journal article·2016-10Open access

Development of porous fired clay bricks with bio-based additives: Study of the environmental impacts by Life Cycle Assessment (LCA)

Cecile Bories, Emeline Vedrenne, Anne Paulhe-Massol, Gerard Vilarem, Caroline Sablayrolles

Publisher page

Abstract

The incorporation of bio-based pore-forming agents, from either agricultural (wheat straw – WS and olive stone flour – OSF) or chemical (glycerol carbonate – GC and dimethyl carbonate – DMC) origins, into clay formulations, has been investigated. Fire clay porous tablets have been manufactured at laboratory scale and characterized through physical, mechanical and thermal properties. An increase of 7.2% of the porosity correlated to a decrease of 7.0% of the thermal conductivity was measured for the best samples. The environmental impacts of these formulations have also been examined through a Life Cycle Assessment (LCA) using the ReCiPe v1.10 method. It was noticed that the incorporation of pore-forming agents led a decrease of about 15–20% of all the studied impact categories. The advantage of the use of bio-based additives in clay bricks was then confirmed from both performance (lighter material with a better thermal insulation) and environmental points of view.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Hygrothermal properties of building materials · Therapeutic Uses of Natural Elements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M. Kornmann, Clay building materials: Manufacturing and properties [In French] (Septima), 2005.
2. Management of agricultural biomass wastes: preliminary study on characterization and valorisation in clay matrix bricks10.1016/j.wasman.2013.03.014 ↗
3. Development of eco-friendly porous fired clay bricks using pore-forming agents: a review10.1016/j.jenvman.2014.05.006 ↗
4. Combinations of organic and inorganic wastes for brick production10.1002/pc.22647 ↗
5. UNEP, Buildings and Climate Change: Status, Challenges and Opportunities (United Nations Environment Programme), 2006.
6. Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: a review10.1016/j.rser.2013.08.037 ↗
7. Environmental life cycle assessment of traditional bricks in Western Maharashtra, India10.1016/j.egypro.2014.07.269 ↗
8. An attributional and consequential life cycle assessment of substituting concrete with bricks10.1016/j.jclepro.2014.06.006 ↗
9. Environmental assessment of brick production in Greece10.1016/j.buildenv.2006.03.006 ↗
10. Venta · 1998
11. Wienerberger, Environmental and Health Declaration Sheets – Porotherm R37 [In French], 2010.
12. Imerys, Environmental and Health Declaration Sheets – Monomur 37,5 narrow-joint in fired clay [In French], 2011.
13. Fired clay bricks using agricultural biomass wastes: Study and characterization10.1016/j.conbuildmat.2015.05.006 ↗
14. Thermal decomposition of dimethoxymethane and dimethyl carbonate catalyzed by solid acids and bases10.1016/j.tca.2005.01.021 ↗
15. C. Bories, Study of the characteristics of a biobased pore-forming agent and mechanisms used to obtain a micro-porous building brick with high thermal and mechanical properties [In French]. Institut National Polytechnique, Toulouse, Sciences des Agroressources, 2015.
16. American Society for Testing and Materials (ASTM), Standard C210-95, Standard Test Method for Reheat Change of Insulating Firebrick, 1995.
17. H. Hornain, GranDuBé: quantities related to the sustainability of concrete [In French] (Presses des Ponts), 2007.
18. American Society for Testing and Materials (ASTM), Standard C518, Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, 2004.
19. ISO 8301, Thermal insulation – Determination of thermal resistance and related properties under steady – flow meter method [In French], 1991.
20. NF EN 12667, Thermal performance of materials and products for buildings – Determination of thermal resistance by means of guarded hot plate and heat flow meter methods – Products of high and medium thermal resistance. [In French], 2001.
21. ISO 14040, Environmental management – Life cycle assessment – Principles and framework. [In French], 2006.
22. ISO 14044, Environmental management – Life cycle assessment – Requirements and guidelines. [In French], 2006.
23. Comparative environmental life cycle assessment of thermal insulation materials of buildings10.1016/j.enbuild.2014.05.057 ↗
24. A. Nefzaoui, Study of the use of olive by-products in animal feed in Tunisia. [In French] (Tisserand, Alibés), 1983.
25. Resource consumption and emissions from olive oil production: a life cycle inventory case study in Cyprus10.1016/j.jclepro.2007.04.002 ↗
26. S. Claude, Z. Mouloungui, J.W. Yoo, A.E. Gaset, Process for the preparation of glycerol carbonate [In French]. Patent FR 2778182, 1999.
27. Transesterification of propylene carbonate with methanol using Mg-AlCO3 hydrotalcite as solid base catalyst
28. Data quality management for life cycle inventories – an example of using data quality indicators10.1016/S0959-6526(96)00043-1 ↗
29. Improvement of thermal properties of fired clays by introduction of vegetable matter10.1177/1744259109360059 ↗
30. Lightweight bricks manufactured from water treatment sludge and rice husks10.1016/j.jhazmat.2009.05.144 ↗
31. Application of spent grains to increase porosity in bricks10.1016/j.conbuildmat.2004.05.014 ↗
32. The use of recycled paper processing residues in making porous brick with reduced thermal conductivity10.1016/j.ceramint.2009.02.027 ↗
33. Properties of fired clay bricks with incorporated biomasses: cases of olive stone flour and wheat straw residues10.1016/j.conbuildmat.2015.10.040 ↗
34. Preliminary study on the use of corn cob as pore forming agent in lightweight clay bricks: physical and mechanical features10.1016/j.jobe.2016.01.006 ↗
35. Thermal conductivity of traditional ceramics. Part I: Influence of bulk density and firing temperature10.1016/j.ceramint.2010.05.012 ↗
36. Thermal conductivity of traditional ceramics: Part II: Influence of mineralogical composition10.1016/j.ceramint.2010.05.013 ↗
37. Thermal conductivity of fired clays: effects of mineralogical and physical properties of the raw materials10.1016/j.clay.2010.06.002 ↗
38. E. Rimpel, S.M. El Ghazzali, Influence of the mineral constituents and equilibrium moisture on the thermal conductivity of bricks, in: Zi-Annual: Annual for the Brick and Tile, Structural Ceramics and Clay Pipe Industries, Bauverlag, Wiesbaden, pp. 28–52, 1998.
39. Soil thermal conductivity: effects of density, moisture, salt concentration, and organic matter10.2136/sssaj2000.6441285x ↗