journal article·2014-07

Direct tensile strength of lightweight concrete with different specimen depths and aggregate sizes

Se-Jin Choi, Keun-Hyeok Yang, Jae-Il Sim, Byong-Jeong Choi

Publisher page

Abstract

Abstract To examine the size effect in direct tension, 8 ready-mixed concrete batches classified into all-lightweight concrete (ALWC) and sand-lightweight concrete (SLWC) groups were prepared. In each group, the maximum aggregate size varied between 4 mm and 19 mm, and then the lateral depth of specimen with rectangular section ranged from 100 mm to 500 mm in each concrete batch. The size effect curves based on the basic formulas proposed by Bažant (1984) [1], Kim and Eo (1990) [2], and Yang and Sim (2011) [3] were also determined using a total of 28 lightweight concrete (LWC) data of current tests and 114 normal-weight concrete (NWC) data compiled from the available literature (Carpinteri and Ferro, 1994; Hu, 2011) [4,5], though specimens with lateral depth beside 100 mm is very insufficient even in NWC. The present experimental observations and verifications by prediction models clearly showed that the size effect is more notable with the decrease of the unit weight of concrete and it is stronger in direct tension than in compression. The validity of Bažant’s model (Bažant, 1984) [1] is significantly dependent on the maximum aggregate size, while the models proposed by Kim and Eo (1990) [2] and Yang and Sim (2011) [3] closely predict the size effect trend observed from test data, confirming that the influence of the maximum aggregate size on the concrete tensile strength and the size effect is negligible, especially for LWC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Size effect in blunt fracture: concrete, rock, metal10.1061/(ASCE)0733-9399(1984)110:4(518) ↗
2. Size effect in concrete specimens with dissimilar initial cracks10.1680/macr.1990.42.153.233 ↗
3. Yang · 2011
4. Size effects on tensile fracture properties: a unified explanation based on disorder and fractality of concrete microstructure10.1007/BF02473124 ↗
5. Size effect on tensile softening relation10.1617/s11527-010-9614-8 ↗
6. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
7. Neville · 1995
8. Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate10.1016/j.conbuildmat.2012.02.053 ↗
9. Effect of specimen size on compressive modulus of rupture and splitting strength of cement mortar10.3923/jas.2011.584.588 ↗
10. Effect of aspect ratio in direct tensile strength of concrete10.4334/JKCI.2003.15.2.246 ↗
11. ACI Committee 318-11 · 2011
12. The European standard EN 1992-1-1:2004 · 2004
13. Influence of silica fume on the tensile strength of concrete10.1016/j.cemconres.2004.05.024 ↗
14. Determining tensile properties of mass concrete by direct tensile test
15. Direct tension test of concrete
16. High-strength concrete in uniaxial tension
17. Softening response of plain concrete in direct tension
18. Influence of aggregate size on fracture mechanics parameters of concretes10.1016/0262-5075(87)90025-X ↗
19. ACI Committee 213 · 2003
20. RILEM. CPC7: Direct tension of concrete specimens 1975 TC14-CPC. RILEM technical Recommendations for the testing and use of construction materials; 1994.10.1201/9781482271362 ↗
21. Tests on cementless alkali-activated slag concrete using lightweight aggregates10.4334/IJCSM.2011.5.2.125 ↗
22. Direct tensile fatigue of concrete by the use of friction grips
23. U.S. Bureau of Reclamation. Procedure for direct tensile strength, static modulus of elasticity and Poisson’s ratio of cylindrical concrete specimens in tension (USBR 4914-92), Concrete Manual, Part 2, 9th ed. U.S. Bureau of Reclamation; 1992.
24. Comité Euro-International du Beton (CEB-FIP). Structural concrete: Textbook on behaviour, design and performance. International Federation for Structural Concrete (Fib); 1999.