journal article·2018-02

Investigating fracture mechanics and flexural properties of unsaturated polyester polymer concrete (UP-PC)

M.J. Hashemi, M. Jamshidi, J. Hassanpour Aghdam

Publisher page

Abstract

Abstract Polymer concretes are particle composites of polymers which are filled by aggregates. Polyesters, epoxies and acrylics have been used as binders in these materials which polyesters due to their suitable properties and acceptable cost are considered by the most of industries. One of the most considered issues about polyester polymer concretes is their weak performance and the low durability against acids and alkaline solutions. In this research, fracture mechanics (CMOD and K1c) and flexural strength ( σ ) of a polyester polymer concrete after 1, 3, 6 and 12 months of exposure to sulfuric acid 0.5 and 1 mol lit and carbonate/bicarbonate alkaline solution 0.0622 and 0.1245 mol lit were investigated. Results showed that both of aggressive solutions degraded polymer concrete samples. However acids caused more decrement in flexural strength and alkaline had more destructive effect on fracture mechanics. Furthermore, the concentration was more important in destructive effects especially for alkaline solution. The highest decrease in flexural strength, fracture toughness and CMOD were 37%, 36.1% and 59% respectively. SEM analysis was used to assess morphological changes accrued at fractured surfaces of the samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Relation between hardness and compressive strength of polymer concrete10.1016/0950-0618(87)90033-X ↗
2. Effect of fly ash on the behaviour of polymer concrete with different types of resin10.1016/j.matdes.2013.03.078 ↗
3. Evaluation of mechanical strength of epoxy polymer concrete with silica powder as filler
4. Mechanical characterization of fiber reinforced polymer concrete10.1590/S1516-14392005000300023 ↗
5. Effects of thermal cycles on mechanical properties of an optimized polymer concrete10.1016/j.conbuildmat.2011.03.047 ↗
6. Thermal expansion of epoxy and polyester polymer mortars—plain mortars and fibre-reinforced mortars10.1016/S0142-9418(03)00021-7 ↗
7. Chemical resistance of epoxy and polyester polymer concrete to acids and salts10.1515/POLYENG.2002.22.1.27 ↗
8. The influence of notch depth on the fracture mechanics properties of polymer concrete10.1023/B:FRAC.0000009302.36274.e9 ↗
9. Effects of w/c ratio on Portland limestone cement concrete10.1680/coma.2010.163.2.71 ↗
10. Investigation on expansion of mortars containing Tuff natural pozzolan due to sulfate attack
11. Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and portland cement concrete10.1016/j.cemconres.2004.03.012 ↗
12. Rogers · 2003
13. Kinetic analysis and mechanical properties of nanoclay reinforced unsaturated polyester (UP) resins cured at low temperatures10.1002/pen.20309 ↗
14. An Investigation on fire and flexural mechanical behaviors of nano and micro polyester composites filled with SiO2 and Al2O3 Particles10.1016/j.matpr.2015.04.002 ↗
15. Fink · 2013
16. Dispersion and rheology of multiwalled carbon nanotubes in unsaturated polyester resin10.1021/ma3017844 ↗
17. Tensile properties of unsaturated polyester-based sisal fiber–glass fiber hybrid composites10.1177/0731684404041147 ↗
18. Comparative study of the dispersion and functional properties of multiwall carbon nanotubes and helical-ribbon carbon nanofibers in polyester nanocomposites10.1016/j.compscitech.2008.11.032 ↗
19. One-pot preparation of unsaturated polyester nanocomposites containing functionalized graphene sheets via a novel solvent-exchange method10.1039/c3ra42549e ↗
20. Mechanical and thermal properties of unsaturated polyester/calcium carbonate nanocomposites10.1177/0731684411424630 ↗
21. Mechanical properties of woodflour unsaturated polyester composites10.1002/(SICI)1097-4628(19981212)70:11<2121::AID-APP5>3.0.CO;2-Z ↗
22. Strength degradation of polymer concrete in acidic environments10.1016/j.cemconcomp.2007.04.001 ↗
23. Comparative assessment of isophtalic and orthophtalic polyester polymer concrete: Different costs, similar mechanical properties and durability10.1016/j.conbuildmat.2005.09.003 ↗
24. Influence of moisture content on the thermal and mechanical properties and curing behavior of polymeric matrix and polymer concrete composite10.1016/j.matdes.2013.01.075 ↗
25. Fracture assessment of polymer concrete in chemical degradation solutions10.1016/j.conbuildmat.2010.02.020 ↗
26. Leaching of cementitious materials by pure water and strong acids (HCl and HNO3)
27. Studies on chemical resistance of low water/cement ratio concretes10.1016/0008-8846(85)90087-0 ↗
28. Flexural behavior of polyester polymer concrete subject to different chemicals
29. Effect of cyclic exposure of chemicals on compressive strength of polyester resin based polymer concrete
30. Durability of polyester resin concrete in different chemical solutions
31. Parameters identification of polymer concrete using a fracture mechanics test method and full-field measurements10.1016/j.engfracmech.2011.08.013 ↗
32. The effects of atmospheric exposure on the fracture properties of polymer concrete10.1016/j.buildenv.2004.12.017 ↗
33. Analysis of stresses and strains near the end of a crack traversing a plate
34. Anderson · 2005
35. Freeze–thaw and thermal degradation influence on the fracture properties of carbon and glass fiber reinforced polymer concrete10.1016/j.conbuildmat.2005.06.021 ↗
36. Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 C10.1016/j.conbuildmat.2011.07.027 ↗
37. Fabrication and mechanical properties of clay/epoxy nanocomposite and its polymer concrete10.1016/j.matdes.2012.03.008 ↗
38. Polymer concretes: a description and methods for modification and improvement
39. Effects of displacement rate and temperature on the fracture properties of polymer mortars10.1016/j.conbuildmat.2014.01.017 ↗
40. Modified polyester resins as an effective binder for polymer concretes10.1617/s11527-011-9779-9 ↗
41. Effect of aging on the fracture mechanics of unsaturated polyester based on recycled PET polymer concrete10.1016/j.msea.2010.12.073 ↗
42. A comparative study on physical/mechanical properties of polymer concrete and Portland cement concrete
43. Mechanical properties of castor oil polymer mortars10.1590/1516-1439.241713 ↗
44. Mechanical behavior of piassava fiber reinforced castor oil polymer mortars10.1016/j.compstruct.2014.01.023 ↗
45. Fracture toughness improvement of epoxy resins with short carbon fibers10.1016/j.jiec.2013.06.053 ↗
46. ASTM · 1999
47. Effect of piassava lees in the fracture behavior of polymer mortars10.1016/j.compstruct.2012.07.008 ↗
48. Standard, A., E1290: Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement, in: ASTM, West Conshohocken, PA, 2008.
49. Corrosion behavior of epoxy and unsaturated polyester resins in alkaline solution
50. Mechanical characterization of polymer mortars exposed to degradation solutions10.1016/j.conbuildmat.2009.06.047 ↗
51. Acoustic emission waveform characterization of crack origin and mode in fractured and ASR damaged concrete10.1016/j.cemconcomp.2015.04.008 ↗