journal article·2018-05

Reuse of waste sandstone sludge via alkali activation in matrices of fly ash and metakaolin

Marina Clausi, Ana M. Fernández-Jiménez, Angel Palomo, Serena C. Tarantino, Michele Zema

Publisher page

Abstract

This work aims at investigating the possibility of reusing sludge from sandstone sawing in alkaline cements. In particular, the behaviour towards alkali activation process of Pietra Serena sludge (sPS), either alone or in binary mixtures with class F fly ashes and metakaolin, was evaluated. The binders were synthesised with 8 M and 12 M NaOH solutions and cured at 85 degrees C for 5 or 20 h. Mechanical strength was determined after one day and the reaction products were characterized by XPRD, FTIR and SEMIEDX. Also colorimetry tests were performed. The alkali activation of sPS gives a material with limited amount of amorphous gel, in which unreacted particles can be still recognized, and showing a compressive strength of 3.6(2) MPa. The use of fly ashes and metakaolin in different proportions enhances mechanical strength up to 36(2) MPa. In these blends, the sludge acts basically like a filler. However, calcium carbonates present on the sludge partially dissolve and react in the alkaline mixture favouring the formation of some local high-calcium, high Si/AI ratio (C-A-S-H-type gel) areas co-existing with N-A-S-H-type gel. (C) 2018 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. The sandstones of Florentine historic buildings: individuation of the marker and determination of the supply quarries of the rocks used in some Florentine monuments
2. Geolithology and provenance of materials of some historical buildings and monuments in the centre of Florence (Italy)10.18814/epiiugs/2003/v26i3/017 ↗
3. Relationships between the petrographical, physical and mechanical properties of some Italian sandstones10.1016/j.ijrmms.2012.12.042 ↗
4. Pietra Serena: the stone of the Renaissance10.1144/SP407.11 ↗
5. Use of aggregates produced from marble quarry waste in asphalt pavements10.1016/j.buildenv.2006.03.012 ↗
6. Utilisation of high volumes of limestone quarry wastes in concrete industry (self-compacting concrete case)10.1016/j.resconrec.2006.12.004 ↗
7. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
8. Alkali-activated binders: A review. Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
9. Durability of alkali-activated fly ash cementitious materials10.1007/s10853-006-0584-8 ↗
10. Management and valorisation of wastes through use in producing alkali-activated cement materials10.1002/jctb.4927 ↗
11. Reuse of aluminosilicate industrial waste materials in the production of alkali-activated concrete binders, Handbook of Alkali-Activated Cements
12. Geopolymers and Related Alkali-Activated Materials10.1146/annurev-matsci-070813-113515 ↗
13. Chemical stability of cementitious materials based on metakaolin10.1016/S0008-8846(99)00074-5 ↗
14. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
15. Influence of metakaolin on the properties of mortar and concrete: A review10.1016/j.clay.2008.11.007 ↗
16. Geopolymers from low-T activated kaolin: Implications for the use of alunite-bearing raw materials10.1016/j.clay.2015.06.040 ↗
17. Metakaolin as a precursor of materials for applications in Cultural Heritage: geopolymer-based mortars with ornamental stone aggregates10.1016/j.clay.2016.08.009 ↗
18. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
19. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
20. Mid-infrared spectroscopic studies of alkali-activated fly ash structure10.1016/j.micromeso.2005.05.057 ↗
21. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
22. A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash10.1016/j.matdes.2013.07.074 ↗
23. Clay reactivity: production of alkali activated cements10.1016/j.clay.2012.10.012 ↗
24. Alkali-activated cements and mortars based on blast furnace slag and red clay brick waste10.1016/j.matdes.2015.06.182 ↗
25. Durability against wetting-drying cycles of water treatment sludge-fly ash geopolymer and water treatment sludge-cement and silty clay-cement systems10.1061/(ASCE)MT.1943-5533.0001351 ↗
26. New cements for the 21st century: The pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
27. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
28. Use of reservoir clay sediments as raw materials for geopolymer binders10.1179/1743676112Y.0000000064 ↗
29. Production and properties of foamed reservoir sludge inorganic polymers10.1016/j.cemconcomp.2013.03.017 ↗
30. Mechanical properties and microstructure of alkali activated Pisha sandstone geopolymer composites10.1016/j.conbuildmat.2014.06.051 ↗
31. Study on the strength development, hydration process and carbonation process of NaOH-activated Pisha Sandstone10.1016/j.conbuildmat.2014.05.075 ↗
32. Towards sustainable solutions for fly ash through mechanical activation10.1016/j.resconrec.2007.06.007 ↗
33. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
34. Improving reactivity of fly ash and properties of ensuing geopolymers through mechanical activation10.1016/j.conbuildmat.2014.01.095 ↗
35. The sequel of modified fly ashes using high energy ball milling on mechanical performance of substituted past cement10.1016/j.matdes.2015.10.109 ↗
36. Thermal dehydroxylation of kaolinite under isothermal conditions10.1016/j.clay.2013.07.017 ↗
37. Composition and microstructure of alkali activated fly ash binder: effect of the activator10.1016/j.cemconres.2005.03.003 ↗
38. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
39. Dedolomitization in different alkaline media: application to Portland cement paste10.1016/S0008-8846(03)00095-4 ↗
40. Experimental determination of plagioclase dissolution rates as a function of its composition and pH at 22 °C10.1016/j.gca.2014.04.028 ↗
41. Effect of calcium silicate sources on geopolymerisation10.1016/j.cemconres.2007.11.001 ↗
42. Thermal decomposition of dolomite and the extraction of its constituents10.1016/S0892-6875(97)00101-5 ↗
43. The effect of mechanical treatment on the crystal structure and thermal decomposition of dolomite10.1016/S0040-6031(99)00290-7 ↗
44. The thermal decomposition of dolomite10.1016/0040-6031(90)80228-Q ↗
45. Thermal behavior of natural dolomite10.1007/s10973-014-4301-6 ↗
46. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
47. H.F.W. Taylor, Cement Chemistry, Thomas Telford, 1997.10.1680/cc.25929 ↗
48. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
49. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
50. Investigation of novel waste glass and limestone binders using statistical methods10.1016/j.conbuildmat.2015.02.085 ↗
51. Study of thermal decomposition of natural and synthetic magnesium compounds10.1007/s11148-016-9880-2 ↗
52. Determining cement composition by Fourier transform infrared spectroscopy10.1016/1065-7355(94)00031-X ↗
53. Infrared attenuated total reflectance spectroscopy: an innovative strategy for analyzing mineral components in energy relevant systems10.1038/srep06764 ↗
54. Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicates10.1021/la026127e ↗
55. Quantitative determination of phases in the alkaline activation of fly ash. Part II: Degree of reaction10.1016/j.fuel.2006.04.006 ↗
56. B. O'connor, Chemical optimisation of the compressive strength of aluminosilicate geopolymers synthesised by sodium silicate activation of metakaolinite10.1039/b212629j ↗
57. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
58. Microstructure development of alkali-activated fly ash cement: a descriptive model10.1016/j.cemconres.2004.08.021 ↗
59. Relationships between composition, structure and strength of inorganic polymers10.1007/s10853-005-2794-x ↗
60. Chemical and structural microanalysis of aluminosilicate geopolymers synthesized by sodium silicate activation of metakaolinite10.1111/j.1551-2916.2009.03191.x ↗
61. Using fly ash to partially substitute metakaolin in geopolymer synthesis10.1016/j.clay.2013.12.025 ↗
62. Proposed structure for calcium silicate hydrate gel10.1111/j.1151-2916.1986.tb07446.x ↗
63. Technical and commercial progress in the adoption of geopolymer cement10.1016/j.mineng.2011.09.009 ↗
64. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
65. Definition of the procedure to determine the suitability and durability of an anti-graffiti product for application on cultural heritage porous materials10.1016/j.culher.2011.07.004 ↗
66. Compatibility of photocatalytic TiO2-based finishing for renders in architectural restoration: a preliminary study10.1016/j.buildenv.2014.05.027 ↗
67. Color stability in mortars and concretes. Part 1: study on architectural mortars10.1016/j.conbuildmat.2016.05.133 ↗