Effects of viscosity modifying admixture (VMA) on workability and compressive strength of structural EPS concrete
Source abstract
Abstract
Abstract The lightweight expanded polystyrene (EPS) concrete has the characteristics of vibration energy absorption and can be used to conduct the metro track of vibration reduction and isolation. But the workability and compressive strength of the lightweight EPS concrete need to be improved in the engineering application of vibration energy absorption when EPS beads are mixed in concrete. To improve the workability and compressive strength, this paper investigated the effects of viscosity modifying admixture (VMA) on the workability, segregation resistance, compressive strength and failure mode of a class of structural lightweight EPS concrete, prepared by controlling a certain water-binder ratio and fly ash replacement. The dosage of VMA in the mixtures was 0.02%, 0.04%, 0.06%, 0.08% and 0.10% by weight of the total cementitious materials (TCM), respectively. Workability was investigated through a multi-index of slump, slump flow, T50 and inverted slump cone time while segregation resistance was evaluated by a density test. The concept of anisotropy was employed to evaluate the compressive strength and failure mode. Results showed that VMA had significant negative effects on the fluidity of structural EPS concrete. From the density test results, VMA significantly enhanced the resistance to segregation and the segregation degree of EPS concrete exhibited a negative linear correlation with the dosage of VMA according to the definition of segregation index (SI). The compressive strength decreased substantially with increase of VMA and the anisotropy of the strength was shown to be inhibited gradually with increase of VMA, resulting from the improvement of resistance to segregation. As the elimination of anisotropy, the failure modes were altered consequently. In terms of the effectiveness to inhibit the segregation and the anisotropy, 0.10% by weight of TCM was recommended as the most effective dosage for VMA in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Expanded polystyrene beads as lightweight aggregate for concrete
2. A review of expanded polystyrene (EPS) properties, performance and new applications
3. Characterization and simulation of microstructure and properties of EPS lightweight concrete10.1016/j.cemconres.2007.08.028 ↗
4. Mechanical properties of expanded polystyrene lightweight aggregate concrete and brick10.1016/j.conbuildmat.2011.08.030 ↗
5. Effect of polystyrene aggregate size on strength and moisture migration characteristics of lightweight concrete10.1016/j.cemconcomp.2006.02.018 ↗
6. Compressive behavior of an idealized EPS lightweight concrete: size effects and failure mode10.1016/j.mechmat.2003.08.004 ↗
7. Experimental application of EPS concrete in the new prototype design of the concrete barrier10.1016/j.conbuildmat.2016.07.105 ↗
8. Mechanical and drying shrinkage properties of structural graded polystyrene aggregate concrete10.1016/j.cemconcomp.2008.01.002 ↗
9. Dynamic response of expanded polystyrene concrete during low speed impact10.1016/j.conbuildmat.2016.06.059 ↗
10. Taking into account the inclusions' size in lightweight concrete compressive strength prediction10.1016/j.cemconres.2004.06.002 ↗
11. Behaviour of lightweight expanded polystyrene concrete containing silica fume10.1016/S0008-8846(02)01055-4 ↗
12. Properties of lightweight expanded polystyrene concrete reinforced with steel fiber10.1016/j.cemconres.2003.12.014 ↗
13. Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash10.1016/j.conbuildmat.2012.02.049 ↗
14. ACI (American Concrete Committee), Guide for structural lightweight aggregate concrete, ACI 213R-14 (2014), Farmington Hills, MI.
15. Mechanical properties of polymer-modified concretes containing expanded polystyrene beads10.1016/j.conbuildmat.2005.08.001 ↗
16. An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene10.1016/j.conbuildmat.2011.04.018 ↗
17. Effects of anti-washout admixtures on fresh concrete properties
18. Effect of viscosity stabilizing agents on the properties of self-compacting mortars and concretes
19. Effect of viscosity type modifying admixture on porosity, compressive strength and water penetration of high performance self-compacting concrete10.1016/j.conbuildmat.2013.07.076 ↗
20. Evaluation of the fluidity and mechanical properties of light-weight self-compacting concrete containing expanded polystyrene (EPS)
21. Steel-concrete bond behaviour of lightweight concrete with expanded polystyrene (EPS)10.1617/s11527-013-0173-7 ↗
22. Durability of modified expanded polystyrene concrete after dynamic cyclic loading
23. Chinese Standard, Standard for test method of mechanical properties on ordinary concrete, GB/T 50081-2002, 2002, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing (in Chinese).
24. Self-leveling and stiff consolidated concretes for casting high-performance flat slabs in water
25. Chinese Specification, Technical specification for application of high strength concrete, JGJ/T 281-2012, 2012, Ministry of Housing and Urban-Rural Development of the People’s Republic of China, Beijing (in Chinese).
26. Performance of new viscosity modifying admixtures in enhancing the rheological properties of cement paste10.1016/S0008-8846(03)00233-3 ↗
27. Effects of antiwashout admixtures on properties of hardened concrete
28. The effect of viscosity modifying agents on mortar and concrete10.1016/j.cemconcomp.2007.01.004 ↗
29. Effect of cement and EPS beads ratios on compressive strength and density of lightweight concrete