Experimental study on early cracking sensitivity of lightweight aggregate concrete
Source abstract
Abstract
Abstract In this study, experimental investigations are reported on the effects of the moisture content of ceramsite, the replacement rate of aggregates, and the use of expansive agent on the early cracking sensitivity of lightweight aggregate concrete. Three kinds of commercially available lightweight aggregates (clay ceramsite, shale ceramsite, fly ash-clay ceramsite) were used in the experiment. The cracking sensitivity of concrete was investigated via splitting tensile test, plate cracking test and temperature-stress test. The results showed that the cracking sensitivity of concrete decreased with the increases in the moisture content and the replacement rate of aggregates. A model describing the relationship between the moisture content of ceramsite and the restraining stress was presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks10.1016/j.conbuildmat.2010.06.063 ↗
2. Reducing cracking in concrete structures by using internal curing with high volumes of fly ash
3. Effect of fiber addition on the autogenous shrinkage of silica fume concrete
4. An experimental approach for the analysis of early age behavior of high-performance concrete structures under restrained shrinkage10.1016/j.cemconres.2006.11.005 ↗
5. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
6. Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
7. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
8. Application of internal curing for mixtures containing high volumes of fly ash10.1016/j.cemconcomp.2012.06.008 ↗
9. Effect of prewetting degree of ceramsite on the early-age autogenous shrinkage of lightweight aggregate concrete10.1016/j.conbuildmat.2015.08.102 ↗
10. Influence of microstructure on the physical properties of self-curing concrete
11. Mitigation strategies for autogenous shrinkage cracking10.1016/S0958-9465(03)00045-3 ↗
12. Internal curing of concrete (RILEM TC-ICC 2003). RILEM Technical Committee, 2003.
13. Research progress of internal curing technology of concrete
14. Microstructure, crack-propagation and mechanical properties of cement pastes containing high volumes of fly ashes10.1016/0008-8846(95)00109-P ↗
15. The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete10.1016/j.conbuildmat.2006.10.011 ↗
16. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗
17. Bentz · 2011
18. Creep, shrinkage, and cracking of restrained concrete at early age
19. Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions10.1016/j.cemconcomp.2004.09.020 ↗
20. Evaluation method of cracking resistance of lightweight aggregate concrete10.1007/s11771-014-2102-5 ↗
21. GB/T 17431.2-2010 · 2010
22. GB/T 50081-2002 · 2002
23. GB/T 50082-2009 · 2009
24. Lin · 2006
25. ASTM · 2013
26. Influence of superplasticizers on the early-age crack resistance of concrete
27. Influencing factors and evaluation methods for shrinkage and cracking of lightweight aggregate concrete
28. Yin · 2012
29. P.J. Li, X.B. Liu, Basic mechanical properties of Haifa high-strength shale ceramsite concrete, in: The 5th National Lightweight Aggregate and Lightweight Aggregate Concrete Academic Discussion, 2005.
30. Early ages shrinkage and cracking in cementitious systems
31. Internal curing of concrete
32. Protected paste volume in concrete extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
33. Long-term volume changes and microcracks formation in high strength mortars10.1016/S0008-8846(00)00251-9 ↗
34. Effects of aglite on structure and capillary water absorption property of concrete
35. Evaluation of capillary pore size characteristics in high-strength concrete at early ages10.1016/j.cemconres.2004.06.036 ↗
36. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
37. Effect of partial replacement of sand with dry oyster shell on the long-term performance of concrete10.1016/j.conbuildmat.2009.10.032 ↗
38. Contribution to the formation mechanism of the transition zoon between rock-cement paste10.1016/0008-8846(93)90099-U ↗
39. Effect and mechanism of surface-coating pozzalanics materials around aggregate on properties and ITZ microstructure of recycled aggregate concrete10.1016/j.conbuildmat.2009.10.038 ↗
40. Research on the hydration, hardening mechanism, and microstructure of high performance expansive concrete10.1016/S0008-8846(99)00084-8 ↗
41. Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete10.1016/j.conbuildmat.2010.06.033 ↗
42. Effect of the water saturation of aggregates on the shrinkage induced cracking risk of concrete at early age10.1016/j.cemconcomp.2014.02.006 ↗