journal article·2017-10Open access

Correlation between the Barcelona test and the bending test in fibre reinforced concrete

Eduardo Galeote, Ana Blanco, Sergio H.P. Cavalaro, Albert de la Fuente

Abstract

The Barcelona test (BCN) is an alternative method to characterize the post-cracking behaviour of fibre reinforced concrete (FRC). Given its simplicity, the reduced scatter of the results and low material consumption, the BCN may represent a suitable method for the quality control of FRC. For that, a correlation between the results of the BCN and the bending test is currently required since the latter is considered the reference for the characterization of the material and for deriving the constitutive design equations. The objective of this paper is to propose such correlation following an approach that takes into account the intrinsic variability of FRC. An experimental program involving 21 mixes of conventional and self-compacting FRC with either steel or plastic fibres was performed. Several analyses were conducted both for selecting the most relevant parameters and for maximizing the degree of correlation between the tests. The highest correlation coefficient between tests was obtained for the mixes with plastic fibres. In such case, the formulation proposed is able to predict the results with accuracy up to 75%. The correlation found is an interesting tool towards a simple and reliable quality control of FRC based on the BCN mainly oriented to large scale concrete production.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Intrinsic scatter of FRC: an alternative philosophy to estimate characteristic values10.1617/s11527-014-0420-6 ↗
2. CEN (European Committee for Standardization), EN 14651:2007: Test method for metallic fibre concrete, Measuring the flexural tensile strength (limit of proportionality (LOP), residual), Brussels, 2007.
3. B. Parmentier, E. De Grove, Dispersion of the mechanical properties of FRC investigated by different bending tests, Tailor Made Concr. Struct., 2008.
4. Double punch test to control the energy dissipation in tension of FRC (Barcelona test)10.1617/s11527-008-9391-9 ↗
5. NBN (Bureau de Normalisation), B 15-238, Test on fibre reinforced concrete – bending test on prismatic samples, Norme Belge, Institut Belge de Normalisation, Brussels, 1992.
6. Fracture properties of FRC determined through inverse analysis of wedge splitting and three-point bending tests10.3151/jact.3.423 ↗
7. M. Prisco, M.G.L. Lamperti, S. Lapolla. Double-edge wedge splitting test: preliminary results, in: Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-7), Jeju (S. Korea), 2010. pp. 1579–1586.
8. Double edge wedge splitting (DEWS): an indirect tension test to identify post-cracking behaviour of fibre reinforced cementitious composites10.1617/s11527-013-0028-2 ↗
9. Model Code 2010, fib Fédération Internationale du Béton, 2010.
10. Correlation of compressive strength and other engineering properties of high-performance steel fiber-reinforced concrete10.1061/(ASCE)MT.1943-5533.0001050 ↗
11. F. Minelli, G. Plizzari, Fiber reinforced concrete characterization through round panel test – part I: experimental study, in: Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-7), Jeju (S. Korea), 2010. pp. 1451–1460.
12. Tensile stress–crack width law for steel fibre reinforced self-compacting concrete obtained from indirect (splitting) tensile tests10.1016/j.cemconcomp.2014.12.010 ↗
13. Derivation of a simplified stress-crack width law for fiber reinforced concrete through a revised round panel test10.1016/j.cemconcomp.2015.01.005 ↗
14. AENOR (Asociación Española de Normalización y Certificación), UNE 83515, Fibre reinforced concrete, Determination of cracking strength, ductility and residual tensile strength, Barcelona test, Madrid, 2010.
15. Multidirectional double punch test to assess the post-cracking behaviour and fibre orientation of FRC10.1016/j.conbuildmat.2014.02.023 ↗
16. New analytical model to generalize the barcelona test using axial displacement10.3846/13923730.2012.756425 ↗
17. Constitutive model for fibre reinforced concrete based on the Barcelona test10.1016/j.cemconcomp.2014.07.017 ↗
18. On flow properties, fibre distribution, fibre orientation and flexural behaviour of FRC10.1617/s11527-007-9229-x ↗
19. High mechanical performance of fibre reinforced cementitious composites: the role of ‘casting-flow induced’ fibre orientation10.1617/s11527-010-9613-9 ↗
20. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
21. The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete10.1016/j.conbuildmat.2010.11.057 ↗
22. On the orientation of fibres in structural members fabricated with self compacting fibre reinforced concrete10.1016/j.cemconcomp.2011.09.005 ↗
23. Relation between fibre distribution and post-cracking behaviour in steel fibre reinforced self-compacting concrete panels10.1016/j.cemconres.2013.04.009 ↗
24. CEN (European Committee for Standardization), EN 12390-3, Testing hardened concrete, Part 3: Compressive strength of test specimens, Brussels, 2009.
25. Inductive method for assessing the amount and orientation of steel fibers in concrete10.1617/s11527-012-9858-6 ↗
26. Improved assessment of fibre content and orientation with inductive method in SFRC10.1617/s11527-014-0279-6 ↗
27. Post-cracking behaviour of steel fibre reinforced concrete10.1007/BF02480574 ↗
28. Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres10.1016/j.cemconcomp.2007.03.006 ↗
29. Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes10.1016/j.conbuildmat.2010.12.022 ↗
30. Flexural performance of fibre reinforced concrete made with steel and synthetic fibres10.1016/j.conbuildmat.2012.06.042 ↗
31. On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2014.01.024 ↗
32. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading10.1016/j.cemconcomp.2013.12.015 ↗
33. Steel fibre reinforced concrete. The effect on fibre orientation of compaction by vibration
34. Simple tools for fiber orientation prediction in industrial practice10.1016/j.cemconres.2011.05.008 ↗
35. Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis10.1617/s11527-013-0153-y ↗
36. Correlations in the behaviour of fibre reinforced shotcrete beam and panel specimens10.1007/BF02533584 ↗