1016/j.cemconres.2011.02.001 ↗
28. Chemical interaction between siliceous aggregates and low-Ca alkali-activated cements10.1016/j.cemconres.2007.03.012 ↗
29. Dissolution processes, hydrolysis and condensation reactions during geopolymer synthesis: part I – low Si/Al ratio systems10.1007/s10853-006-0820-2 ↗
30. Different manifestation of the alkali-silica reaction in concrete according to the reaction kinetics of the reactive aggregate10.1016/j.cemconres.2005.12.022 ↗
31. The strength of glass containing cracks
32. Effect of the rate of loading on the breaking strength of glass
33. Fracture energy and tensile properties of high-strength concrete
34. Environmentally enhanced fracture of glass: a historical perspective10.1111/j.1551-2916.2009.03097.x ↗
35. Hydration of cementitious materials, present and future10.1016/j.cemconres.2011.03.026 ↗
36. The study of disorder and nanocrystallinity in C–S–H, supplementary cementitious materials and geopolymers using pair distribution function analysis10.1016/j.cemconres.2011.03.027 ↗