Study of the influence of sorted polymeric optical fibers (POFs) in samples of a light-transmitting cement-based material (LTCM)
Source abstract
Abstract
Abstract The aim of the present work is to investigate the mechanical behavior of LTCM (light-transmitting cement-based material) reinforced with POF (polymeric optical fiber) at three fiber contents (2%, 3.5%, and 5%) arranged in an orderly manner and compare it to the reference specimen free of fiber (% 0). To prepare the LTCM samples, Portland cement, fine aggregate, additive (silica fume), superplasticizer, POFs and water were used. The laboratory tests were determined in order to verify if the material addressed is suitable enough for commercial and structural (more than 30 MPa) application. The results obtained showed that the worsening of the mechanical properties of the composites and low grip of the fiber/matrix can be attributed to the parallel arrangement of the fibers and to the POF extremely smooth surface, thus compromising the grip. The POF did not effectively serve as a structural reinforcement and the SEM analysis revealed many gaps in this transition area, making it a porous and brittle material. The light transmittance increased with the fiber content increasing up to 5% POF. Considering the evaluating indicators, the present solution (for composites with up to 5% POF) is still suitable enough for commercial and structural application. In general LTCM is becoming a high-tech material that provides excellent performance and a wide range of applications but requires competent design and execution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A comprehensive review of solar facades. Transparent and translucent solar facades10.1016/j.rser.2012.02.059 ↗
2. S.L. Pagliolico, V.R.M. Lo Verso, A. Torta, M. Giraud, F. Canonico, L. Ligi, A preliminary study on light transmittance properties of translucent concrete panels with coarse waste glass inclusions, in: 6th International Building Physics Conference. IBCP. Energy Procedia, Elsevier, vol. 78, 2015, pp. 1811–1816.10.1016/j.egypro.2015.11.317 ↗
3. Experimental study of light transmitting cement-based material (LTCM)10.1016/j.conbuildmat.2015.08.055 ↗
4. Y. Li, Z.-Y. Xu, Z.-W. Gu, Z.-Z. Bao, Preparation of light transmitting cement-based material with optical fiber embedded by the means of parallel arrange. Advanced Materials Research. 2011 International Symposium on Chemical Engineering and Material Properties, ISCEMP, vol. 391–392, 2011, pp. 677–682.10.4028/www.scientific.net/AMR.391-392.677 ↗
5. http://www.litracon.hu/en.
6. L.J.M. Uribe, Development of the evaluation of translucent mortar with polymeric optical fiber. Master Thesis, Department of Civil Engineering, Federal University of Santa Catarina – Brazil, 2010.
7. Brazilian Association of Technical Standards (ABNT). NBR 13279: Mortar for laying and coating of walls and ceilings – determination of compressive and flexural tensile strength. Rio de Janeiro – Brazil, 2005.
8. Brazilian Association of Technical Standards (ABNT). NBR 15259: Mortar for laying and coating walls and ceilings – Determination of water absorption by capillary and capillary coefficient. Rio de Janeiro – Brazil, 2003.
9. Balaguru · 1992
10. Bentur · 2007
11. Fibre reinforced concrete: new design perspectives10.1617/s11527-009-9529-4 ↗
12. Mechanical behavior and fibre dispersion of hybrid steel fibre reinforced self-compacting concrete10.1016/j.conbuildmat.2011.08.044 ↗
13. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
14. Comparative flexural behavior of four reinforced cementitious composites10.1016/j.cemconcomp.2008.08.002 ↗
15. A.D. Figueiredo, Concrete with steel fibers. Technical Bulletin of the Polytechnic School of the University of São Paulo. Department of Civil Engineering – EPUSP. University of São Paulo – Brazil, 2000.
16. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
17. Mehta · 2014
18. T. Henriques, Analysis of the influence of polymer optical fiber inserted into mortar blocks. Master Thesis. Department of Civil Engineering, Federal University of Rio Grande do Sul – Brazil, 2013.