journal article·2018-04Open access

Predicting the rutting behaviour of natural fibre-reinforced cold mix asphalt using the finite element method

Hayder Kamil Shanbara, Felicite Ruddock, William Atherton

Abstract

This paper describes the development of a three-dimensional (3-D), finite element model (FEM) of flexible pavements made with cold mix asphalt (CMA), which has itself been reinforced with two different natural fibres: jute and coir. A 3-D finite element model was employed to predict the viscoelastic response of flexible CMA pavements when subjected to multiple axle loads, different bituminous material properties, tire speeds and temperatures. The analysis was conducted by the finite element computer package ABAQUS/STANDARD. The pavements were subject to cyclic and static loading conditions to test for permanent deformation (rutting). The accuracy of the developed model was validated by comparing the predicted results with those measured in the lab. Reinforced and unreinforced CMA mixture models were simulated in this research. The results indicate that the CMA mixtures reinforced with natural fibres, are effective in mitigating permanent deformation (rutting). These reinforcing materials can extend the service life of flexible pavements. © 2018 Elsevier Ltd
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Utilisation of natural fibre as modifier in bituminous mixes: A review10.1016/j.conbuildmat.2013.12.037 ↗
2. Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass
3. High performance cold asphalt concrete mixture for binder course using alkali-activated binary blended cementitious filler10.1016/j.conbuildmat.2017.02.155 ↗
4. New developments with cold asphalt concrete binder course mixtures containing binary blended cementitious filler (BBCF)10.1016/j.conbuildmat.2016.07.114 ↗
5. Effect of fiber types on relevant properties of porous asphalt10.1016/S1003-6326(06)60302-6 ↗
6. Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures10.1016/j.ijfatigue.2009.04.008 ↗
7. Experimental characterization of high-performance fiber-reinforced cold mix asphalt mixtures10.1016/j.conbuildmat.2014.01.089 ↗
8. Effects of amorphous metallic fibers on the properties of asphalt concrete10.1016/j.conbuildmat.2016.10.082 ↗
9. Evaluation and design of fiber-reinforced asphalt mixtures10.1016/j.matdes.2008.09.030 ↗
10. Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement10.1016/j.conbuildmat.2013.11.070 ↗
11. Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber10.1016/j.conbuildmat.2017.05.169 ↗
12. Fiber-reinforced asphalt-concrete – a review10.1016/j.conbuildmat.2009.11.009 ↗
13. Rutting prediction of a reinforced cold bituminous emulsion mixture using finite element modelling10.1016/j.proeng.2016.11.613 ↗
14. Using of 2D finite element modeling to predict the glasphalt mixture rutting behavior10.1016/j.conbuildmat.2014.06.057 ↗
15. On the characterization of flexible pavement rutting using creep model-based finite element analysis10.1016/j.finel.2004.03.002 ↗
16. Modelling of rutting of two flexible pavements with the shakedown theory and the finite element method10.1016/j.compgeo.2009.01.007 ↗
17. Kandhal · 2002
18. Laboratory observation of cracks in road pavements with GPR10.1016/j.conbuildmat.2017.08.022 ↗
19. Ultrasound data for laboratory calibration of an analytical model to calculate crack depth on asphalt pavements10.1016/j.dib.2017.06.053 ↗
20. Traffic-load-induced permanent deformation of road on soft subsoil10.1061/(ASCE)1090-0241(2002)128:11(907) ↗
21. Hybrid PSO and GA approach for optimizing surveyed asphalt pavement inspection units in massive network10.1016/j.autcon.2016.08.004 ↗
22. Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM10.1016/j.conbuildmat.2013.02.017 ↗
23. Finite element cohesive fracture modeling of airport pavements at low temperatures10.1016/j.coldregions.2009.02.004 ↗
24. Numerical finite element formulation of the 3D linear viscoelastic material model: complex Poisson's ratio of bituminous mixtures10.1016/j.acme.2015.02.003 ↗
25. Nonlinear elasto–plastic performance prediction of materials stabilized with bitumen emulsion in rural road pavements10.1016/j.advengsoft.2015.10.009 ↗
26. Numerical modeling of geogrid-reinforced flexible pavement and corresponding validation using large-scale tank test10.1016/j.conbuildmat.2016.06.081 ↗
27. Huang · 2004
28. The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions10.1016/j.conbuildmat.2012.12.023 ↗
29. Optimization criterion of viscoelastic response model for asphalt binders10.1016/j.conbuildmat.2016.02.184 ↗
30. Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS10.1016/j.conbuildmat.2017.02.152 ↗
31. European Committee for Standardization · 2012
32. European Committee for Standardization · 2012
33. European Committee for Standardization · 2005
34. A. Dulaimi et al. Laboratory studies to examine the properties of a novel cold-asphalt concrete binder course mixture containing binary blended cementitious filler J. Mater. Civ. Eng. 2017 29 910.1061/(ASCE)MT.1943-5533.0001975 ↗
35. A. Dulaimi et al. Performance analysis of a cold asphalt concrete binder course containing high-calcium fly ash utilizing waste material. J. Materi. Civ. Eng. 2017 29 710.1061/(ASCE)MT.1943-5533.0001883 ↗
36. European Committee for Standardization · 2003
37. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects10.1016/j.conbuildmat.2010.03.012 ↗
38. Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber10.1016/j.conbuildmat.2017.05.169 ↗
39. Polyamide fiber reinforced shotcrete for tunnel application10.3390/ma9030163 ↗
40. Effects of rice husk ash and fiber on mechanical properties of pervious concrete pavement10.1016/j.conbuildmat.2013.11.070 ↗
41. A mechanistic-empirical approach to quantify the influence of geogrid on the performance of flexible pavement structures10.1016/j.trgeo.2017.08.005 ↗
42. Dynamic response of concrete pavement structure with asphalt isolating layer under moving loads
43. Dynamic simulation of a flexible pavement layers considering shakedown effects and soil-asphalt interaction10.1016/j.trgeo.2016.04.003 ↗
44. Effect of temperature on the mechanical response of thermo-viscoelastic asphalt pavements10.1016/j.conbuildmat.2011.11.048 ↗
45. Evaluation of interlayer bonding condition on structural response characteristics of asphalt pavement using finite element analysis and full-scale field tests10.1016/j.conbuildmat.2015.08.031 ↗
46. Determination of shear and bulk moduli of viscoelastic solids from the indirect tension creep test
47. Effective temperature for predicting permanent deformation of asphalt pavement10.1016/j.conbuildmat.2017.08.118 ↗
48. Evaluation of fatigue crack behavior in asphalt concrete pavements with different polymer modifiers10.1016/j.conbuildmat.2011.08.017 ↗