journal article·2012-12

A comprehensive methodology to test the performance of Steel Fibre Reinforced Self-Compacting Concrete (SFR-SCC)

Liberato Ferrara, Patrick Bamonte, Alessio Caverzan, Abdisa Musa, Irem Sanal

Publisher page

Abstract

Abstract The fibre dispersing ability represents a key distinctive feature of the fresh state performance of a Steel Fibre Reinforced Self Compacting Concrete (SFR-SCC) which has to be carefully assessed, also in the sight of its outcomes on the mechanical performance in the hardened state. In this paper, with reference to a typical SFR-SCC mix-composition (containing 50 kg/m3 hooked steel fibres 35 mm long with an aspect ratio equal to 65), different methods to evaluate the resistance to static and dynamic segregation of fibres have been discussed and the results cross analysed also in order to address a comprehensive testing methodology and to assess its reliability. Among them, cylinder segregation test (for static segregation), channel flow test (for dynamic segregation) as well as the slump flow test: as a matter of fact, through the latter, by measuring the content of fibres in different concentric circular areas of the patty, information on dynamic segregation could be assessed. This test method represents the extension to FR-SCC of a methodology already developed for plain SCC. Results obtained from fresh state performance tests have been finally correlated to the fracture toughness properties in the hardened state, measured on specimens cast according to the same procedure employed for fresh state tests. This set of data allows a thorough evaluation of the correlation among fresh state performance, fibre dispersion and mechanical properties in the hardened state, furthermore enriching the meaningfulness, in a design oriented perspective, of material acceptance tests for quality control in the fresh state. The influence has been finally assessed of expected tolerances in the dosage of the mix constituents (water, cement, and superplasticizers) on the performance in both the fresh and hardened state, as correlated through fibre dispersion related issues.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. The use of steel fibres in self-compacting concrete
2. Shrinkage cracking of steel fibre reinforced self compacting concrete overlays – tests methods and theoretical modelling
3. Fresh and hardened state properties of self-consolidating fiber-reinforced concrete
4. Relationships between fibre distribution, workability and the mechanical properties of SFRC applied to precast roof elements10.1617/s11527-005-9017-4 ↗
5. Grünewald S. Performance based design of self compacting steel fiber reinforced concrete. PhD Thesis, Delft University of Technology; 2004.10.1617/2912143624.030 ↗
6. di Prisco C, di Prisco M, Mauri M, Scola M. A new design for stabilizing round slopes. In: Proceedings of the fib conference, Naples, Italy; June 2006 [paper 823-CD-Rom].
7. Development and application of steel fiber reinforced self-compacting concrete
8. Comparison for durability parameters between conventional concrete standard SCC and steel fibre reinforced SCC for construction of thin elements. Part 2: thin concrete walls application
9. Mechanical characterization of steel fiber reinforced self-compacting refractory concrete
10. Post-cracking behaviour of self compacting steel fibre reinforced concrete
11. Syntetic macro-fibers reinforced self compacting concrete for lightweight precast elements. A case study
12. On the use of viscosity enhancing admixtures to improve the homogeneity of fibre distribution in fibre reinforced concretes
13. Correlation of fiber dispersion, rheology and mechanical performance of FRCs10.1016/j.cemconcomp.2006.08.006 ↗
14. Effect of steel fiber reinforcement on fresh mix properties of concrete
15. Non destructive monitoring of fiber orientation using AC-IS: an industrial scale application10.1016/j.cemconres.2006.05.026 ↗
16. On the connections between fresh state behavior, fiber dispersion and toughness properties of steel fiber reinforced concrete
17. Manufacturing, fibre anisotropy and fracture of hybrid fibre concrete10.1016/j.engfracmech.2006.01.028 ↗
18. On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC10.1617/s11527-007-9229-x ↗
19. Correlation among fresh state behaviour, fiber dispersion and toughness properties of SFRCs10.1061/(ASCE)0899-1561(2008)20:7(493) ↗
20. High mechanical performance of fiber reinforced cementitious composites: the role of “casting-flow” induced fiber orientation10.1617/s11527-010-9613-9 ↗
21. Ferrara L, di Prisco M, Lamperti MGL. Identification of the stress–crack opening behavior of HPFRCC: the role of flow-induced fiber orientation. In: Oh BH et al. editor. Proceedings of FraMCoS 7, 7th international conference of fracture mechanics of concrete and concrete structures, Jiejiu, South Korea, 23–28 May 2010. p. 1541–50.
22. Assessment of fibre orientation in ultra high performance fiber reinforced concrete and its effect on flexural strength10.1617/s11527-009-9562-3 ↗
23. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
24. prEN12350-8. Testing fresh concrete – part 8 – self compacting concrete – slump flow test.
25. prEN12350-9. Testing fresh concrete – part 9 – self compacting concrete – V-funnel test.
26. prEN12350-10. Testing fresh concrete – part 10 – self compacting concrete – L-box test.
27. prEN12350-11. Testing fresh concrete – part 11 – self compacting concrete – sieve segregation test.
28. prEN12350-12. Testing fresh concrete – part 12 – self compacting concrete – J-ring test.
29. ASTM C1610/C1610M-10. Standard test method for static segregation of self consolidating concrete using column technique.
30. ASTM C1611/C1611M-09be-1. Standard test method for slump flow of self consolidating concrete.
31. ASTM C1621/C1621M-09b. Standard test method for passing ability of self consolidating concrete by J-ring.
32. EN 14651. Test methods for metallic fibre concrete: measuring the flexural tensile strength (limit of proportionality – LOP – residual).
33. ASTM C1399/C1399M-10. Standard test method for obtaining average residual strengths of fiber reinforced concrete.
34. ASTM C1550-10a. Standard test method for flexural toughness of FRC (using centrally loaded round panel).
35. ASTM C1609/C1609M-10. Standard test method for flexural performance of FRC (using beam with third point loading).
36. Flow characteristics and acceptance criteria of fiber-reinforced self-compacted concrete (FR-SCC)10.1016/j.conbuildmat.2011.07.004 ↗
37. Groth P. Steel fibre reinforced SCC, final report of task 6, Brite Euram project (BE 96-3801) – rational production and improved working environment through using SCC; 2000.
38. Comparison of durability parameters between conventional concrete standard SCC and steel fibre reinforced SCC for construction of thin elements. Part 1: durability tests
39. Experimental study of the bond between steel rein-forcement and self-compacting high strength fiber reinforced cementitious composites
40. Testing and performance of fiber-reinforced, self-consolidating concrete10.1007/BF02479648 ↗
41. Model Code 2010. First complete draft. vol. 2. p. 292+xx–288 +xviii.
42. Self consolidating concrete robustness in continuous production regarding fresh and hardened state properties
43. Predicting dynamic segregation resistance of self-consolidating concrete from the slump-flow test10.1520/JAI101970 ↗
44. Correlating dynamic segregation of SCC to the slump-flow test10.1016/j.conbuildmat.2011.08.052 ↗
45. A method for mix-design of fiber reinforced self compacting concrete10.1016/j.cemconres.2007.03.014 ↗
46. CNR-DT204. Guidelines for design and execution of FRC structures; 2006. p. 59 [in Italian].
47. di Prisco M, Ferrara L. Concrete and construction technology: the fibre reinforced concrete experience. In: Proceedings fib symposium, Prague, Czech Republic; 8–10 June 2011.
48. Simple tools for fiber orientation prediction in industrial practice10.1016/j.cemconres.2011.05.008 ↗