Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders
Source abstract
Abstract
Abstract Polymer modified asphalt binders have been commonly used to improve the resistance of the airfield pavements to distresses, especially wheel rutting. The objective of this study was to investigate the rheological and chemical properties of the modified binders containing anti-rutting agent (ARA), polyethylene (PE) and styrene-butadiene-styrene copolymer (SBS) before and after a short-term aging procedure. Rotational viscosity, penetration degree, softening point as well as performance grade, multi-stress creep recovery (MSCR), frequency and amplitude sweep were performed to determine the effects of ARA and PE on rut depths at high temperatures. In addition, Fourier Transform Infrared Spectroscopy (FTIR) was conducted to determine the chemical properties of various polymerized binders. The test results showed that, as expected, the addition of PE and ARA polymer increased the rotational viscosity, softening point and rutting factor values and reduced the penetration degree. However, ARA could only increase complex modulus while PE had the influences on both the complex modulus and phase angle of the modified binders. In addition, the rising tendency of phase angle during frequency sweep test was totally different in terms of the binders with or without PE. Furthermore, the FTIR test results showed that the ARA has no significant effects on aging resistance, while the modified binders with PE have better resistance to aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Results of the 1989 ASCE airfield pavement survey
2. E. Guo, J. Rice, General statistic performance analysis of asphalt airport pavements, in: Federal Aviation Administration Airport Technology Transfer Conference, Atlantic City, NJ, 1999.
3. Statistical modeling of accelerated pavement failure using response surface methodology
4. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
5. Additives in asphalt
6. Polyethylene dispersions in bitumen: the effects of the polymer structural parameters10.1002/app.12942 ↗
7. Evaluation of rheology and moisture susceptibility of asphalt mixtures modified with low density polyethylene
8. Study of recycled polyethylene materials as asphalt modifiers10.1139/l06-044 ↗
9. Composite asphalt binders: effect of modified RPE on asphalt10.1061/(ASCE)0899-1561(2000)12:2(113) ↗
10. Utilization of reclaimed polyethylene in bituminous paving mixes10.1061/(ASCE)0899-1561(2002)14:6(527) ↗
11. The use of polyethylene in hot asphalt mixtures10.3844/ajassp.2007.390.396 ↗
12. Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix10.1016/S0167-577X(03)00458-0 ↗
13. Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling10.1016/j.conbuildmat.2013.03.064 ↗
14. Effect of linear low density-polyethylene grafted with maleic anhydride (LLDPE-g-MAH) on properties of high density-polyethylene/styrene–butadiene–styrene (HDPE/SBS) modified asphalt10.1016/j.conbuildmat.2013.04.047 ↗
15. B. Hui, C. Zhang, Analysis of high temperature ability influence factors of anti-rutting agent modified asphalt mixture, in: The Third International Conference on Transportation Engineering (ICTE), Chengdu, China, 2011.10.1061/41184(419)314 ↗
16. A Study on performances of asphalt mixtures intermingled with anti-rut agent PR PLASTS
17. B. Hui, C. Zhang, Performance of anti-rutting agent modified asphalt mixture in northwest regions, in: The Second International Conference on Mechanic Automation and Control Engineering (MACE), 2011, pp. 1467–1470.10.1109/MACE.2011.5987224 ↗
18. Impacts on asphalt mixture’s high temperature performance with PR series additives added10.1061/JHTRCQ.0000287 ↗
19. Rheological and fatigue properties of asphalt binders containing anti-rut agents10.4028/www.scientific.net/KEM.599.239 ↗
20. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
21. AASHTO. Standard Method of Test for Effect of Heat and Air on A Moving Film of Asphalt Rolling Thin-Film Oven Test. Washington, DC. 2008.
22. AASHTO. Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer. Washington, DC. 2013.
23. Method to predict temperature susceptibility of an asphalt binder10.1061/(ASCE)0899-1561(2002)14:3(246) ↗
24. ASTM. Standard Test Method for Penetration of Bituminous Materials. West Conshohocken, PA. 2013.
25. ASTM. Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus). West Conshohocken, PA. 2014.
26. AASHTO. Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR). Washington, DC. 2012.
27. ASTM. Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer. West Conshohocken, PA. 2016.
28. AASHTO. Standard Specification for Performance-Graded Asphalt Binder. Washington, DC. 2010.
29. Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens10.1016/S0950-0618(96)00033-5 ↗
30. AASHTO. Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep CPecovery (MSCR) Test Revision 1. Washington, DC. 2010.