Advanced rheological characterization of Reacted and Activated Rubber (RAR) modified asphalt binders
Source abstract
Abstract
Abstract The objective of this research study was to conduct binder characterization of the Reacted and Activated Rubber (RAR) modified asphalts with varying dosages, and compare these materials with two virgin and one commercially available rubber modified (C60) binders. RAR modification raised the upper Performance Grade temperatures to a higher grade than the base binder making these binders well suited to reduce rutting. Non-recoverable creep compliance decreased and recovery increased with increasing RAR contents. RAR modified asphalts were highly resilient in nature since they had substantially lower strains than the virgin and C60 binders attributed to the presence of RAR additive that provided it an enduring viscoelastic characteristic. Overall, it is recommended that at least 15% RAR be used as minimal dosage in designing an asphalt mixture to obtain an effective material with an improved performance than a mixture produced using commercially available asphalts, including the rubber-modified ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. McDonald · 1974
2. Green · 1977
3. Applicability of asphalt-rubber membranes in reducing reflection cracking
4. Effect of mix ingredients on the behavior of rubber-modified asphalt mixtures
5. Life cycle cost analysis of asphalt-rubber paving materials
6. Caltrans · 2003
7. Caltrans · 2006
8. OGFC meets CRM where the rubber meets the rubber 12 years of durable success
9. Evaluation of open-graded friction course mixtures containing cellulose fibers and styrene butadiene rubber polymer10.1061/(ASCE)0899-1561(2005)17:4(416) ↗
10. A laboratory study on stone matrix asphalt using ground tire rubber10.1016/j.conbuildmat.2006.02.005 ↗
11. Evaluating permanent deformation in asphalt rubber mixtures10.1016/j.conbuildmat.2009.12.021 ↗
12. Laboratory evaluation of open-graded asphalt mixes with small aggregates and various binders and additives10.3141/2209-08 ↗
13. Dense graded hot mixes using asphalt-rubber binders with high rubber contents10.1080/14680629.2006.9690025 ↗
14. Asphalt rubber: Performance tests and pavement design issues10.1016/j.conbuildmat.2014.03.020 ↗
15. Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review10.1016/j.conbuildmat.2013.09.007 ↗
16. Introducing an Activated Mineral as Innovative Binder-Stabilizer for SMA Paving Mixtures
17. Reacted and activated rubber: elastomeric asphalt extender10.3141/2371-04 ↗
18. I. Ishai, M. Amit, T. Kesler, R. Peled, New Advancements in Rubberized Asphalt Using an Elastomeric Asphalt Extender – Three Case Studies, Final Report prepared for Consulpav International, 2014 (accessed 3 February 2016: www.consulpav.com/shrp/?page_id=33).
19. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
20. A study on fatigue modeling of hot mix asphalt mixtures based on the viscoelastic continuum damage properties of asphalt binder10.1016/j.conbuildmat.2015.12.066 ↗
21. The relationship between nonlinearity of asphalt binders and asphalt mixture permanent deformation10.1080/14680629.2010.9690298 ↗
22. Selection of type of warm mix asphalt additive based on the rheological properties of asphalt binders10.1016/j.jclepro.2015.03.036 ↗
23. Roberts · 1996
24. Elastomeric Asphalt Extender – A New Frontier on Asphalt Rubber Mixes
25. G.B. Way, K.E. Kaloush, K.P. Biligiri, Asphalt-Rubber Standard Practice Guide, second ed., Prepared for the Rubber Pavements Association, USA, October 2012.
26. Factors Controlling the effect of Crumb Rubber on Critical Properties of Asphalt Binders (With Discussion)
27. Influence of crumb rubber and digestion time on the asphalt rubber binders10.3166/rmpd.7.131-148 ↗
28. Lee · 2006
29. Factors affecting the viscosity of crumb rubber-modified asphalt10.1080/10916466.2010.497007 ↗
30. Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder10.1080/10298436.2012.721548 ↗
31. ASTM D5/D5M-13 · 2013
32. ASTM D36/D36M-14 · 2014
33. ASTM D4402/D4402M-15 · 2015
34. ASTM D7175-15 · 2015
35. ASTM D7405-15 · 2014
36. Aashto · 2009
37. ASTM D2493/D2493M-09 · 2014
38. Lytton · 1993 · vol. 357
39. Revised predictive model for dynamic (complex) modulus of asphalt mixtures10.1177/0361198196154000103 ↗
40. ASTM D1754/D1754M-09 · 2014
41. Tschoegl · 2012
42. Federal Highway Administration. Technical Brief. FHWA‐HIF‐11‐038. Office of Pavement Technology, US Department of Transportation. Washington, DC, USA, 2011 (accessed 10 Feb 2016: http://www.fhwa.dot.gov/pavement/materials/pubs/hif11038/hif11038.pdf).
43. Bahia · 2001
44. ASTM D6114/D6114M – 09 Standard Specification for Asphalt-Rubber Binder, Active Standard ASTM D6114/D6114M, Developed by Subcommittee: D04.40, Book of Standards Volume: 04.03.