Rust distribution and corrosion-induced cracking patterns of corner-located rebar in concrete cover
Source abstract
Abstract
Abstract In this work, the rust distribution patterns and concrete cover cracking behavior of corner-located rebar was studied by means of digital microscopy. The corner-located rebar with various cover thicknesses embedded in concrete specimens was exposed to artificial corrosive environments. The time-dependent evolution of rust distribution profiles around corroded rebar was measured and described by Gaussian models. The results show that for corner-located rebar, when the two side concrete cover thicknesses have the similar value, the onset of rust formation starts simultaneously and its rust pattern can be well described by two or three independent Gaussian functions. At the same level of corrosion, the cracking behavior of corner-located concrete can be considerably different, depending on the rust profiles and dimensional ratio of the two side concrete cover thicknesses.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Broomfield · 2002
2. Bertolini · 2013
3. Effect of reinforcement corrosion on bond strength10.1016/0950-0618(95)00077-1 ↗
4. Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements10.1016/j.cemconres.2011.06.006 ↗
5. Steel corrosion and corrosion-induced cracking in recycled aggregate concrete10.1016/j.corsci.2014.04.028 ↗
6. Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks10.1016/j.corsci.2017.01.002 ↗
7. Predicting the service life of concrete
8. Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation10.1016/j.conbuildmat.2016.02.194 ↗
9. Corrosion initiation time of steel reinforcement in a chloride environment—a one dimensional solution10.1016/S0010-938X(96)00163-1 ↗
10. Modeling of chloride ions diffusion in cracked concrete
11. Chloride ingress profiles and binding capacity of mortar in cyclic drying-wetting salt fog environments10.1016/j.conbuildmat.2016.10.059 ↗
12. Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion10.1016/j.engfailanal.2015.03.019 ↗
13. Comparison of uniform and non-uniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer10.1016/j.corsci.2011.05.017 ↗
14. Modeling corroded section configuration of steel bar in concrete structure10.1016/j.conbuildmat.2008.09.026 ↗
15. Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures10.1016/j.conbuildmat.2013.10.042 ↗
16. Propagation and model of distribution for corrosion of steel bars in concrete
17. Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures10.1016/j.cemconres.2010.03.018 ↗
18. Corrosion products of reinforcing bars embedded in concrete10.1016/0010-938X(93)90382-Q ↗
19. Chloride-induced corrosion of steel in cracked concrete–Part I: experimental studies under accelerated and natural marine environments10.1016/j.cemconres.2015.08.009 ↗
20. Influence of cracking on chloride diffusivity and moisture influential depth in concrete subjected to simulated environmental conditions10.1016/j.conbuildmat.2013.04.024 ↗
21. Model of chloride penetration into cracked concrete subject to drying–wetting cycles10.1016/j.conbuildmat.2012.05.027 ↗
22. Chloride penetration into concrete damaged by uniaxial tensile fatigue loading10.1016/j.conbuildmat.2016.08.096 ↗
23. Influence of flexural loading on chloride ingress in concrete subjected to cyclic drying-wetting condition10.12989/cac.2015.15.2.183 ↗