Effect of curing temperatures on the alkali activation of crystalline continuous casting stainless steel slag
Source abstract
Abstract
Abstract The binding properties of continuous casting stainless steel slag were studied when activated by a combination of Na silicate and 5 M NaOH as well as K silicate and 5 M KOH at steam curing temperatures of 60, 70, 80, 90, 100 and 110 °C. The slag mortars developed moderate compressive strength (∼5 MPa) at 60 °C which initially increased moderately and then steeply (>30 MPa) at higher curing temperatures. The porosity of K activated mortars was lower than for Na activated mortars. Thermal and ATR-FTIR analysis showed the formation of C–S–H type of reaction products for both activators at all temperatures, while the formation of brucite was promoted at higher curing temperatures. A much denser hydrated matrix with a better bonding with aggregates was formed at higher curing temperatures. Heavy metal leaching from the slag was dependent on its type and curing temperature of samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. The action of alkalis on blast furnace slag
2. Glukhovsky · 1959
3. Alkali-activated slag mortars: mechanical strength behaviour10.1016/S0008-8846(99)00154-4 ↗
4. Shi · 2006
5. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
6. Effect of mechanical activation on the hydraulic properties of stainless steel slags10.1016/j.cemconres.2012.02.016 ↗
7. Salman M, Cizer Ö, Pontikes Y, Snellings R, Geysen D, Blanpain B, et al. Thermo-alkali activation of continuous casting stainless steel slag. In: 12th Conference of the European Ceramic Society – ECerS XII. Stockholm, Sweden; 2011.
8. Taylor · 1990
9. Phase transformations in dicalcium silicate: II, TEM studies of crystallography, microstructure, and mechanisms10.1111/j.1151-2916.1992.tb05593.x ↗
10. Characteristics and cementitious properties of ladle slag fines from steel production10.1016/S0008-8846(01)00707-4 ↗
11. Hydraulic reactions of LD steelwork slags10.1016/0008-8846(89)90050-1 ↗
12. Characterization of ladle furnace basic slag for use as a construction material10.1016/j.conbuildmat.2008.10.003 ↗
13. Coelho AA. Topas Academic v4.1 ; 2007.
14. EN1097-6. Tests for mechanical and physical properties of aggregates – part 6: determination of particle density and water absorption; 2000.
15. EN 196-6: methods of testing cement. Part 6: determination of fineness, 1994.
16. Effect of free water removal from early-age hydrated cement pastes on thermal analysis10.1016/j.conbuildmat.2009.06.004 ↗
17. Cementitious properties of ladle slag fines under autoclave curing conditions10.1016/S0008-8846(03)00211-4 ↗
18. Effect of alkali metals on the preferential geopolymerization of stilbite/kaolinite mixtures10.1021/ie010042b ↗
19. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
20. Effect of the alkali metal activator on the properties of fly ash-based geopolymers10.1021/ie980804b ↗
21. Influence of precipitation conditions of magnesium hydroxide on its thermal decomposition in the preparation of active MgO10.1016/0040-6031(92)80033-S ↗
22. Gaylussite: thermal properties by simultaneous thermal analysis
23. Influence of foreign materials upon the thermal decomposition of dolomite, calcite and magnesite part I. Influence of sodium chloride10.1016/0040-6031(80)87056-0 ↗
24. Reactivity and strength development of CO2 activated non-hydraulic calcium silicates10.1016/0008-8846(79)90095-4 ↗
25. Thermal stability of potassium carbonate near its melting point10.1016/S0040-6031(98)00289-5 ↗
26. Structure of calcium silicate hydrate (C–S–H): near-, mid-, and far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
27. Gadsden · 1975
28. IR spectroscopy
29. IR and Raman spectroscopic studies of sol–gel derived alkaline-earth silicate glasses10.1007/s12034-011-0064-x ↗
30. Lea · 1998
31. Arrêté du Gouvernement wallon favorisant la valorisation de certains déchets. Ministère de la Région Wallonne: Moniteur Belge; 2001. p. 23859–83.
32. Chromium release from waste incineration air-pollution-control residues10.1021/es049346q ↗